Jump to content
SAU Community

Recommended Posts

Hey all, not sure how active SAU is anymore but will ask away anyways.

Just wanted to get some experience on the 2008 model GTR CBA model.  I've hit that age in my life (43) where I'm like fk it time to get my dream (midlife crisis) car.

Looking at importing one in and seeing if these can be reliable if the main flaws are fixed up.

Plan is to keep money aside to do the following straight off the bat to future proof it:

* install a stage 1 rebuilt trans with all new bits and pieces. 
* install a new Bellhousing from the later model GTRs. Or potentially an upgraded stronger version like MAD or ATR.

Besides the above two things and typical maintenance items anything else you'd recommend doing.

 

Been speaking to a few people and the engine on these are very reliable apparently. But keen on the view of the community here.

Hoping to find a nice grade 4.5 with low mileage in Grey. I'd go black but swirls too easy.


Look forward to your responses and feedback.

Cheers

 

 

Link to comment
https://www.sau.com.au/forums/topic/486101-questions-on-potential-new-purchase/
Share on other sites

40 minutes ago, MBS206 said:

How do our rules work in Aus with importing one, since they were sold locally here?

You can bring them in from the first model until Nissan Oz sold them, and then again since Nissan Oz stopped selling them (I think, on the second)

  • Like 1
35 minutes ago, Duncan said:

You can bring them in from the first model until Nissan Oz sold them, and then again since Nissan Oz stopped selling them (I think, on the second)

Ahhh! My silly brain was thinking Nissan started selling them straight away, but they waited w or three years didn't they?

 

Maybe Duncan should build an R35 race car over the V37... There's a cheap yellow one on car sales Duncan, would only need your splash of purple added...

Edited by MBS206
On 09/02/2025 at 11:27 AM, GTSBoy said:

The usual gamble is the usual gamble. Hawkins bought one last year. Very nice, found in Japan via the usual mates.

Blew it up just driving it around. It's just roulette.

Yeah saw that video on YouTube. But he got a R grade (repaired) high mileage model and proudly advertised the fact it was super cheap and no doubt with issues.

I wouldn't be going the cheap and nasty route.

  • 5 months later...
9 hours ago, TurboTapin said:

I'm a strong believer that old sports cars should be reserved as weekend cars

Bah. I daily mine. ~60km per work day, 10-12 thousand km per year. What's the point of having a dirty old Datto and leaving it in the shed. It needs to be driven and enjoyed while the govco allows us to do so. It will only be a few years before we're forbidden to even start up internal combustion engines.

Am I correct in assuming that the R35's are getting the classic skyline haircut off the odometer? 

Quick search on carsales, there are 33 08 and 09 GTR's for sale, only 2 of them have more then 100,000km's on them (116,075 and 110,000 respectively). 

And somehow there are about 25 for sale with around 60,000kms? Looks like the classic skyline haircut to me =/

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • It says 300ZX, does that make it an Aus delivered car? Funny how back in the day I just couldn't care less about Z32's and these days I am just in love with them. Back when Nissan was into pushing the envelope. 🤣
    • Hi guys, just after some guidance with an R34 sunroof that has stopped working correctly. It still opens and closes perfectly fine, but it no longer tilts/vents up or down. As a result, the rear of the glass now sags a bit as it drops down slightly in order to retract into the roof, but now it can't pop upwards into a flush position. I’ve probed the pins on the back of the switch connector with a multimeter and it seems like both switches (for open/close and tilt/vent) still work correctly. Any ideas on what it could be, or where I should even start in terms of diagnosing? I'm sure someone's had this issue before but I haven't been able to find anything online relating to this specific issue, most of the issues are with the seals leaking or the motor failing entirely. Thanks in advance!
    • Do you have some data like fuel pressure? It's really hard to say if you're still fighting a fuel system issue at this point. Could be something weird like the FPCM dipping out.
    • Yeah in that case, pulling the dent out. Event a very slight dent can create a lot of work filler-wise and there is a strong chance the panel won't be the factory shape when you are done (as the dent will result in a new high point created somewhere, then everything is brought up to that new high point... but the panel shouldn't be that high if that makes sense).  So you've filled and primed the panel and it is flat, why would you go back and remove the primer and add more filler? 
    • Something else I have been faffing with while the car was off the road is making the AC work. Assuming the car isn't at a thermal limit the idea of having AC while waiting in line to go on track sounds delightful. I have actually been lugging around the weight of the entire system since 2018 when the RB25NEO went in without it working at all.  The main reason was in the first few events before I got around to re-gassing it the rubber hose that runs under the manifold had the factory heat wrap/sleeve fail resulting in this: ~2 years ago I purchased a complete used R32 AC line set but when I finally went to install it the line i needed was different where the expansion section is I found a local place that was able to replace the rubber section and re-crimp. They also added some modern heat sleeve to the hose Tight fit but fingers crossed this is the last physical piece of the puzzle needed
×
×
  • Create New...