Jump to content
SAU Community

SAU NSW - Dyno Day @ JEM - Saturday 22nd May


Recommended Posts

It is finally happening - SAU NSW's Dyno Day, hosted by Just Engine Management (JEM)!
 
SAU NSW Dyno Day Details
Date: Saturday 22nd May 2021
Time: 7:30am arrival (Dyno runs will commence at 8:00am)
Location: Just Engine Management, 2/2 Noonan Road, Ingleburn NSW 2565
 
 
Here's what you need to know:
 
Vehicles:
All vehicles will be separated into groups, to assist the JEM team with running all vehicles on the day. All vehicles will be separated into 3 groups: 2WD, AWD, vehicles over 500kW. Any vehicles that are expected to be below 500kW will be able to run on the standard dyno, however, any vehicle that is expected to be over 500kW will need to be run on the Hub dyno.
Please ensure your vehicle is free of any fluid leaks, and does not have any loose or unsecured items/parts. SAU NSW and JEM staff reserve the right to inspect vehicles prior to dyno runs, should a vehicle be suspected of not being in a suitable condition to operate on the dyno.
 
Pricing:
All pricing for the day has been separated to reflect vehicle type and requirements. Pricing to enter your vehicle is as follows:
 
Members Prices:
2WD - $85
AWD - $110
Cars over 500kW (Hub Dyno Required) - $160
 
Non-Members Prices:
2WD - $100
AWD - $125
Cars over 500kW (Hub Dyno Required) - $175
 
Entry prices provide you with 1x dyno run and associated graphs, which will include power, boost and air/fuel ratio, plotted over estimated RPM range.
 
Entries have been capped to a maximum of 40 cars for the day!
 
On the day:
Entrants are required to arrive at 7:30am to sign on, and to be organised into groups by SAU NSW and JEM staff. All entrants are to park on Noonan Road, and make their way to the SAU NSW tent to sign on. SAU NSW staff will be available on the morning to guide entrants on where to park.
 
As instructed, entrants will be instructed to retrieve their car, and bring it into the JEM carpark, for JEM staff to load vehicles on the required Dyno. All cars entering the JEM carpark will be guided to enter through the Williamson Road entry gate. After the Dyno run has been completed, entrants will be able to retrieve their car, and park again in Noonan Road (or as instructed).
 
Please ensure your car has sufficient fuel to complete the dyno run. Any further instructions will be provided by SAU NSW and JEM staff as required.
SAU NSW will be holding a sausage sizzle on the day for all to enjoy! Our latest merchandise will also be available for purchase! Both will be available at the SAU NSW tent.
 
A coffee van will also be available on the day to satisfy all of your caffeine needs!
 
SPECTATORS CAN ENTER FOR FREE!
 
All attendees must follow SAU NSW and JEM instruction at all times.
 
 
SAU NSW may film and photograph the event, for the purpose of event coverage, to be placed on SAU NSW social media sites and website.
 
To keep inline with the NSW Government's COVID requirements, we will have the following rules/requirements:
- A QR code will be available for all to scan at the SAU NSW tent.
- All people joining us will be required to check in upon arrival.
- Everyone will be required to maintain social distancing of 1.5m at all times.
- SAU NSW staff will be monitoring attendees for social distancing and will have the event QR code for all to scan.
A copy of SAU NSW's COVID Plan is available to view on our Facebook page.
 
One of the things that really sets our club apart is our commitment to being true enthusiasts. When on normal roads we strive to maintain good relations with the authorities as well as the public in general.
When attending one of Skylines Australia NSW events please try to:
• Be aware of surrounding environment and act accordingly.
• Drive courteously on the state’s roads as a true enthusiast should.
• Understand how important it is to maintain the good name of SAU:NSW and thus, treat others accordingly.
• Any misbehavior will not be tolerated and you will be asked to leave.
17 hours ago, Jasoncauser said:

Does the car need to be registered?

As in, can a unregistered Track Car go on?

Cheers

Jason

Howdy @Jasoncauser! Yes, track cars are fine on the dyno! Obviously you won't be able to operate the vehicle on the road though...

1 hour ago, r32-25t said:

There’s a quiet street right next to it

@Jasoncauser - What @r32-25t said... Noonan Road is the 'side street' that you can unload in. I'd suggest getting to the venue a little earlier than 7.30am (say 7.00am?) so you can have time to unload and get the car into the carpark.

Thanks for the reply Guys.
Good call on getting there early :)

Im keen to get it on a different dyno as the one ive been on was at a 4wd mechanics.
It was a dyno Dynamics roller but the shop (My Mates) works on 4wd's, not performance cars so not sure if their dyno may have been setup different.

Cheers

Jason

1 hour ago, Jasoncauser said:

Thanks for the reply Guys.
Good call on getting there early :)

Im keen to get it on a different dyno as the one ive been on was at a 4wd mechanics.
It was a dyno Dynamics roller but the shop (My Mates) works on 4wd's, not performance cars so not sure if their dyno may have been setup different.

Cheers

Jason

Mainline will read lower, and if that weather station is connected, even lower again (if the dyno cell is cold).

You could be silly and cover it LOL.

  • Haha 1
  • 2 weeks later...
  • 3 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I got back to Japan in January and was keen to get back on track as quickly as possible. Europe is god-awful for track accessibility (by comparison), so I picked up a first-gen GT86 in December just to have something I could jump into right away. The Skyline came over in a container this time and landed in early January. It was a bit battered after Europe, though—I refused to do anything beyond essential upkeep while it was over there. The clutch master cylinder gave out, and so did the power steering. I didn’t even bother changing the oil; it was the same stuff that went in just before I left Japan the first time. Naughty. Power steering parts would’ve cost double with shipping and taxes, so knowing I’d be heading back to Japan, I just postponed it and powered through the arm workout. It took a solid three months to get the car back on the road. Registration was a nightmare this time around. There were a bunch of BS fees to navigate, and sourcing parts was a headache. I needed stock seats for shaken, mistakenly blew 34k JPY on some ENR34 seats—which, of course, didn’t fit—then ended up having the car’s technical sheet amended to register it as a two-seater with the Brides. Then there’s the GT86. Amazing car. Does everything I want it to do. Parts are cheap, easy to find, and I don’t care what anyone says—it’s super rewarding to drive. I’ve done a few basic mods: diff ratio, coilovers, discs, pads, seat, etc. It already had a new exhaust manifold and the 180kph limiter removed, so I assume it’s running some kind of map. I’ve just been thrashing it at the track non-stop—mostly Fuji Speedway now, since I need something with higher speed after all that autobahn time. The wheels on the R34 always pissed me off—too big, and it was a nightmare getting tires to fit properly under the arches. So I threw in the towel and bought something that fits better. Looks way cleaner too (at least to me)—less hotboy, less attention-seeking. Still an R34, though. Now for future plans. There are a few things still outstanding with the car. First up, the rear subframe needs an overhaul—that’s priority one. Next, I need to figure out an engine rebuild plan. No timeline yet, but I want to keep it economical—not cutting corners, just not throwing tens of thousands at a mechanic I can barely communicate with. And finally, paint. Plus a bit of tidying up here and there.  
    • Nope, needed to clearance under the bar a little with a heat gun, a 1/2" extension as the "clearancer", and big hammer, I was aware of this from the onset, they fit a 2.0 with this intake no problems, but, the 2.5 is around 15mm taller than a 2.0, so "clearancing" was required  It "just" touched when test fitting, now, I have about 10mm of clearance  You cannot see where it was done, and so far, there's no contact when giving it the beans Happy days
    • It's been a while since I've updated this thread. The last year (and some) has been very hectic. In the second-half of 2024 I took the R34 on a trip through Germany, Italy, France and Switzerland - it was f*cking great. I got a little annoyed with the attention the car was getting around Europe and really didn't drive it that much. I could barely work on the car since I was living in an inner-city apartment (with underground parking). During the trip, the car lost power steering in France - split hose - and I ended up driving around 4,000kms with no power steering.  There were a few Nurburgring trips here and there, but in total the R34 amassed just shy of 7,000kms on European roads. Long story short, I broke up with the reason I was transferred to Europe for and requested to be moved back to Japan. The E90, loved it. It was a sunk cost of around EUR 10,000 and I sold it to a friend for EUR 1,500 just to get rid of it quickly. Trust me, moving countries f*cking sucks and I could not be bothered to be as methodical as I was the first time around.
    • I assume clearances were all a-okay?
×
×
  • Create New...