Jump to content
SAU Community

how long to import a car?

DLuded
 Share

Recommended Posts

DLuded Mentor

DLuded

Posted
Posted

the car is getting on the boat 2morrow and was just wondering how long it should all take. ive been told the boat will arrive on the 20th of this month but id expect a few days later. how long does it take to go through customs? also how long will it take to get it ready for rego (its a 89 model so it will only need side intrusion bars and a few other little things)...

THX

Link to comment
https://www.sau.com.au/forums/topic/48204-how-long-to-import-a-car/
Share on other sites
raz0r$harP.UK Grand Master

raz0r$harP.UK

Posted
Posted

Well it depends on the condition of the car (ie how dirty it is). At the moment it seems that virtually all cars coming into Sydney need steam cleaning. Once the car arrives in port:

- usually Customs & AQIS inspect the next business day

- if it needs cleaning, allow one or two days for cleaning and an AQIS re-inspection

- pick it up from the wharves / steam cleaners and deliver to compliancers..

- ..which took me a week before it was ready. The compliance work itself was done in two days, but had to wait for the rest of the week for the engineer to finish his report.

- once that was done, I took it straight to the RTA and got it registered on the spot.

All up for my 89 import, 10 days from when it arrived in port until I had a rego sticker on my car.

RiverSide Proficient

RiverSide

Posted
Posted

Ordinarily it will take approximately 5 working days to go through customs/quarantine...however my last vehicle took 2 1/2 weeks!!

To avoid disapointment i would allow 2 weeks for customs and a week for compliance........that way if it is any earlier it will be a bonus.

MRK25T Experienced

MRK25T

Posted
Posted
Ordinarily it will take approximately 5 working days to go through customs/quarantine...however my last vehicle took 2 1/2 weeks!!

To avoid disapointment i would allow 2 weeks for customs and a week for compliance........that way if it is any earlier it will be a bonus.

I can beat that. I bought my car from auction in Japan early February 2002 and it was ready to get registered on July 15 2002. It stayed at the wharf for over a month and compliance took about a month too.

MRK25T Experienced

MRK25T

Posted
Posted
12 weeks for me.

 

Hi Mark - what's up ? What are you driving now ?? Got the Stagea ?? (Me and my family are having dinner at P's on Sunday .... Cheers)

 

Soz for OT

I'm getting around now in a Seat (spanish 2L small 4 door car).

P doesnt know yet but its possible I have another car on its way from Japan... waiting for photos and report from the importer.

PS don't let the cat out of the bag when you see her tommorow night - what time, i'll walk down and say g'day.

MRK25T Experienced

MRK25T

Posted
Posted
Hey who ya importing with?

my skyline im getting through j-spec is supposed to come through on the 20th. do you know the name of the ship its going on?

I spent 3 months looking for a 89 gtst through Prestige but none of their cars caught my eye. I've now swapped over to J-Spec and have found a car. They say it was inspected last Friday and the pics + report should be sent to me Friday night/Saturday morning. I havent recieved anything yet.

sktz-34 Collaborator

sktz-34

Posted
Posted

don't use J-Spec

i bought my R34 off them in January this year, and it arrived 2 weeks ago. they don't communicate so you've got no idea where the car is! the person at j-spec who organises compliance and shipping, etc, is lazy and very hard to get in contact with!

they put the wrong tyres on, and i got charged for them to get changed. they quoted $310 to ship the car from the compliance place in sydney to here (melbourne) and i got the bill today and it was $385! very unpredictable.

their site says 8-12 weeks from date of purchase, and mine took 24 weeks!

very disappointed overall!

RTFGTR Proficient

RTFGTR

Posted
Posted
don't use J-Spec

i bought my R34 off them in January this year, and it arrived 2 weeks ago. they don't communicate so you've got no idea where the car is! the person at j-spec who organises compliance and shipping, etc, is lazy and very hard to get in contact with!

they put the wrong tyres on, and i got charged for them to get changed. they quoted $310 to ship the car from the compliance place in sydney to here (melbourne) and i got the bill today and it was $385! very unpredictable.

their site says 8-12 weeks from date of purchase, and mine took 24 weeks!

very disappointed overall!

I am expecting mine on the 15th to land in oz. Bought on 15/06/04 on track for the 8 - 12 weeks...but agree with the lack of communication. Been trying for 6 days to get through, no response to email also.

sktz-34 Collaborator

sktz-34

Posted
Posted
I am expecting mine on the 15th to land in oz. Bought on 15/06/04 on track for the 8 - 12 weeks...but agree with the lack of communication. Been trying for 6 days to get through, no response to email also.

good luck - be prepared for a lengthy compliance process. mine took ages, then the paperwork took 5-6 business days to complete, and then the compliance plate had to be shipped from vic once the paperwork had been put through. all in all - compliance took 3 weeks.

but... u might have better luck if it's an older model.

predator Grand Master

predator

Posted
Posted
i bought my R34 off them in January this year, and it arrived 2 weeks ago. they don't communicate so you've got no idea where the car is! the person at j-spec who organises compliance and shipping, etc, is lazy and very hard to get in contact with!

heard similar.. i heard they were very good.. but like many places they've let the standard slip.

RTFGTR Proficient

RTFGTR

Posted
Posted
good luck - be prepared for a lengthy compliance process. mine took ages, then the paperwork took 5-6 business days to complete, and then the compliance plate had to be shipped from vic once the paperwork had been put through. all in all - compliance took 3 weeks.  

but... u might have better luck if it's an older model.

I have been told compliance will only be 5-7 days as it falls under the 15 year rule.

And untill this week (I have also heard of the holiday in Japan this week) getting in contact was good (not easy..but good) and I would have to say that information was informative and accurate. For a first import, I'm glad that J-Spec were helping me with the process.

Ship should have landed today?

  • 2 weeks later...
jaik Mentor

jaik

Posted
Posted

5 weeks from Payment till I had my Cefiro at home in my Driveway uncomplied. My car arrived at Freo on a Thursday night. I had it paid for at the shipping company by Friday morning, Customs Entry sent in for processing by 9am Friday, sent Fax to EPA in Sydney for Auth of Air Con removal Friday arvo, Car cleared Customs on Monday, Quarantine Inspeciton on Tuesday and the car on the road with permit by midday Tuesday. I dont buggerize around :P

JK

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • niZmO_Man
      R32 Nostalgia

      By niZmO_Man · Posted

      From my youth: GTi-R clutch change is a massive pain. The gearboxes are fragile? But the car is super cool and I want one 😢 
    • niZmO_Man
      New R32 owner soon

      By niZmO_Man · Posted

      Remember this is 1988 tech.
    • TurboTapin
      R32 GTST - 600KW+ RB28/CD009 Build

      By TurboTapin · Posted

      Driveline vibration is resolved. I ended up loosening all my engine mount and trans mount bolts, giving it a good shake then retightening everything and it's gone... Let's just say I was surprised that fixed it.  I've been happily driving it around again but unfortunately put zero time into my direct port/constant pressure WMI setup. I'm on vacation next week, so I'll try and finalize it then.  On a different note, I spent all week fuel/ignition mapping 2x 216L V16 engines. Turbo's were burning glycol and we swapped them out for larger units. We also had planned emissions testing on site, so I figured I'd be there the same week to use their instrumentation and massage any emissions issues out if needed. This was a first for me. Fuel management is similar in certain ways to automotive (i.e air density as load variable) but very different in others. It's all PLC based and AFR's are controlled by air and not fuel. They use a control valve between the turbo and air manifold to control pressure which in turn controls AFR's. Due to this, target AFR tables supplied by the OEM are in pressures and not mass which really through me off. They use air pressure vs fuel pressure tables. I also relied on an O2 concentration sensor the emissions team had in the exhaust. Ignition timing was also all over the place and we were losing a fair bit of power. They're now happily sitting at 16-40BTDC depending on load. We were making about 1600kw at 900rpm at 90% load. Engines were running a lot smoother as well.    
    • Duncan
      1992 R32 GT-R Race Car

      By Duncan · Posted

      heh, aint no R32 ever meeting modern targa cage rules unless the driver is veeeery short OP, good luck with the sale, since its already in the land of freedom I'm sure you will find a good buyer.
    • Duncan
      Oil pan for RB25DET NEO Stagea "version"

      By Duncan · Posted

      meh, it was a good video, clear about the issue and how he dealt with it. A bit heavy on the RTV and very brave to put an RB in anything without rebuilding it first, but otherwise I thought it was good Dose, I'm not sure that having the pickup forward is a big issue; yes of course the oil could shift under brakes but the sump should never be empty enough for that to be a problem (unless you also have a higher volume oil pump, and that oil can't return from the head to the sump quickly enough)
×
×
  • Create New...