Jump to content
SAU Community

Recommended Posts

The videos on Youtube look terrible, they don't seem to do much to a fire at all.

I wanted to replace the extinguisher in my car with something smaller but I might hang off this move until there's good evidence.

I was looking for one for the MX5, but it looks like I could get 3 or 4 1kg Firebox extinguishers for the price of one Firestryker

From my experience at work, the yearly service is just looking for external damage and the pressure gauge,  if all is well they stamp the tag

For training at work we have actually used old extinguishers that have passed our, "replace after 10 years" requirement, and have never had a issue with them as long as they are still showing green on the gauge

The only really benefit I see is the lack of mess the Firestryker leaves, whereas dry powder is a corrosive devil and it gets everywhere 

  • Like 1
  • 3 weeks later...
On 10/23/2024 at 4:49 PM, The Bogan said:

I was looking for one for the MX5, but it looks like I could get 3 or 4 1kg Firebox extinguishers for the price of one Firestryker

From my experience at work, the yearly service is just looking for external damage and the pressure gauge,  if all is well they stamp the tag

For training at work we have actually used old extinguishers that have passed our, "replace after 10 years" requirement, and have never had a issue with them as long as they are still showing green on the gauge

The only really benefit I see is the lack of mess the Firestryker leaves, whereas dry powder is a corrosive devil and it gets everywhere 

From what I've seen and experienced first hand with those powder extinguishers, they're good to use to break a window and escape the car, and half the time then do f**k all to stop a fire. You just need much more than 1KG worth of powder. Not to mention, half the time it's an engine bay fire, and you can't easily, and do not want to completely open the bonnet, so you're left pretending to be an American Infantry... Spray and Pray baby!

 

And then 100% that shit is really destructive afterwards!

 

Realistically, those little ones at a race track might help you keep the fire from growing and give the fire marshal / truck a chance to actually get to you with their multiple large bottles.

 

For a road car, these days, prepare to deboard as quickly as humanly possible, and move to safety. Allow insurance to fix replace it (unless it's like a rare classic etc, then do nearly everything possible to save it!)

Keep the little extinguisher with you to help protect other things around you from burning while you stand there singing "How can we sleep while our beds are burning?"

 

Secondly, powder extinguishers I freaking hate for indoor use, (this isn't really relevant to a car) as you will get a powder fog around you, and it can be disorientating.

 

When I did fire training when at BlueScope Steel, they have (had?) their own fire brigade on site. We did all the training, and at the end we were told, "If it's an indoor fire, and you need to use a powder extinguisher, we as the fire brigade would rather you just exit the building, you're more likely to get lost in the smoke and powder fog than do much help, so just GTFO"

And pretty much that was what they said for most other fires too, grab extinguisher, if it's much more than paper in a bin fire, use extinguisher to get you and others out of the building to safety...

 

Part of me wishes when my Skyline caught alight many moons ago, I let insurance sort it out, instead of putting the fire out... :/ part of me now says "But I've saved a classic before it was a classic!"

  • Like 2

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Agree with Rob. I recently did mine and replacing with a brand new unit made the most sense compared with rebuilding my existing gearbox.
    • Are you suggesting that the kit did a cheap and nasty job of just jamming the wheel in between other things and caused the misalignment? I mean, we normally do this with an integrated crank trigger wheel, not something bodged on. It's not 1995 any more.
    • I mean, given the number of BMWs you own their tolerance for improper torque is rather low. The number of torque + angle spec bolts and non-reusable bolts in one is nuts.
    • Atmospheric vent requires something that doesn't use a MAF for load. You would need a standalone ECU for that.
    • Hey all,   I’ve got an RB25 with a trigger kit that includes a crank wheel, and I’ve hit a wall trying to sort a timing belt tracking issue. The belt either rides right on the edge of the cam/crank pulleys or walks slightly forward once the engine starts. It tracks okay-ish for a moment, then creeps right to the edge—and honestly, it’s stressing me out.   I’ve spent hours removing and reinstalling the belt, double-checking everything:   Tensioner setup is good, checked multiple times Idler pulley and washers are all in the correct places Followed the RB25 timing procedure step-by-step     The only thing I changed was the rear crank washer—I swapped the OEM one for a Neato version, and it made things worse. The belt now sits even more forward than before. I’m beginning to think the crank trigger wheel itself (from the trigger kit) is the issue—poor design or slightly off dimensions.   What’s strange is that with the previous belt setup, it actually ran fine for a couple of years—around 4,000 to 5,000 miles, even with hard driving and high RPMs. But even then, the belt was always riding right on the edge, and I know that’s not ideal or safe long term.   At this point, I’m debating whether to:   Machine a few mm off the crank trigger wheel to bring it back in line, or Replace it entirely with a better-designed unit     Only thing is, I already have the Cherry Hall sensors, bracket, etc.—I just want to replace the wheel only, not the entire kit. Anyone know a brand or supplier that sells just the crank trigger wheel on its own?   Would really appreciate any feedback—especially from anyone who’s run into this exact issue and found a reliable fix.   Thanks in advance.
×
×
  • Create New...