Jump to content
SAU Community

Recommended Posts

Is it safe to take the redline up to 7500rpm or so? With stock internals, and a PowerFC. I've got an adjustable exhaust cam gear so that should help with any breathing problems, but I'm also worried about affecting the longevity of the engine.

Link to comment
https://www.sau.com.au/forums/topic/49107-increasing-redline-on-rb25/
Share on other sites

  • Replies 156
  • Created
  • Last Reply

Top Posters In This Topic

Long term = completes a track session

Standard internals = un-opened motor

:D

:cheers: always the realist ;)

I took mine to 7500rpm no drams for over 12 months.

Motor died - but that wasnt due to revs, just a few too many psi snuck in one night and caused it to ping.

So 7500 all the way.

Although, i found with stock cams, the car didnt have any go after about 7300 at that was still pushing it.

Also due to many other factors aswell im sure, like ECU and all sorts of other things

There is no point at all to increasing the redline, You will lose so much power after 6500RPM that its not even worth it. It may seem like its still pulling but on the dyno it shows that the HP drops like hell.

Although, i found with stock cams, the car didnt have any go after about 7300 at that was still pushing it.  

Also due to many other factors aswell im sure, like ECU and all sorts of other things

I'm only considering it because I've got an exhaust cam wheel, and will be running 15 psi after the tune. I used to run 15psi with the factory ECU, but the PowerFC at the same boost maxes out my injectors and AFM. So I'm running at 11psi until I get it tuned.

Anyway I'll see what the mechanic has to say when I take the car in. At least now I know I have some room to experiment.

I've run my Skyline up to 7500 for over 9 months now, I have had no drama's with this setting, however yes in Dyno runs I have found that there is no real power increase around the 6500 mark. I am running a Haltech E6K I think with a Stock engine and turbo along with ARE intercooler. I pulled about 187kw out of the rear wells and about 1350nm of Torque which I thought was quite high but this has been verified by two different dyno stations.. Also running the stock turbo at 14psi with a 3" Dump running into a Apexi 3.75 cat back exhaust.. (yes it scraps everywhere). I did a recent check and found compression to be around 135-150 over all 6 cylinders.. I have been told this is about right for a skyline, I dunno? shrug :P I think that a GT2540 would be great to upgrade to with new 700+cc injectors with fuel rail and pump to be upgraded as well. What ya think? do you think a new Cam gears would be wise too?

Aridyne

The exhaust camwheel retarded 3 or 4 degrees is good for enhanced torque low and midrange. In all our dyno runs stock and modified power tended to drop off fairly sharply over 7000. In the early days we hit 8200 on a regular basis.....but not anymore. After 3 years of street/drag/track the engine still doesn't use any oil between 5K changes so I guess the revs didn't hurt it any. When you get it tuned and see your power curve then you can decide on your rev limit

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Finally got shipping number for the intake and throttle body, shipped by UPS, so "should" be in my hands sometime next week, fingers fracking crossed
    • I'm so far behind in the jobs I have to do at both work and home (including car) that I have become immortal. There's simply no way that I can die now.
    • Each to their own I guess  Me, I put just as much time into cleaning inside of the cars as I do on the outside As for getting wet, it is really no different than steam cleaning the carpets at home, apart from the cars carpet dries alot faster than the house, again, I only do it in the hotter months and leave the car opened up for a few hours As I only do it yearly, it is just before I do the diff and gearbox service, so I clean the carpets, then it's up on stands, wheels off, service, clean the undercarriage,  grease the bushings and do a nut and bolt check on everything  Disclaimer: I typically had all the time in the world to kill when I was working 🤣, so spending a full day or 2 cleaning, serving and "looking at stuff" was,  easily achievable, and a fun mental therapy day As for time to kill, I retired last Wednesday, so apart from my physical training, my days are filled with lots of random jobs around the house and garden...."Idle hands are the Devils something something" I am also buying a new house sooner rather than later, I'm actually looking at a potential property tomorrow, I'm looking forward to getting a car hoist as I'm starting to get to old to crawl around under a car, I can only imagine all the undercarriage cleaning and looking at stuff when that gets set up
    • Yeah, I'm not interested in wetting the carpets, and I don't care about brown dirt/dust that lives deep in the pile or underneath. It's not like I crawl around on them in my birthday suit or eat dropped food off them (because there is never any open food in my car). The seats are alcantara (cheap Chinese imitation alcantara, to be sure!) with barely 1" of foam pad behind the surface. That's not getting wet either. Any car that I would be happy to get the interior wet, I would not care to put the effort into.
    • We have one that holds 2.8L of water. On floor carpet that hasn't been touched in 2 or 3 years, will take a minimum of 2 fills of the tank to do a bedroom, and that's going AROUND the bed.   In the cruiser, I used an ENTIRE 2.8L tank, just on the front passenger footwell. But it had some fungus growing, and had been full of mud from being used as a 4WD for many years. I can do that floor again, and it will still pull mud out. However, the water now only looks dirty, not pitch black and leaving full sludge in the bottom of the tank it sucks back into. Oh, and, this is about a $1500 unit.
×
×
  • Create New...