Jump to content
SAU Community

R32 GTR V-spec based in NZ

Fizurg

By Fizurg,
in Introduce yourself

 Share

Recommended Posts

Fizurg Explorer

Fizurg

Posted
Posted

Hey guys, I’ve been a long term lurker on this site and finally bought a black V-spec R32 GTR, with the only mods being a cat back and headunit. 
I plan to modify the car to increase performance but with mods that can be taken back to factory if I like. 
A lot of questions are likely to be about part choices at the moment so any help with that stuff would be very much appreciated. 6D9E72FC-358C-4FA4-9ED4-03C34BAF5337.thumb.jpeg.cf697b0a2119bddca550eb3c7016e705.jpeg1BCE05BB-0D3F-46A2-A8E4-4655BD8693C6.thumb.jpeg.4e139ab4f5ff9bb0391041370207c580.jpeg

Link to comment
https://www.sau.com.au/forums/topic/482727-r32-gtr-v-spec-based-in-nz/
Share on other sites
Fizurg Explorer

Fizurg

Posted
  • Author
Posted
On 12/08/2021 at 10:56 PM, Matty George said:

Beautiful ride bro. I have a 93 model and did the same thing with -9’s. At 490 hp with cams, gears on a haltech pnp. Enjoy bro performance is amazing from RB26’s

That’s pretty much the exact combo I plan to do. 

Matty George Collaborator

Matty George

Posted
Posted
On 13/08/2021 at 2:07 PM, Fizurg said:

What did you end up going with?

Focus on what you want. These forums are great and many lads give great advice. All I’d say is don’t have any regrets in what you do. Do it once and do it right.  I’ve seen to many throw money away by continually upgrading. I’m 43 years old and my 490 hp at the wheels is ample trust me. I wanted something streetable and it will never see a track. Smokes most things in my neighbourhood 🦾

C2DC6314-B8D9-4A5B-BA1D-C7C0621B7FF5.jpeg

Fizurg Explorer

Fizurg

Posted
  • Author
Posted
On 16/08/2021 at 1:36 PM, Predator1 said:

What he said ^. Do what you want. Mine just went downhil very very quickly, its in my profile if you want to read through.

If I could do it all over again, I'd stick with a built 26 with around 4-450awkw.

After speaking with the guy doing the work and the guy tuning it. I’ve decided to go with a 8374. It’s way more than what I thought I would want but it seems a really good option and I can always turn down the boost I guess. 

  • Like 1
Lithium Grand Master

Lithium

Posted
Posted
On 17/08/2021 at 7:56 PM, Fizurg said:

After speaking with the guy doing the work and the guy tuning it. I’ve decided to go with a 8374. It’s way more than what I thought I would want but it seems a really good option and I can always turn down the boost I guess. 

Nice choice!  The best responding RB26 I've ever been in was a stock bottom end one running an EFR8374 - though it DID have V-Cam as well.  Head and shoulders above any other RB26 I've experienced in terms of torque/response, and was also making ~460awkw.   Great option for having a nice road setup with plenty of headroom.

Who is doing the build?

Fizurg Explorer

Fizurg

Posted
  • Author
Posted
On 24/08/2021 at 10:19 AM, Lithium said:

Nice choice!  The best responding RB26 I've ever been in was a stock bottom end one running an EFR8374 - though it DID have V-Cam as well.  Head and shoulders above any other RB26 I've experienced in terms of torque/response, and was also making ~460awkw.   Great option for having a nice road setup with plenty of headroom.

Who is doing the build?

I saw some really good reviews on set ups like that. Hopefully the lack of vcam won’t affect it too much. 
mum almost through reading the EFR v2 thread. There is a lot of info in there. The internal vs external gate is interesting. Internal seems easier and cheaper and some of the people seem to swear by them, but the tuners I’m using think external is better so that’s what I will go for. I’m trying to get my head around the twin or single wastegate for the twin scroll manifold. I can see how in theory twins mean you retain a true twin scroll set up but as far as I can see, as soon as the gate opens then the twin scroll disappears and isn’t needed anyway. The tuners I’m using have said to use one wastegate. 
 

The engine, fitting and custom fabrication is being done by Hi-power and the tuning will be done by NDT developments. Both in Auckland. They were companies recommended to me. 

  • Like 1

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • RP1421
      S15 Spec R

      By RP1421 · Posted

      As discussed in the previous post, the bushes in the 110 needed replacing. I took this opportunity to replace the castor bushes, the front lower control arm, lower the car and get the alignment dialled in with new tyres. I took it down to Alignment Motorsports on the GC to get this work done and also get more out of the Shockworks as I felt like I wasn't getting the full use out of them.  To cut a very long story short, it ended up being the case the passenger side castor arm wouldn't accept the brand new bush as the sleeve had worn badly enough to the point you could push the new bush in by hand and completely through. Trying a pair of TRD bushes didn't fix the issue either (I had originally gone with Hardrace bushes). We needed to urgently source another castor arm, and thankfully this was sourced and the guys at the shop worked on my car until 7pm on a Saturday to get everything done. The car rides a lot nicer now with the suspension dialled in properly. Lowered the car a little as well to suit the lower profile front tyres, and just bring the car down generally. Eternally thankful for the guys down at the shop to get the car sorted, we both pulled big favours from our contacts to get it done on the Saturday.  Also plugged in the new Stedi foglights into the S15, and even from a quick test in the garage I'm keen to see how they look out on the road. I had some concerns about the length of the LED body and whether it'd fit in the foglight housing but it's fine.  I've got a small window coming up next month where I'll likely get a little paint work done on the 110 to remove the rear wing, add a boot wing and roof wing, get the side skirt fixed up and colour match the little panel on the tail lights so that I can install some badges that I've kept in storage. I'm also tempted to put in a new pair of headlights on the 110.  Until then, here's some more pictures from Easter this year. 
    • joshuaho96
      R32 GTS (RB20DE) Injectors Replacement

      By joshuaho96 · Posted

      I would put a fuel pressure gauge between the filter and the fuel rail, see if it's maintaining good fuel pressure at idle going up to the point when it stalls. Do you see any strange behavior in commanded fuel leading up to the point when it stalls? You might have to start going through the service manual and doing a long list of sensor tests if it's not the fuel system for whatever reason.
    • perry_r33
      R34 GTR Vspec Garage Sale - All must go!

      By perry_r33 · Posted

      Pm sent 
    • Robot
      Skyline v36 350GT sedan hunting on idle

      By Robot · Posted

      Hi,  Just joined the forum so I could share my "fix" of this problem. Might be of use to someone. Had the same hunting at idle issue on my V36 with VQ35HR engine after swapping the engine because the original one got overheated.  While changing the engine I made the mistake of cleaning the throttle bodies and tried all the tricks i could find to do a throttle relearn with no luck. Gave in and took it to a shop and they couldn't sort it. Then took it to my local Nissan dealership and they couldn't get it to idle properly. They said I'd need to replace the throttle bodies and the ecu probably costing more than the car is worth. So I had the idea of replacing the carbon I cleaned out with a thin layer of super glue and it's back to normal idle now. Bit rough but saved the car from the wreckers 🤣
    • GabsReDeal
      R32 GTS (RB20DE) Injectors Replacement

      By GabsReDeal · Posted

      After my last update, I went ahead with cleaning and restoring the entire fuel system. This included removing the tank and cleaning it with the Beyond Balistics solution, power washing it multiple times, drying it thoroughly, rinsing with IPA, drying again with heat gun and compressed air. Also, cleaning out the lines, fuel rail, and replacing the fuel pump with an OEM-style one. During the cleaning process, I replaced several hoses - including the breather hose on the fuel tank, which turned out to be the cause of the earlier fuel leak. This is what the old fuel filter looked like: Fuel tank before cleaning: Dirty Fuel Tank.mp4   Fuel tank after cleaning (some staining remains): Clean Fuel Tank.mp4 Both the OEM 270cc and new DeatschWerks 550cc injectors were cleaned professionally by a shop. Before reassembling everything, I tested the fuel flow by running the pump output into a container at the fuel filter location - flow looked good. I then fitted the new fuel filter and reassembled the rest of the system. Fuel Flow Test.mp4 Test 1 - 550cc injectors Ran the new fuel pump with its supplied diagonal strainer (different from OEM’s flat strainer) and my 550cc injectors using the same resized-injector map I had successfully used before. At first, it idled roughly and stalled when I applied throttle. Checked the spark plugs and found that they were fouled with carbon (likely from the earlier overly rich running when the injectors were clogged). After cleaning the plugs, the car started fine. However, it would only idle for 30–60 seconds before stalling, and while driving it would feel like a “fuel cut” after a few seconds - though it wouldn’t fully stall. Test 2 – Strainer swap Suspecting the diagonal strainer might not be reaching the tank bottom, I swapped it for the original flat strainer and filled the tank with ~45L of fuel. The issue persisted exactly the same. Test 3 – OEM injectors To eliminate tuning variables, I reinstalled the OEM 270cc injectors and reverted to the original map. Cleaned the spark plugs again just in-case. The stalling and “fuel cut” still remained.   At this stage, I suspect an intermittent power or connection fault at the fuel pump hanger, caused during the cleaning process. This has led me to look into getting Frenchy’s fuel hanger and replacing the unit entirely. TL;DR: Cleaned and restored the fuel system (tank, lines, rail, pump). Tested 550cc injectors with the same resized-injector map as before, but the car stalls at idle and experiences what feels like “fuel cut” after a few seconds of driving. Swapped back to OEM injectors with original map to rule out tuning, but the issue persists. Now suspecting an intermittent power or connection fault at the fuel pump hanger, possibly cause by the cleaning process.  
×
×
  • Create New...