Jump to content
SAU Community

Recommended Posts

For the love of everything that is holy, how do you guys manage to get this thing off?????!!!!

I wanted to change my spark plugs today. Got everything, watched all the tutorials I could find, and read all the forums in here on steps. And then I got blocked on this coilpack cover!! Talk about feeling defeated πŸ˜•

Most guides just say it should come off after a bit of jiggling, but nothing I did worked and I didn't find any video tutorials where the person actually had to deal with the cover - it wasn't even there in most cases.

I took off everything above it. The wires towards the firewall had brackets connected to them so I unscrewed it from the cover so I could move them around.Β 

image.thumb.jpeg.90a0e4b12d87d6926684a1b1356a4a2b.jpeg

Β 

I took off the hose circled below and still nothing.

Frame1220.thumb.png.55c15d9a0e09706afe3cb716ee5e4832.png

Β 

I thought maybe I could get more leverage by loosening the bracket that holds the engine cover, but that didn't make a difference either. I was sliding the cover back towards the firewall to lift it up, then pulling the firewall side towards the passenger side to try get it off, but it kept hitting the piece highlighted in blue.

image.thumb.png.bfe06c60dfcb059d04f86142c2a713cb.png

I don't think this car has ever had any OEM parts changed (the black rubber connectors really need to be changed, they are rock hard), so even the wires near the firewall are iffy and I'm worried about breaking them - I've already got one OEM clamp with a wonky screw that doesn't do anything!Β 

Would anyone have a link to any tutorial that shows how to take this cover off? I just put everything back to how it was but I'd like to get the spark plugs changed for peace of mind. Most videos I found are for removing the cover in an RB26. The strut bar is the only thing I did not take off but the cover is not even reaching that to be the cause for all this. Same story with the rubber piece for the throttle body - did no difference.

Β 

I did have a peek inside the cover and saw that the coilpacks look nice and clean, and even got a cable tie around them and the plug (except for one piece of corrugated wire protection tube that seems to have been living there for while 😑). But I really want to see the state of the spark plugs and get the damn things changed! 

Appreciate any help you can give me. πŸ™πŸΎπŸ™πŸΎπŸ™πŸΎπŸ™πŸΎ

It is actually a bit dicky to slide out. I'm assuming you removed all the bolts on it :p

It does require a certain angle to go in/come out. When you line it up right you will see it will just slide out. You may need to take off the coupler for the throttle body to get the clearance. You may need to remove the engine cover's bracket as well.

There's a fair bit of angles and a bit of twisting to get it to slide out which I assume is the issue here.

On 15/08/2024 at 8:00 AM, GTSBoy said:

I think the fitting into the exhaust cam cover that takes the 2 breather hoses just pushes into the cam cover. Just....rotate it or pull it out?

Thanks @GTSBoyΒ - I will see if I can rotate it. The problem is that the cover hits the circular pillar that holds the 2 valves - so unless I pull the piece out, it might still hit it.

Β 

@Kinkstaah Yes I did take all the bolts off 🀣
When I first saw this cover, I thought to myself "Oh I have not seen this in any videos, but how smart!! It keeps any junk from going into the coilpacks"
Pretty soon, I reverted my thought πŸ˜…

Worst case scenario, I'll take it down to a mechanic to have the spark plugs changed for me. But I will ask them to keep the old spark plugs around so I can ake some picsΒ 

It absolutely, 100% can come out. Every time I took it out and put it back in in the past I had to re-familiarize myself with how it came out.

When it's the right angle, it actually comes outΒ very easily.

On 15/08/2024 at 10:56 AM, Murray_Calavera said:

It takes about 5 seconds to twist and remove that breather.

Thanks for that! That is good to hear. I didn't want to try pull something out that should not be pulled out from the block 🀣

On 15/08/2024 at 4:33 PM, GTSBoy said:

I already told you it was a push in.

ohhh duuh! My bad @GTSBoyΒ I read the part about turning it and completely blanked out on the "Pull it out" part πŸ™„

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • The rain is the best time to push to the edge of the grip limit. Water lubrication reduces the consumption of rubber without reducing the fun. I take pleasure in driving around the outside of numpties in Audis, WRXs, BRZs, etc, because they get all worried in the wet. They warm up faster than the engine oil does.
    • When they're dead cold, and in the wet, they're not very fun. RE003 are alright, they do harden very quickly and turn into literally $50 Pace tyres.
    • Yeah, I thought that Reedy's video was quite good because he compared old and new (as in, well used and quite new) AD09s, with what is generally considered to be the fast Yokohama in this category (ie, sporty road/track tyres) and a tyre that people might be able to use to extend the comparo out into the space of more expensive European tyres, being the Cup 2. No-one would ever agree that the Cup 2 is a poor tyre - many would suggest that it is close to the very top of the category. And, for them all to come out so close to each other, and for the cheaper tyre in the test to do so well against the others, in some cases being even faster, shows that (good, non-linglong) tyres are reaching a plateau in terms of how good they can get, and they're all sitting on that same plateau. Anyway, on the AD08R, AD09, RS4 that I've had on the car in recent years, I've never had a problem in the cold and wet. SA gets down to 0-10Β°C in winter. Not so often, but it was only 4Β°C when I got in the car this morning. Once the tyres are warm (ie, after about 2km), you can start to lay into them. I've never aquaplaned or suffered serious off-corner understeer or anything like that in the wet, that I would not have expected to happen with a more normal tyre. I had some RE003s, and they were shit in the dry, shit in the wet, shit everywhere. I would rate the RS4 and AD0x as being more trustworthy in the wet, once the rubber is warm. Bridgestone should be ashamed of the RE003.
    • This is why I gave the disclaimer about how I drive in the wet which I feel is pretty important. I have heard people think RS4's are horrible in the rain, but I have this feeling they must be driving (or attempting to drive) anywhere close to the grip limit. I legitimately drive at the speed limit/below speed the limit 100% of the time in the rain. More than happy to just commute along at 50kmh behind a train of cars in 5th gear etc. I do agree with you with regards to the temp and the 'quality' of the tyre Dose. Most UHP tyres aren't even up to temperature on the road anyway, even when going mad initial D canyon carving. It would be interesting to see a not-up-to-temp UHP tyre compared against a mere... normal...HP tyre at these temperatures. I don't think you're (or me in this case) is actually picking up grip with an RS4/AD09 on the road relative to something like a RE003 because the RS4/AD09 is not up to temp and the RE003 is closer to it's optimal operating window.
    • Either the bearing has been installed backwards OR the gearbox input shaft bearing is loosey goosey. Β  When in doubt, just put in a Samsonas in.
Γ—
Γ—
  • Create New...