Jump to content
SAU Community

Fuel pressure falls to zero at idle and stalls.

Tim32
 Share

Recommended Posts

Tim32 Apprentice

Tim32

Posted
Posted (edited)

Hey guys, I did a smoke test this week chasing vacuum leaks and found two leaks which I fixed up... Now having a weird issue where it starts and at idle after a few seconds the fuel pressure suddenly goes to 0 and stalls.. if I blip the throttle, it will regain pressure and keep going though. I put a new fuel filter on and drained the old fuel and put new fuel in but maybe thats stirred up some crap in the fuel tank and blocked the intake or something??? Any other ideas? FPR stuffed?

EDIT: Also, when it stalls, the pump primes and pressure goes back up and it starts again as per normal and happens all over again.

Edited by Tim32
joshuaho96 Veteran

joshuaho96

Posted
Posted
1 hour ago, Tim32 said:

Hey guys, I did a smoke test this week chasing vacuum leaks and found two leaks which I fixed up... Now having a weird issue where it starts and at idle after a few seconds the fuel pressure suddenly goes to 0 and stalls.. if I blip the throttle, it will regain pressure and keep going though. I put a new fuel filter on and drained the old fuel and put new fuel in but maybe thats stirred up some crap in the fuel tank and blocked the intake or something??? Any other ideas? FPR stuffed?

EDIT: Also, when it stalls, the pump primes and pressure goes back up and it starts again as per normal and happens all over again.

Check your FPCM. What happens if you bypass it? The ECU will bypass it during prime + initial start, then the FPCM kicks in and slows the pump down.

MBS206 Grand Master

MBS206

Posted
Posted

If you've been mucking with vacuum lines, start there, and check you have your vac line on properly, and on a vacuum line that isn't flowing air, it's just a vacuum source.

 

When you measure your fuel pressure, are you measuring absolute fuel pressure, or gauge pressure compared to the inlet manifold?

Tim32 Apprentice

Tim32

Posted
  • Author
Posted

Hey guys, thanks for the replies! (We are noobs so sorry if some of this seems obvious or is completely wrong)

@joshuaho96 I did go looking for the FPCM (after googling) but it's an old drift car so I think that has been bypassed already, the fuel pump is wired directly to the battery.

@MBS206 OK I'll double check vacuum lines. I'm just looking at the FPR gauge, shows around 40PSI while priming and idle, until instant drop to 0, not even a slow drop, like instant.

 

MBS206 Grand Master

MBS206

Posted
Posted
1 hour ago, Tim32 said:

Hey guys, thanks for the replies! (We are noobs so sorry if some of this seems obvious or is completely wrong)

@joshuaho96 I did go looking for the FPCM (after googling) but it's an old drift car so I think that has been bypassed already, the fuel pump is wired directly to the battery.

@MBS206 OK I'll double check vacuum lines. I'm just looking at the FPR gauge, shows around 40PSI while priming and idle, until instant drop to 0, not even a slow drop, like instant.

 

How is the Fuel pressure gauge connected, show photos, what's it referencing etc.

 

Get photos of how the fuel pump is wired.

I'm assuming there's a relay triggering it, if so, measure what the signal wires are doing. From memory the ECU pulls to ground, so find the coil wire that goes to the ECU and measure resistance to ground.

 

If it's an old drift car, what ECU is in it?

TurboTapin Experienced

TurboTapin

Posted
Posted
9 minutes ago, Tim32 said:

Here's some pics, ECU is stock. thanks again.

IMG_3128.jpeg

IMG_3127.jpeg

That wiring looks like it was done by a 12 year old with a methamphetamine addiction. Start by redoing that disaster. What you're describing has nothing to do with your FPR vac source. 

  • Haha 2
MBS206 Grand Master

MBS206

Posted
Posted

I gotta agree that FP wiring looks, interesting.

And questionable.

 

I'd be doing some probing to see what circuit is shutting off.

It actually sounds like FPCM wiring is partly in use.

Priming, starting are all at full power from memory, then a few seconds later drops to half strength, and it looks like that signal isn't getting to your FP, as a hypothesis that is.

 

Needs more probing on a multimeter being done.

joshuaho96 Veteran

joshuaho96

Posted
Posted
1 hour ago, MBS206 said:

I gotta agree that FP wiring looks, interesting.

And questionable.

 

I'd be doing some probing to see what circuit is shutting off.

It actually sounds like FPCM wiring is partly in use.

Priming, starting are all at full power from memory, then a few seconds later drops to half strength, and it looks like that signal isn't getting to your FP, as a hypothesis that is.

 

Needs more probing on a multimeter being done.

This is exactly what I was thinking, I just wasn't expecting whatever that hackjob was. Skyline owners never disappoint.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • sonicii
      Who has a Infiniti Q60, Q50 (V37)?

      By sonicii · Posted

      Yep, it was only an option on the Q50 Hybrid.  Same in Japan as far as I know. And doesn't use a centre diff like the Suby's do, so not the same as the WRX.  But it also isn't a reactive AWD like other Nissan AWD vehicles are, eg. Murano/Xtrail/etc.
    • MBS206
      NC MX5

      By MBS206 · Posted

      You should have got a Maine Coone then. Only thing is they're big. But so cool, and just like a dog. Or, just get yourself a high performance dog. That'll teach you for wanting Parkour indoors 😛
    • MBS206
      UniClutch

      By MBS206 · Posted

      Are you thinking of Bens R32? I don't remember if his went through the bonnet itself, but it went through the chassis rail. Brad (RISKIN) bought it, and turned it into a track car. It's funny how anti people are of Jim Berry now. I remember when I pulled mine out (during an engine change) and inspected it and found it cracking badly. At that point in time so many people were even on SAU, were so pro Jim Berry, and that was after Bens GTR exploded his quite publically.
    • The Bogan
      NC MX5

      By The Bogan · Posted

      That's one of the reasons I got that breed, they look weird, the other reasons are they small, they are very vocal, and run around like they are on crack, I didn't want a breed that just sits around, these two are like kids on red cordial  My daughter has one, and it's a laugh riot, constantly doing Parkour around the house, sits on her shoulder, plays catch, and constantly runs around the house taking turns chasing the dog around, her Bermese though, just lays around with constant bitch face, and just looks on in utter disgust at the cat and dog playing together 
    • Murray_Calavera
      UniClutch

      By Murray_Calavera · Posted

      I'm getting PTSD flashbacks seeing that name again.  With my turbo swift, I got 1,500km of street use on a Jim Berry clutch before it exploded and took out my input shaft with it. 
×
×
  • Create New...