Jump to content
SAU Community

Recommended Posts

6 minutes ago, GTSBoy said:

A local motor trimmer can usually redo a steering wheel at a reasonable cost. I say "reasonable", but nothing involving manual labour is really reasonable compared to buying a new Momo or similar.

Yeah thats i what i was thinking, prob still the best option, BYO cover and pay for install

1 hour ago, ChrisW434 said:

BYO cover and pay for install

I don't know where you would get a cover that you would prefer a trimmer to use over the cover that a trimmer would build from scratch from your choice of nice leather, or alcantara or whatever. Keep in mind that with the wheel you showed, you have to re-pad and cover the entire thing (except the hornpad/airbag part), not just the rim. The rim and the spokes are all the same thing. They all need to be under the same sewn expanse of fabric (or plasti-rubber, or whatever you do on top), with seamless padding from the edges of the spokes out onto the rim.

There are a number of crowds in Oz that speciailise in rebuilding steering wheels. They can redo them to factory spec, or you could go leather. Just do a google for "steering wheel restoration australia".

20 minutes ago, GTSBoy said:

I don't know where you would get a cover that you would prefer a trimmer to use over the cover that a trimmer would build from scratch from your choice of nice leather, or alcantara or whatever. Keep in mind that with the wheel you showed, you have to re-pad and cover the entire thing (except the hornpad/airbag part), not just the rim. The rim and the spokes are all the same thing. They all need to be under the same sewn expanse of fabric (or plasti-rubber, or whatever you do on top), with seamless padding from the edges of the spokes out onto the rim.

There are a number of crowds in Oz that speciailise in rebuilding steering wheels. They can redo them to factory spec, or you could go leather. Just do a google for "steering wheel restoration australia".

Well that actually sounds better. I'll chase that option up, happy to pay for a quality job. Thanks for the advice!

4 hours ago, ChrisW434 said:

Whoa, not so sure about that option 😄

So....you think you will get one covered for less than $600....that's lineball IMO.  Do your homework, but it is hard to find a business that does Skyline type wheels.  We fall into a black hole that nobody cares about/  There are restorers that work on older sold wheels for Chevies and EH Holdens etc, then there are those that work on R35/Porsche/BMW wheels.  I found it very hard to find anyone that works on our era cars...nobody seems interested.

Try a few upholstery businesses, but I'd doubt you will get it that much cheaper, as GTSBoy said, labour isn't cheap.  And a Momo in good condition will set you back over $1,000.  Remember you will need to keep your airbag setup.....and that raises the cost.

 

59 minutes ago, tridentt150v said:

So....you think you will get one covered for less than $600....that's lineball IMO.  Do your homework, but it is hard to find a business that does Skyline type wheels.  We fall into a black hole that nobody cares about/  There are restorers that work on older sold wheels for Chevies and EH Holdens etc, then there are those that work on R35/Porsche/BMW wheels.  I found it very hard to find anyone that works on our era cars...nobody seems interested.

Try a few upholstery businesses, but I'd doubt you will get it that much cheaper, as GTSBoy said, labour isn't cheap.  And a Momo in good condition will set you back over $1,000.  Remember you will need to keep your airbag setup.....and that raises the cost.

 

I'm not sure about what the work would cost locally yet, hence the question and request for info. I don't know if $600 is realistic here in Aust, just not keen to get the wheel sent to Singapore (or anywhere overseas for that matter).
 

Trying to see what others have done successfully. Seems like there's few different ways to go about it, but quality work isn't cheap, i do agree.

Maybe a company like the one below...?

36EEF2C6-8F4F-452C-87D5-0E30F71D2200.jpeg

Edited by ChrisW434

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I wasn’t able to replicate the sound anymore. It was a one time sound so maybe it was just coincidence but it was like small pebbles being dropped in a coke can.   should I try cleaning the MAF? It could be it’s functioning but dirty? I don’t know.
    • Update 4: Hi all. The car drives again! Haven't driven for long, only to store it in the garage again, but the test drive was successful. The coolant and oil leaks seem to be fixed for now. Temps on the engine were also very good, while moving I never even saw 80C water during the approx. 30 minute drive. Ate up all the coolant in the reservoir though so will have to fill that even more when I go to the car next time. One thing that pisses me off is that the RPM gauge is still f**ked, I even resoldered the board twice and used copper paste on the silly screws that are used as connections. Next time I take it out I'll take apart the board and fit new components, I'll see if I can get a replacement IC for it.  I have an appointment set for 22nd of September for the engine tune to 370hp. Alignment also still needs to be done. My hope is that I can get all the legal stuff over with by the end of this season. Anyone of you have advice regarding intercoolers? Currently there is an APEXI core fitted, one of those weird hybrid ones, 600x270x76. I don't think it's bad but it's not new and now I still have the chance to change it now to legally include it in the paperwork. Only issue is that the only options that would arrive in time are a HKS Type R intercooler or generic Ebay spec intercoolers comparable to a JustJap one. Ideally I'd order a Plazmaman but it takes over a month to receive which would mean making the car legal has to wait until next season. Would love to hear some input on this. Same story for my injectors, the previous owner was a nunce and put ID 1050x on the engine. They work but are obviously not ideal at "normal" power levels. But I don't see a reason to change them unless the tuner says it's necessary. I read online before buying a different exhaust that the top secret style rear diffusers won't fit due to the size of the rear resonators. My buddy and I made it work by slightly "adjusting the shape" of the mounting bracket and making some spacers out of 3d print for the mounting bolts. Fits like a charm. Just putting this here in case someone has this problem. Even the hefty HKS Silent Hi Power rear can fits without hitting anything.
    • Well they got my money but they are not getting my gearbox ! 
    • It's needed for rolling idle up, and I think it is a decider on VCT also.
    • I mean, not really. Link ECU's can absolutely still have errors from the ECU thinking it's getting a sensor it's not expecting. I would imagine the speed at the ECU level in Nistune does absolutely nothing anyway? I assume the ECU does not do any fancy TC stuff with regards to front+rear wheel speed or anything of that like anyway. Someone who uses Nistune may be more fluent in it. 
×
×
  • Create New...