Jump to content
SAU Community

Recommended Posts

hello!

if any of you have an r33 gtr and have an oil relocation kit installed, i would be grateful if you shared with me what you used as a mount point. i don't have the oil cooler, i think i will be purchasing an HKS (15004-AN004) kit down the road, but for now i have a greddy relocation kit. this thing doesn't exactly come with any kind of real instruction, just theoretical on how it should work. is there an existing bracket that i should be leveraging, or did you need to drill new holes in the engine bay to get the position correct?

is there anything i should know before taking this on?  i figured i'd put the adapter plate on the block and then bolt the relocation kit in an easy to access spot on the driver's side, cut the AN hosing to correct lengths and then make the connections.

thanks in advance for the recommendations and help!

There is a convenient space on the chassis rail just in front of the front diff where you can mount the filter upside down for ease of oil changes, nice and close to the sump plug too.

On 8/27/2021 at 9:08 PM, Duncan said:

There is a convenient space on the chassis rail just in front of the front diff where you can mount the filter upside down for ease of oil changes, nice and close to the sump plug too.

that seems really low! do you have a picture of what this looks like?

On 8/27/2021 at 9:08 PM, Duncan said:

There is a convenient space on the chassis rail just in front of the front diff where you can mount the filter upside down for ease of oil changes, nice and close to the sump plug too.

@Duncancan you tell me if this is the spot you're referencing?

 

IMG_1253.jpg

Sorry no pic, I moved mine to the wheel arch above the BOVs when I added a separate thermostat to the system.

It is easiest to see the spot from underneath, so, first jack up you car... But that location you've circled is about right, just attach it the remote mount to the side of the chassis rail.

The idea by having it low is that you are down there anyway to drain the oil, and mounting it upside-down low in the engine bay lets the oil that will inevitably come out during an oil change be caught in a pan instead of going all over your engine bay, or in the case of the standard location, all over the front diff to then dribble out over the next 5000klm as you drive around.

All of those high mount kits like the greddy one that are designed to go near the fuse box put the filter in a location that is easy to access, but pretty much guarantees messy oil changes.

  • Thanks 1
  • 2 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Wife wanted basket things in the wardrobe in our temporary house. Thought about ripping our the wardrobe and fitting the entire IKEA set, but it's a temporary house and we want to move in a few years. So IKEA advertises this as a 50cm unit, however the actually basket and rails measure 46cm wide. Only issue was depth, IKEA stuff is quite deep, where as the builder special junk is super shallow at less than 40cm. Send it, chopped the rails, then offset the mounting holes, job done, happy wife, less shit scattered all over the bedroom. Did the same to the other side too. Also drove the Skyline shit box today, dropped off oil at Supercheap Auto. I didn't realise they only now take max 2x bottles per visit. I visited 2x Supercheap Autos.  
    • I've seen similar actually in my situation. You never know what tables are attempted to be used when the car thinks it's -99C or +200C. The fail state is not usually that extreme but you know what I mean - it was in my case though! This is where being able to read all the sensors is useful cause you see this stuff really quickly.
    • The above is very important. However as long as you keep timing relatively low, it's plausible to make your own knock ears and plausible to learn to tune with a modern ECU that can do wideband O2 correction like a boost controller. I mean if you only have one viable road to even drive the car on, learning to tinker to this level may be worth doing given you can't do much else with the car...?
    • I find the fact that the rear plate has to be bent inwards at the rear not so bad: but the front is just awful: It's like come on. (these are my very old, now retired/turned in plates) TBH it is a lot of money to fix a minor issue, the fact I said "I'll never really spend the money on doing this" is why people ended up buying them as a gift for a 'car guy' who can be hard to shop for.. for car guy things.
    • I just bent the ends of my premo plates. It even went through Regency like that after the engine conversion and the inspector (a great bloke!) just squinted his eyes and said "I didn't see that". Plates, and how they look, are just something that have zero importance to me.
×
×
  • Create New...