Jump to content
SAU Community

Recommended Posts

Hey boys and girls,

While I wait for my r32 GTR to arrive, i've gone and put down a deposit on a Nissan Bluebird SSS Attesa to drive as a runabout.

Same engine as my silvia, an sr20det, however its east/west, uses a ball-bearing turbo, has AWD and hauls ass for a 'family' sedan!

Unfortunately the car is an Auto, but i'm getting it for a fantastic price so i'm picking it up anyway.

I was just wondering if :

1. anyone knew about getting automatic/manual conversions done specifically on one of these cars

2. there was a specific bluebird/sss/attesa forum anywhere like NS/SAU.. ( I dont think there is! )

3. any SSS Attesa owners are here who can provide some info on the car

and last but not LEAST

4. does anyone know a mechanic at the GOLD COAST who can take a look at the car for me and make sure theres nothing seriously wrong with it, get a compression test done etc. Who would you recommend?

Link to comment
https://www.sau.com.au/forums/topic/49448-nissan-bluebird-sss-attesa/
Share on other sites

It's better to leave the runabout auto in my opinion. The GTR is for driving the Bluebird is for going to the shops or going to work. I would prefer an auto runabout simply because changing gears in traffic is a pain in the ass.

If you must, then yeah investigate a GTiR box.

pretty sure u have to put a non turbo manual box in there with maybe some upgrades,mate of mine had one and his was changed from auto to man and used juts the stnd manual box and as to date it holds up fine,with more boost...

It's better to leave the runabout auto in my opinion. The GTR is for driving the Bluebird is for going to the shops or going to work. I would prefer an auto runabout simply because changing gears in traffic is a pain in the ass.

If you must, then yeah investigate a GTiR box.

Lets not forget it has attesa, which means youre going to have all sorts of funky shit going on with the gearbox that has the front diff in it etc... Email Jeff at C-Red ([email protected]) as he had one in stock a while back and may be able to shed some light on the subject. Alternatively PM me the Chassis number for it and I will look up the nissan Microfisce on it and see if they did infact come out manual etc.

JK

JAIK - It did come out in manual.

51000 - I didn't know that the bluebird came out in a 4wd non turbo. if you mean the AUS delivered fwd non turbo crappy thing, then that gearbox would not work on the jap 4wd turbo version due to not having a transfer case for the rear diff.

  • 2 weeks later...
I was just wondering if :

2. there was a specific bluebird/sss/attesa forum anywhere like NS/SAU.. ( I dont think there is! )

3. any SSS Attesa owners are here who can provide some info on the car

check out www.antrx.com theres a few sss attesa owners on the forums and a lot of info on U12 and U13 models :D

hey guys i had a red U13 Sr20DET .. Auto as well .. they arent that bad for a daily driver.. good solid built only think you have to watch out is the interior built a bit cleaply.. mine was Attessa-X top line auto sunroof wood grain inserts etc.. and yes they did come out in non turbo .. Attessa-S they are .. Sr20DE , both manual and auto.. hope this helps !

  • 3 weeks later...
  • 2 weeks later...
JAIK - It did come out in manual.

51000 - I didn't know that the bluebird came out in a 4wd non turbo. if you mean the AUS delivered fwd non turbo crappy thing, then that gearbox would not work on the jap 4wd turbo version due to not having a transfer case for the rear diff.

The Aus delivered Bluebirds were by no means crappy. They may not be 4wd or turbos, but they more than hold their own even against current medium sized vehicles. Not all Nissan lovers can afford to get the vehicle they REALLY want, so make do as best we can. Yes, I have an Aus model SSS, needs a new clutch soon, but goes great, and for those that may not know, it was/is quicker than a SSS Pulsar. (Aus model)

  • 2 weeks later...

There is so much crap on this thread I don't know where to start. As for a GTiR gearbox into the U13, it could be done easily. Both boxes share the same shape and bell housing bolt patern. You would have to use the Speedo sender and engine mounts from your old box as they are model specific. As for the clown who stated that the GTiR gearbox is crap, I presume you don't own a GTiR. I have blown 3 boxes but I am also putting out over 2 times factory power. You will notice that GTR gearboxes blow at around this type of power output and the GTR is only really RWD at launch. So at the very least, the GTiR box should be considered equal (if not stronger) to the GTR. As for ATTESSA, both the GTiR and U13 use a mechanical version that doesn't really have anything in common with the GTR's ATTESSA ETS. All in all, you can easily convert your U13 to a manual. Using the GTiR's box will give you a viscous centre diff which would be an upgrade to the U13 4WD gearbox with the open centre diff. In saying all this, why worry if this is just going to be a runabout?

yeh my bro's got one of the AUS delivered fwd U13 Bluebird's and i reckon its a pretty good car. The 2.4litre engine it has seems pretty good and its acceleration isnt too bad either. So far it has been a good reliable car. So the turbo, 4WD ones should be a good car as well with a good performer of a motor with the SR20DET.

  • 2 weeks later...
  • 2 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • A few small updates since the previous post and lessons. I decided to do a little interior light upgrade on the 110. I quite like the iilumo items, even if they're a bit of a premium over other brands. You'll also note the Stedi Fogs, that will go into the S15 fog lights as I needed to match the bulbs since I got the new ones earlier. I hope they fit as the body is quite a bit longer than your normal bulb.  Annoyingly, I managed to trip the fuse, which normally wouldn't be an issue until I located the fuse. I can't say I've ever come across this. I had lucked out that someone nearby had a spare, but oddly enough Toyota dealerships seem to keep this in stock. I ordered some to keep in my stash and as luck would have it, someone else nearby tripped the same fuse so I passed on the favour.  I also did a little service on the 110 ahead of some additional work coming up. It's been annoying that Goleby's stopped carrying this particular HKS filter for the 110, so now I need to keep them on order from Japan. I also took the opportunity to install a bash plate and number plate riser. The plate riser is such a cheap but nice fix to help really tidy up the car. I'm tempted to now also replace my headlights, on this car. Both items were from Project Aero.    I also needed to replace the rear tyres on the 110, and after trying to get it aligned learnt that I need to replace some bushes in the front end, so that's next.  Closing out this update with a nicer picture as always! 
    • Yeah mate, never miss it.
    • Any going to watch World Time Attack at SMSP this year?
    • Appreciate the correction on the "ground", that will make a huge difference to looking at this. That makes complete sense about AF70/AF71 which is what I had come down to being the issue, one of these. I'll have another look in the ignition wiring when I get a chance next week. I'll also make up a jumper wire for running that AF73 test.  ECU is fine, relay itself is fine, pump harness is fine and the pump itself is fine. I am going to upgrade the Walbro 255 anyway with a DW300 I have since I need to replace the fuel sender and I'm going to upgrade the FPR with my chasebays kit ready for new plenum/injectors/dbw, but I'll get this working first. That's why this is so frustrating. 
×
×
  • Create New...