Jump to content
SAU Community

Recommended Posts

Yes many wonder and think we are cheating, and well yes we are. I thought to disclose some of our secrets of our zed tt race car and why it goes so well. Yes Nissan make some things universal to different family of cars and engines as we have found over the years of checking. My zed actually has quite a few GTS-T and GTR bits including.

Nismo GTR bushes in diff and control arms. Nismo don't make much for zeds adn don't even know that some GTR bits fit zeds as not listed in their catalogue.

R32 GTR Cusco upper rear adjustable control arms. A bit heavy though soon to go chromolly custom.

Modified NISMO R200 R32 GTR diff centre with R32 GTS-4 crown and pinion 4.375 ratio. About 20 kilos lighter, much better ratio than the heavy zed 3.7 which is also a slushy viscous coupling.

Tomei GTR solid lifters, valve springs, retainers and shims. converted from hydraulic lifters similar to RB20 and 25. Solid lifters seat better at higher rpm and accommodate custom cams.

Turbo's are similar to N1 but are actually new 200SX S15 ball bearing.

Soon to have N1 silicon crank and cam seals, yes VG and RB same here and N1 stand more punishment with heat I guess and are orange in colour.

Did have R32 GTR water pump pulley with holes drilled to suit 300ZX 4 stud viscous fan. Being larger but same offset and belt size, this slowed the water pump down so it did not cavitate as much at high revs. I now use electric water pump and thermo fan.

Motor going back in next week with R33 GTS-T lighter alloy power steering pump rather than heavy zed NA cast iron one I have been using. Yes thanks to Nissan bolts straight up other than high pressure hose so getting this moded to suit.

Nismo R33 GTS-T gear box mount. New alloy light weight body rather than steel factory one, and is also stiffer for better throttle response and less energy loss.

Nismo 555cc RB20 top feed injectors with custom fuel rail that sits above factory plenum instead of below the plenum. Instead of factory side feed. Also was able to use custom alloy high flow fuel rail, and open up engine for better cooling as it keeps the fuel rail out and away from hot engine block and heads. Plus as a bonus the injectors were incorrectly ordered by a customer a few years back and I thought may as well use them.

R33 GTR accelerator peddle which has a bulge at bottom for heal toe. No GTS-T's don't have and YES GTR peddle also goes straight on and only about $15 from memory.

I am sure this is not the end of it and it does seem to keep happening.

Lots of other parts fit such as R32 or R33 GTR brakes but went 6 piston.

Zed and R32 GTR have same gear box by they way. As in the middle bit with the gears that is. Lots of other bits I won't go into here. I have only listed what is better for zed.

Not sure what Zed bits a GTR would want other than AFM and motor.

OK who's first Skylines Rule etc etc.

Link to comment
https://www.sau.com.au/forums/topic/49063-zedtt-race-car-with-skyline-bits/
Share on other sites

Bottom end is built and the rest of the motor is going back together over next week, then she goes in. Did a few mods such as custom cams with 10 degrees more lift, extrusion honed the factory exhaust manifolds and did some match porting and a few other things. It has a big SKYLINESAUSTRALIA sticker on the back maybe a GTR sticker on the front hey?

Duncan how is your GTR going and are you coming to our track day for the big GTR v ZED challenge?

Ummmm I think my Skyline has something from a Zed... Ummmm Ummmm , let me think.

Oh Yeah - I remember.........

The Nissan Badge.

JP I don't know why you go to all the trouble of making your VG more like an RB - just put the RB26 DETT in it and be done with it mate. Will save you heaps of the R&D you are doing that prooves RBs are superior to VGs and VQs.

:cheers: he he ;)

Well there have been a few conversions to RB26 into Zeds which is backwards wondering if anyone would go the other way. Big prob is the 4 wd set up.

The new generation ALLOY block VQ30 is the way to go which many of the Jap GTR GT500 Circuit cars are using.

  Duncan said:
pfft don't worry about the small VQ30 go straight for the big block VQ35 ;)

They are expensive and hard to get but looking into stroking the VQ30 to VQ35. Getting info from Nissan re this, probably same block just different sleave, pistons and rods. We will be getting ARGO rods anyway and forged pistons so no biggy there. 100 kilos lighter with more HP and torque and maybe two Disco Potatoes and wacko probably 450rwkw with out too much lag. The new Nissan range is strong, nicley balanced and not only much lighter but much lighter rotating mass. We pulled appart a VQ30 NA that we are using as a jig and as a test we weighed the scond hand pistons and rods together, not cleaned so had some carbon and oil, the maximum variations was .5 of a gram. To give you an idea this is one small posted note. That is VERY good. A workshop near us was rebuilding a 350 Chev V8 boat anchor Commodore motor and just pistons alone were 8 grams difference and they were new.

  • 3 weeks later...

Also has R34 GTR rims on it thanks to Steve at Just Jap which we used at Drift Nationals. They realy suit the car and the GTR badge on the centre caps look the part. We actually used a VQ30 all alloy power steering pump on it. Not sure if I mentioned but it also has R32 GTR Nismo diff mounting bushes.

I imagine you have passed a casual eye over this animal...Autech Tsukada Z32, basically VQ35 with HKS 3037. I like the idea of twin GT28s better.

Hope UAS go thru with it, when i win Powerball ill pay for the container over to Japan with some Aussie built cars, could even perhaps surprise a few ppl

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • My experience with Rising Sun Exports Before agreeing to the sale I tried to do as much research as I could (obviously), his Facebook reviews are 98% and he goes Live at least once or twice a week. I contacted 2 people in the UK who had used him for their imports, both had positive feedback. His explanation and talk through of the import process was thorough, answering any query no matter how stupid it was. It felt as soon as the money was sent, communication dropped off. I asked for shipping updates every 2 weeks or so, not wanting to pester him, he never had any updates. I wasn't informed the car had been dropped off at the port, I only found out by his Facebook story. I asked for the photos taken at the port, knowing he would need some for insurance purposes. I received a few 5 second clips and that's it. When asked again, he said his staff had them. Weeks later I asked again, he tells me he doesn't have any, but does have 50 photos from the original advert. I never received them. I eventually got the documents sent via WhatsApp after I mentioned the port was requesting them. I purchased a CarVX report, to find out the vehicle is a Grade R with recorded accident damage, first recorded in 2017 when it was first auctioned. He never told me the grade, then again I didn't ask. His response was "Grade R means nothing, it wasn't chassis damage". Still, I would have liked to have been informed about it. Jon prides himself on being open and honest when it comes to inspecting cars, it's his main job doing so at the auctions for customers. When the vehicle arrived in the UK I noticed a few little cosmetic issues. It's a 21 year old car so it wasn't going to be mint condition. The side skirts are cracked on each corner and the sealant is failing. The front grill on the bonnet/hood isn't secured very well, mounting studs are missing. Both minor things, but again, it would have been nice to be told. During a Facebook Live walk around video of the vehicle, he mentioned it has a front Whiteline anti roll bar/sway bar. While on the inspection ramp, I noticed the stock item has been installed. When first questioned, his response was "the ARB? Switched? Since when, it never had them". Since sending video and photo evidence I've not received a response. I'm probably being over critical of the overall condition of an old car, but all I wanted was honesty (which he claims to have). I'm aware I wasn't his only customer, he's busy doing XYZ but other reviews praise him for great communication with regular updates and photos, I felt I didn't receive the same treatment. 
    • I was able to get some underside photos while the car was on the ramp The suspension is all Altezza/IS200/IS300 so getting part's will hopefully be less of a headache
    • Welcome to my 2004 Toyota Mark ii IR-V Fortuna (series 2) With a 1JZ-GTE powerplant under the bonnet (hood) it'll give me plenty of scope for power upgrades. For those who aren't familiar with imports, the 1JZ-GTE is a 2.5L 6 cylinder VVTi engine with a single turbocharger. This has the factory R154 5 speed gearbox, along with a aftermarket 2 way LSD differential (brand unknown). Under the arches are a set of CST Zero 1 alloys, 18x9 +30 225/40 up front and 18x9.5 +15 265/35 on the rear. The car was quite low in Japan and there's evidence of the wheels catching the rolled arches/fenders. The tyre's aren't great so I'm in two minds whether to replace both or just the tyres and put up with the wider wheels on the rear. The car still uses stock brakes with the addition of some braided hoses. The exterior is stock with the exception of a BN Sports front bumper and a replacement Fortuna grill  Moving to the interior, the steering wheel has been replaced with a dished MOMO steering wheel (which will get swapped for my Momo Tuner for the time being) Defi Link Gauges are mounted above the climate controls and on the A pillar, the Oil Temp,Oil Pressure,Water Temp and Boost gauges should help with spirited and track driving  The stock seats have been replaced with some retrimmed Recaro bucket seats. Being a larger build these are a little snug, unfortunately the orange isn't for me so I'll look into replacing these down the line. Other modifications include a twin plate clutch, Blitz intercooler, Evolve alloy radiator, a stainless exhaust with decat, HKS EVC-S boost controller and coil overs
    • Apologies for the long read My R34 GTT was up for sale at the beginning of spring due to a few repairs creeping up. The strut tops needed replacing, roof and bonnet (hood) painting (yay for 3 stage pearl) and the underside stripped and treated. I sold the car which allowed me to be in a much better place financially. Leading up to the sale I was already thinking about the replacement. In an ideal world it needed to be a good all-rounder. Something I can mess around with, modify, do track days, do the school run, go on long drives etc.  Options included but not limited to... Laurel C35, Evo 8/9, Civic FD2, Impreza Hawkeye, Aristo and even an Audi S4 Avant (I've already got the Mazda 6 wagon). But there was always one car at the top of the list The Toyota Mark ii JZX110 I found an advert on a Facebook group for an example in Japan, from a seller called Jon at Rising Sun Exports. A few messages back and forth and Jon calls me from Yokohama one morning (or afternoon in his case). He briefly explained the import process, the costs involved and a repeat of the advert. After much deliberation, the price was agreed and the sale was locked in. I've never imported a vehicle so I jumped into the unknown head first. The money transfer was completed through wise.com (fees apply), very easy to use and the money was with him within a day or two.  The car suspension was raised for the vessel and the car dropped off at the port. It was 7 weeks later when the bill of lading was received and the freight invoice sent to me, followed by the export certificate a couple of days after (both digital copies) In the mean time the port had been in contact. I needed an agent to deal with the NOVA (notification of vehicle arrival) along with the tax/duty invoice, this was £75.00. The port also had a fee of £100, I'm guessing to cover the cost of the 10 day 'free storage' and for moving the car off the boat etc. They need a copy of the vehicle invoice, freight invoice and export certificate to allow the vehicle to pass through customs. The vessel arrived on Tuesday 5th August, the tax/duty invoice was generated and sent over. This is generally tax 20% and duty 10% of the vehicle value. Although the invoice came in at a higher amount than I had calculated. Once HMRC had received the payment the vehicle could be released from customs. I thought once the tax/duty was paid you could collect at any point, that's not the case. Your agent will need to book a collection slot, I requested Thursday 7th which was accepted, with a 9:00am slot allocated. It was a 5:00am start from Norfolk heading to Southampton. We eventually found the compound, upon presenting the bill of lading and some ID they released the car (they drove it out of the compound to the front ready for us to load up). The email from the port stated each slot had a 10 minute window, which seemed abit farfetched but the staff said it's not a strict rule. We were there for approx. 30-40 mins in total. A week prior to collecting I contacted my garage and explained the situation, I was able to get an inspection slot that afternoon. For the registration, DVLA require the car to be insured, for this I used a company called Adrian Flux who can insure the vehicle using the VIN number. 
    • Hey guys, looking for these side skirts if anyone can help me out. 
×
×
  • Create New...