Jump to content
SAU Community

Recommended Posts

Hello everyone,

I am from Malta and have recently bought myself a fully stock 1992 Nissan Skyline GTS. It has the RB20DE engine and thus is NA.
Unfortunately, not a lot of information can be found online related to the GTS, unlike the information for GTS-T and GTR variants.

Apart of the Skyline, I also got a 1984 Porsche 924 2.0l NA and a 2002 Renault Clio 1.5DCi for everyday use.

Excited to be apart of the community and perhaps get better information on cars such as the GTS.

  • Like 3
Link to comment
https://www.sau.com.au/forums/topic/486045-new-owner-of-a-skyline-r32-gts/
Share on other sites

Welcome.

1 hour ago, GabsReDeal said:

Unfortunately, not a lot of information can be found online related to the GTS, unlike the information for GTS-T and GTR variants.

This is not really true. We have a whole forum here just for the NA shitboxen. And they are not very different from the turbo shitboxen. Just weaker brakes and gearboxes, and no LSD, for the most part.

16 minutes ago, GTSBoy said:

Welcome.

This is not really true. We have a whole forum here just for the NA shitboxen. And they are not very different from the turbo shitboxen. Just weaker brakes and gearboxes, and no LSD, for the most part.

And half of them have been converted to turbos.

  • Haha 2
1 hour ago, Ozdavroz said:

Welcome Gabriel.

At least your car has a glorious RB and not the shitty CA18. As MBS206 mentioned all the good bits can be added later.

Two doors or four?

It is a two door. It is black and also still has the OEM wheels and stereo.

Exact model would be KR_R32RGFEL_SS

According to GTR-Registry.com is a 2 Door Coupe; RB20DE; 2WD no HICAS; MT.F5; (11L) Projector Headlamps and Fog Lights; (12_) Electronic Active Full Auto Air Con (Climate Control); (13-14SS) V Selection -- Which seems to be accurate description of my variant.

Will try to upload a few pictures soon.

The OEM wheels look like the below image. Image is taken from the goo-net-exchange website.spacer.png

 

5 hours ago, PranK said:

These look like S13 wheels. 

And Welcome! 

image.png

Exactly, when searching online they were a lot more common on S13s, but have seen quite a few of Skyline GTSs with them as well.

Yeah everyone always seems to refer to them as S13 wheels however they came on R32 Skyline, A31 Cefiro, C33 Laurel etc., and also came polished diamond cut or painted depending on the model.

Congrats on your GTS purchase! I'd personally leave it NA. :)

  • Like 1

Wow! It looks like those photos were taken in 1989. I don't think I've ever seen an R32 so high off the ground before. Straight out of the brochure!

There's all sort of typical mods you could do - wheels, lowering, body kit, etc etc..... but I'd be tempted to leave it like that.

  • Like 1

Thanks for the nice comments, I really appreciate it. 

6 hours ago, Ozdavroz said:

Very clean car, are you keeping it stock or planning any mods?

Regarding mods, I am planning of keeping it mostly stock. The only possible future mods I am thinking of are new wheels, perhaps sports shocks or coilovers, and was about to do a cat delete on Monday (However, I am unsure about this and I am getting cold feet). Despite this modifications, I'd still keep all the original wheels/parts.

8 hours ago, GabsReDeal said:

and was about to do a cat delete on Monday

Don't bother. The poor little RB20 doesn't make enough gas flow to challenge the flow capabilities of even the littlest cat, and you won't make any extra power, and all you'll do it soot up your rear bumper.

Plus....is Malta not runing under Euro regs?

  • Like 2
22 minutes ago, GTSBoy said:

Don't bother. The poor little RB20 doesn't make enough gas flow to challenge the flow capabilities of even the littlest cat, and you won't make any extra power, and all you'll do it soot up your rear bumper.

Plus....is Malta not runing under Euro regs?

Thanks for your insight, it being basically useless will impact my decision for sure. I thought it may help the engine breath better I guess. But then again, I have also been told that tuning an RB20DE is also not worth it.

Exactly, we follow EU Regulations. There is a bit more leeway on older vehicles. My Porsche 924 came without a cat from factory and managed to pass, they still mentioned that I have quite high emissions on it though.

  • Like 1

Welcome. 

That is a very nice looking vehicle.  Please  whatever mods you do, keep the original parts and make sure it can be put back.

As others have mentioned, cat delete wont help with power. All it will probably do is hurt emissions. 

  • Like 3

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • You can use your VIN to look up the factory part number somewhere like amayama, and then look to order new if necessary. https://www.amayama.com/en/genuine-catalogs/nissan Depending on price you might want to rebuild instead. @GTSBoy I had an interesting insight into US market parts when the Titan rear calipers were sticking. New calipers were dirt cheap, about 20% more than a rebuild kit....they are just considered throw away maintenance items
    • Funny, but really not funny. Thank god (most) f the world has moved on since then
    • Lots of votes for driving onto a plank first; that is the quickest way I've found, 25mm is enough for my case but that will vary by car It also depends where you are going for. On the 32 I can get to the rear diff with my floor jack if I do that end first, and get it up on stands. Then I lift the front from either front tow hook as high as needed, also onto stands. Sometimes I need a small lift on the other tow hook to get it level enough If I do the front first I can't get to the rear diff because of the angle of the car Other options are getting to the front mount of the rear subframe from in front of the wheel (if only lifting one side, or just do both which is a bit of a pain compared to one lift from the diff), or also the gearbox cross member mount on the driver's side if you are  just trying to lift the driver's side. I This is the jack I use; it says 75mm clearance but of course that is only on the lower section so if you have to reach too far in like the diff you still get stuck. https://www.snapon-bluepoint.com.sg/category/Floor-Jacks/product/Floor-Jack,-2-Ton-Low-Profile
    • On the bright side, the weather will turn much nicer for working outside shortly....sounds like you might need to start on a neighbour's garden next
    • Ok so i will NEED to have this sensor anyway even with Nistune (or standalone ECU) https://justjap.com/products/genuine-nissan-boost-pressure-sensor-evap-control-system-fits-nissan-r34-skyline-c34-nm35-stagea-pnt30-x-trail-rb25det-vq25det-sr20vet?currency=AUD&srsltid=AfmBOoqfxX48bW9bEwH62orcNhtBfp7ekAL0C9Ca89ySFGUiBzXfXeze Is this the correct one? And this is only thing i need? No other "things" connected to the sensor or something? I do have the wiring.
×
×
  • Create New...