Jump to content
SAU Community

Recommended Posts

58 minutes ago, Duncan said:

correct, although I understand you can leave ground off too if you want, the box is USB powered.

Gotcha, getting the occasional flash on the send LED however RealDash is stating it is "Connecting USB Serial" every 5 or so seconds, with a Timeout shown as well in Can Monitor. With the car running neither the Send or Rev. lights activate.

 

Is there anything I need to do on the Haltech NSP software? I would have assumed it would be able to intercept the CAN data without Haltech NSP needing to be updated. I believe Baud rate on realdash matches the adapter as well at 2000000, maybe this is too high?

Screenshot_20230203-155803.png

Screenshot_20230203-155800.png

I can't help with the Haltech side, but if the seeed adapter is not flashing it is not receiving or understanding the data.

And if it is flashing OK, if the CAN adapter is not showing live data CAN Monitor then the setup issue is at the Realdash end

6 hours ago, Borci88 said:

Is there anything I need to do on the Haltech NSP software? I would have assumed it would be able to intercept the CAN data without Haltech NSP needing to be updated. I believe Baud rate on realdash matches the adapter as well at 2000000, maybe this is too high?

Just a thought: do the settings match what is set on the Haltech? From what I understand baud rate, endianness and signedness need to be in sync as it determines the transfer speed and encoding. You mention 2,000,000 but your screenshot shows a CAN speed of 250kbps which is 250,000.

11 hours ago, soviet_merlin said:

Just a thought: do the settings match what is set on the Haltech? From what I understand baud rate, endianness and signedness need to be in sync as it determines the transfer speed and encoding. You mention 2,000,000 but your screenshot shows a CAN speed of 250kbps which is 250,000.

That's what I will look into today, I'm not sure haltech mentions anything in their software what their can rate is set to? I realise now I have the Endianness selected incorrectly in the app, however I think I did try big and little and had no luck.

5 hours ago, Borci88 said:

I'm not sure haltech mentions anything in their software what their can rate is set to?

The docs for the Haltech CAN keypad mention that it runs on 1,000kbps, so 1,000,000. See attached. The closest setting from the analyser docs seems to be 1,228,800. Have you tried setting it to that? But yeah, doesn't look like there is a lot of documentation from Haltech.

I'm impressed how quickly you got the adapter. I'm still waiting on mine.

keypad_specs.png

You may be mixing up the serial uart baud rate with the CAN bus speed. 

The haltech and CAN analyser need the have the same CAN bus speed (1mbs) and the CAN analyser and the Dash need the same serial baud rate.

Edited by alexj
  • Thanks 1
6 hours ago, soviet_merlin said:

The docs for the Haltech CAN keypad mention that it runs on 1,000kbps, so 1,000,000. See attached. The closest setting from the analyser docs seems to be 1,228,800. Have you tried setting it to that? But yeah, doesn't look like there is a lot of documentation from Haltech.

I'm impressed how quickly you got the adapter. I'm still waiting on mine.

keypad_specs.png

Did you buy yours from Seeed directly? I bought from Pakronics after seeing they were located in Thomastown and took the gamble that they weren't shipping from China.

3 hours ago, alexj said:

You may be mixing up the serial uart baud rate with the CAN bus speed. 

The haltech and CAN analyser need the have the same CAN bus speed (1mbs) and the CAN analyser and the Dash need the same serial baud rate.

Yep got it working, baud rate matches as well as can bus speed. RealDash just doesn't seem to have a nice gauge setup purely for temps and pressures, I don't need anything with a Speedo and tacho!

  • 3 months later...
On 2/3/2023 at 2:45 PM, Borci88 said:

Alright so I have all the parts required to try this out on a Haltech. Am I right in assuming that I am only using the hi and lo CAN wires and the ground? And that the power wire remains unused?

PXL_20230203_034344437.jpg

Just an FYI @Borci88 - try not to be too rough with the USB end of these adapters - I've just had the USB connector snap off the board internally, taking the solder pads with it - I suspect due to vibration in the car, over 24 months.

Have since found the 'MeatPi WiCAN' that looks to be almost identical - however also features Bluetooth, WiFI and can be powered off a 12V source, rather than USB powered like the SeeedStudio adapter.
https://www.meatpi.com/products/wican

There also looks to be a USB-C version without Bluetooth and WiFI:
https://www.tindie.com/products/meatpi/meatpi-usb-dual-can-adapter/

Edited by jdniss

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Seat of the pants assessment of the new intake: The car is way less "doughy" when hitting the loud pedal, especially off idle when stopped or in traffic, I did use a cheapo lazer thermal thingo to measure the temp around where the pod filter got its air, it was between 55 - 60°C, in saying this the car was shut off and not moving, so the OEM intake pipe was not supplying any fresh air to where the pod was when the car was at least moving A weird bonus was induction noise on the throttle in the cabin increased a bit,  I was worried that I was actually going to lose some of that induction noise I love so much, outside though, when I got the daughter to do a WOT drive by pass for me, the induction noise has increased alot when on the throttle, not quite ITB doort, but well up there I'm extremely happy with the results and have been exploring the country roads in the region  As for house mods: 1.New front fence is up and is awesome, it really upgraded how the joint looks from the street, and the added security is nice 2. Electricians have replace some interior lights, and with more lighting in the garage, a few new motion detecting lights out the front above the garage, front room, and at the front door, which I have already found heaps helpful coming and going, also now has fancy pants CCTV all round the house The only hold point for power though is the solar and batteries due to supply issues, although this will happen over the next few weeks 3. I have done a heap of landscaping out the front and I'm almost ready to do a new small retaining wall with some nice blocks to replace the brick and cemented in rocks around the raised garden beds cemented in river stone "was the fashion at the time" the house was built. I currently have a pallet of retaining wall blocks and 2 bulka bags of 20mm blue metal to replace the wood chip that is in the raised garden beds around the house 4. I now have 3 big raised garden beds for out the back to grow some vegetables, about 70cm high, 200cm long and 100cm wide 5. My 2 compost bins are already pretty full with brown, green and kitchen waste from the landscaping I'vedone so far, but they will probably take a few months to break down, so anything else that gets chopped, trimmed, and kitchen waste will just start filling the base of the raised garden beds to about 30cm before I start throwing 40cm of good compost, and stuff, for the vegetables to grow in, I'll need a few ton of compost and soil, but the local supplier can sent me bulka bags of the stuff Basically the logs, wood chips and a few strategically placed rocks for drainage, will give the beds some good organic materials down low to break down over time, and they will hold moisture during the warmer months to save the water in my big arse water tank if we don't get alot of rain So, all in all, the car and house mods are going well, and I'm really enjoying being retired, I sleep in too 0700 and slowly plod around inside until I feel like actually doing anything, and only work in the yard for as long as want, which has actually been alot over the last few weeks,  although when you look at it, it seems that not a huge amount of work has been done,  until I look at the before I started the work pics Happy days and good times indeed 
    • hahaha yeah. Plan is to get side skirts and probably just rear pods. But going to do them one-by-one. I've got a set that I really like from RHDJapen, but that one isn't shipped to AU. So need to find someone who can get it for me
    • Here's an idea, answer the questions I asked you as they are trying to work out WHY the LSD will be binding up in a straight line.
    • You haven't driven many modern cars then have you? Most of them have sfa steering feel with their stupid electric bullshit steering systems.
×
×
  • Create New...