Jump to content
SAU Community

Correct Boss Hub for R32 GTST

Zabuza

By Zabuza,
in Exterior & Interior Styling

 Share

Recommended Posts

Zabuza Apprentice

Zabuza

Posted
Posted

Hey all , I was wondering if someone could point me in the right direction in finding the correct aftermarket steering wheel hub for my car. I have a 93 (so late model) R32 GTST coupe with Hicas. I’ve already tried 2 different HKB hubs which were ON-110 and ON-115 and both are 1 notch off from top dead center so they keep throwing my Hicas light. Does anybody know which HKB hub is the right one for my specific car? Also fine with a different brand hub if anybody knows what will work, just want my wheel to be straight and my light to stay off lol 

Link to comment
https://www.sau.com.au/forums/topic/485191-correct-boss-hub-for-r32-gtst/
Share on other sites
Duncan Grand Master

Duncan

Posted
Posted

I'm confused by "one notch off from top dead centre". If you rotate it one notch is HICAS happy?

If so, I think the issue is more likely your tie rods have been set unevenly in a previous alignment, so put the boss on straight and get the alignment checked.

It won't be an issue with a nissan style boss being wrong, there are billions of cars running them with no problem

Zabuza Apprentice

Zabuza

Posted
  • Author
Posted (edited)

@Duncan don’t believe it’s alignment or suspension related because my oem wheel sits perfectly straight and my car doesn’t pull one way or the other and with the oem wheel Hicas is indeed happy. What I’m referring to is the hubs I have always want to slide on to the steering column splines either one notch to the left or one notch to the right instead of sliding on straight like the oem wheel. From what info I have found , it seems the early model year 32’s and the later model year’s have a different number of teeth on the spline so I believe that is the problem, I’m just not sure which hub will have the right tooth count to match my steering column. 

Edited by Zabuza
GTSBoy Grand Master

GTSBoy

Posted
Posted
1 minute ago, Zabuza said:

it seems the early model year 32’s and the later model year’s have a different number of teeth on the spline

Not possible for the spline count to be different and put the wrong one on.

Is your hub actually capturing the steering angle sensor drive tab? Not putting it on upside down or otherwise clocked wrongly?

Zabuza Apprentice

Zabuza

Posted
  • Author
Posted
12 minutes ago, GTSBoy said:

Not possible for the spline count to be different and put the wrong one on.

Is your hub actually capturing the steering angle sensor drive tab? Not putting it on upside down or otherwise clocked wrongly?

Fair point, maybe it’s not the number of teeth that’s different but the orientation of them? I mean I’m going by the arrow labeled “top” on the hubs when I try to line it up so don’t think it could be going on upside down. I saw a chart someone made a while back that showed what different boss hubs supposedly fit all of the different 32 models and variants but I can’t find the damn thing and it was kind of confusing hence why I probably bought the wrong one. When I have it apart again I can post pictures to help explain.

Zabuza Apprentice

Zabuza

Posted
  • Author
Posted

Ok after looking at DriftWorks site it appears the ON-110 I tired is for an earlier model year and the ON-115 they have labeled as GTR specific, so I’m going to give ON-112 a try as the description they give says it’s for late model skylines with Hicas. Fingers crossed , had no clue so many different variants of hub existed.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Duncan
      Lock up the old for sale / wtb threads.

      By Duncan · Posted

      Ha, I've never pressed the X in all these years incase it removed the notification for all Admins
    • Duncan
      Blue/grey smoke after idle

      By Duncan · Posted

      I don't know, I've never done it that way, but 1. While it is an interference engine, there is still clearance between the valves and the piston at all points in the regular timing cycle 2. There is not a lot of distance before you can't catch the top of the valve stem any more I don't know if 2 is greater or less than 1. But 3. If it doesn't work out you are f**ked, engine is coming out to disassemble so it is a big bet.
    • Duncan
      Unpeeling the Orange

      By Duncan · Posted

      Semi slicks are horrible for road use, just use a high performance road tyre unless you really need the maximum grip. Noisy, unpredictable (amazing, until they are not), expensive due to very high wear and not good in cold and particular wet. And yes, it is a thing to store cars on stands instead of tyres if you know they are going to be parked up long term.....but who ever realises that a short park is going to stretch into years before it is out again!
    • MBS206
      Unpeeling the Orange

      By MBS206 · Posted

      I know in Australia you'll definitely get above 30c. Parked in the shade in Summer you'll be above that. 😛 But in cooler climates, you might get that warm driving on the highway for a bit, but you'd never get to full heat temp. I'll try and find some of my historical tyre temps between Aus summer and winter (be aware immin the warmer area of Aus too.)
    • sunsetR33
      Blue/grey smoke after idle

      By sunsetR33 · Posted

      I get that taking off the head is best but that's a bit much for "just" valve seals. I was just under the impression that one would be able to rotate to TDC and be able to temporarily drop the valve without losing it and effectively having to remove the head to then recover it. I never knew people actually pushed rope into the cylinder to do valve seals hahaha So just to confirm, just going to TDC will not work? In that case I know when I do valve seals I'll maybe just remove the head and do some other things while I'm there, or just wait until I do an engine build.
×
×
  • Create New...