Jump to content
SAU Community

Recommended Posts

Hi all,

A while ago I started a thread asking advice on buying an HR34, where a member here, Kinkstaahwas kind enough to share some good information for my purchase. In the end, a good ER34 came up and I bit the bullet. In hindsight, the HR34 would have probably been a better shout, seeing as basically everything will be swapped in the end anyway.

The new ER34 GTT is a 2 door, AT to MT swap car, which strangely had a 32 transmission (weak) swapped into it. It's in beautiful condition - bar a few scratches - as one of my main criteria for the car was to be as rust-free as possible.

The aim for this build will be to supplant the Z33 I had prior and become a frequent track day toy and also cover general weekend driving in Japan. I'll start a build thread once my first batch of parts comes through. I'm currently sitting on some Volks and Recaros which came out of the Z.

As of now, I'm experiencing an idle/deceleration/temperature problem with the car; thread can be found here if anyone has some insight regarding the problem: 

 

   

IMG-9196-1.jpg

IMG-9223-1.jpg

  • Like 2
Link to comment
https://www.sau.com.au/forums/topic/481762-new-er34-owner-based-in-japan/
Share on other sites

On 1/15/2021 at 4:00 AM, maddy400r33 said:

Do you see many Skylines being used in Japan. As normal cars?

Not as much as when i first visited back in 2015 - I was still seeing a fair few grannies and grandpas driving the 20de models about - plus usual tuners. I'll most likely see 1 or 2 if out and about now - usually modded - but they're certainly becoming rare.

Went to a meet the other day and saw a good 10-15 skylines there out of about 150 cars.  

On 1/15/2021 at 10:09 PM, MoMnDadGTR said:

nice whip mate,looking forward to seeing more on this car. still having issues with it? 

Cheers pal. Absolutely loving it. I'm accumulating suspension components now and should have it all sorted in the next month. 

Still having issues unfortunately. I've got a few troubleshooting avenues left to tick off then perhaps I'll try and take it to a shop. Luckily it's still very driveable at the moment.    

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I was using the wiring diagram I have So 12.74V is coming into the rear Fuel Pump relay as I measured.  When I turn the key to ON im getting 0.6V to the Fuel Pump plug; which i assume is backfeed voltage and doesnt include the 12V from ignition power.  The rear relay is working and being triggered.  From the diagram I clearly see the rear relay 80 = Rear Relay going into the Body/H loom (R-27) 27 = Fuel Pump plug going into the Body/H loom (T-20) 40 = Short Connector (R-27) I'm reading 12.74V on the blue/black wire which is the power for the Fuel Pump   From this diagram I can see the Ignition relay goes into the front and up to the ignition  2 = Fuel Pump Relay <1M> (R-27) 37 = ING Relay <1M> I started from the pump using this reference Which the way I read it (referencing Nissan wiring color codes) is: Pin Wire Color Function 1 B/P (Black/Pink) Ground 2 L/W (Blue/White)        ECU Trigger 3 SB (Sky Blue) Fuel Pump 5 L/B (Blue/Black) 12V Constant Tested SB to SB on Fuel Pump for continuity - confirmed Tested negative on Fuel Pump to 12V battery and L/B - confirmed 12V Pulled the relay putting 12V between Pin 1 & 2 and testing continuity on Pin 3 & 4 - confirmed relay   So that has me looking at this part of the circuit to understand whats happening here...and im still confused. From best I can tell; the disconnect is back to my previous diagram; between Ignition Relay and Fuel Pump Relay...which yet again; afaik is where the immobiliser should.    Thats what I was trying to explain to GTSboy; im not trying to fix it myself; yet I seem to have to get a Masters in Electrical Engineering (while im busy doing my actual job of DevOps & Cloud Engineering) somehow.  I just wanted more expert opinions; or more so that what I tested is correct and proves it to something around that area; to go back to the alarm tech (for a 3rd time) that he needs to fix it. He keeps telling me its not the alarm. He lives on the complete other side of the city so i understand not wanting to make a trip but as I said before if its the alarm it should be up to him to fix it. But he's adament its not; even though I pointed out the FP was immobilised through the original alarm. To my mind; it seems that the ECU is sending the signal; but the ignition is not getting 12V down the line.       
    • Maybe also really stiffly sprung track cars. Get the inside wheel up in a corner and all the fun stops. Also me sometimes (rarely) when I have to stand on the brake to convince the diff to drive the wheel that is still on the ground when I'm trying to diagonally get over severe driveway entrance, etc.
    • I feel like I'm missing something. You had an authorised installer come out and install a new alarm. Post install the car doesn't start, and you aren't getting the installer back to fix what they did wrong?
    • So either way it is gearbox out and look what is wrong?  I know about the input shaft bearing. Even before swap/new clutch the it sounded exactly like this: So is that inout shaft bearing or the other was installed backwards?  And can some please tell me the part number for that input shaft bearing? The gearbox is small box from R34 N/A and number is FS5W71C. Thank you  
    • I am yet to see anyone ever regret a quaife or helical. ...other than drifting/skidpan duties. I kind of want to upgrade my factory helical with a Quaife (but really it's not ultimately that different, and is a MASSIVE UNDERTAKING), that's how good the hype is about them, that I want to try them 'just to see'  
×
×
  • Create New...