Jump to content
SAU Community

Recommended Posts

"Worth it" depends what you want from the car....if you love the car and want to keep it long term it is probably a good option.

If you just want to get to Woolies faster, you would be better buying something more modern.

It would probably cost a few thousand, even if you find second hand factory turbo parts. You need

Exhaust manifold

Turbo

Water and oil lines for the turbo (and places to tap them into the existing systems)

Dump pipe to suit (often custom)

Exhaust to suit

Intercooler in intake

New ECU and tune

Larger injectors

Boost control

Depending on power goal - new clutch or auto trans upgrade

probably plenty of other things I haven't thought of, but that would be a few thousand to start.

Or buy my car. :D

That said, I don't think I'd sell, because I know what it'd take to do it again. Really you're buying/building a complete car from scratch that just happens to have the body you like. It is never 'worth it'. It is far more sensible to sell it as is, then go buy a Mustang. MUCH easier, and cheaper too.

Let's just say that it is probably more "worth it" now than it has even been. Given the relative unavailability of GTTs and the elevated prices for them if you can find one for sale, doing the work required to turbo an NA car is not as financially silly as it used to be.

It's still financially silly. Just not as bad as it used to be.

Better option is still to do what Greg did. Put an LS in it. Or put a VQ37 in it (if you can handle the obscene noise they make). Add valley mounted intercooled supercharger for boostiness without needing to plumb up turbos. Hopefully add some more tasteful noise to drown out the exhaust too.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Yes, I know🙄 but the sequential is not in my budget... don't want to reduce power neither, so looks like I'm stuck in the rabbit hole🤣
    • You’ll be very upset when you bust that too not to mention the gearing totally sucks. Don’t do it.
    • Is the panel filter one that is oiled? Have you ever cleaned or touched the AFM?
    • So.... the K&N air box thingo was too big, ended up gifting it to a mate, well, by gifting it he actually supplied food and beer at the pub,  which was nice, as it will not sit on a shelf in the garage for the next 10 years I did trim up some of the existing stuff to neaten it all up and gave it some wrinkle paint, unfortunately it currently has a used and abused mish mash of different types of hose clamps, 4 big fat T bolt type (shit), and a few normal clamps of vairing sizes and brands, but..... only until the 6 constant tension black worm clamps that I ordered from EFI solutions turn up next week Currently the current hose clamps are triggering me hard, LOL Is this the final version, probably not, I really want just 2 silicone pieces, a straight bit of silicone from the filter to the MAF is easy and will happen as soon as I head into Just Jap tomorrow, the problematic part is a 30° silicone bend from the MAF to the TB that I can connect the engine breather from the head, I found that there are bulk head fittings for boat bilge pumps that should work, but until I can get a 30° silicone bend the alloy pipe, and the 11ty thousand hose clamps, are there for the foreseeable future 4 hose clamps are golden, 6 are grudgingly acceptable, the 8 currently holding it all together is just taking the piss    I've also ordered 60 more retaining wall blocks for the front yard, I mis-gonculated the height that was required to get above the base of the Photinia's (red robin's) that are the hedge behind the front fence, currently it is 2 blocks high, and about 1/2 a block short, so going 3 blocks high will be above the base of the red robin's, and allow some room for mulch
    • It is the stock air box with the panel filter. Everything else is stock except the exhaust at this point, as I also went back to the cleaned 270cc injectors. I will check the RPM when the IACV is unplugged and report back.
×
×
  • Create New...