Jump to content
SAU Community

Need help (Speed Cameras)


Recommended Posts

On Sunday night I was heading back home on Bourke Rd and there was a mobile speed camera located on a reasonably steep hill. I was doing around 63 and the speed limit was 60, I was not even on the gas simply just rolling down and I got done. Anyway I got out of the car and took photos of the whole scene and even got the video camera out (heading back from autosalon :) ) the guy got out and was pretty irritated by this and began to call his superior. Anyway I was told that they can not book you for speeding when you are coming down on a hill. Is this true? If so I will be contesting.

Link to comment
https://www.sau.com.au/forums/topic/51596-need-help-speed-cameras/
Share on other sites

If the camera was positioned at the bottom of the hill then I dont think they are supposed to set up there... not sure if they're allowed to or not. but they could always argue that's what the brake pedal is for :) bit harsh... getting done for doing 63 in a 60 zone though..

Yeah I was lead to believe that they can't do it on a hill either - but as per usual they put them there because they know 99.99% of people wont bother arguing the case and there is a better chance of getting more people.

I understand that the code of practice for speed camera and radar units states they should not be used in certain locations such as hills. Getting the actual document will be the issue but fight it anyway. A good lawyer will make your case and hopefully obtain costs.

The website is www.roadsense.com.au and I understand they can park on the nature strip under the road traffic act. Another corrupt double standarrd and hopefully you bloody vics will vote the prick out at the next state election. Labor ALWAYS overspend the rape the electorate. Just bloody dumb

Take it to court mate as that is ***ing bullshit!!

Hope you got video of the operator driving off coz that will look quite funny when shown in court.

A simple letter back if you get sent a speeding fine stating all the facts and that you have video and pictures will usually see them drop the fine.

They rely on 99% of people not bothering to dispute it and just paying the fine even tho they could get out of it easily, so dispute it and be the other 1% :D

What you do, see a camera on the side of the road. Park in front of it, lock the car and walk off. He cant tell you to move. If he wants to he can move...

Hate those wanks. Everytime i drive past one i give the operator a 1 finger salute.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Depending on how long the car sat it is very possible for injectors to be stuck open or closed, I'd get them cleaned and flow tested. Other than that, obviously when the loom changes and the car doesn't start any more....the loom is suspect so some tracing / comparing may be required
    • Harness is for a s1 Rb25det, and it is engine and lower harness.  the old harness had broken off plugs and was in very rough condition/exposed wires and splices etc. it is not able to be put back on the car, I could visually inspect to see if they had rewired any pins on the ecu plug. The fuel pump definitly isn’t turning off it’s an external pump and very loud you can hear it. Will look at the other harness tonight, am also going to pull the fuel rail and watch the injectors spray, will update here with what I find. Pretty sure at this point it has to be something to do with injectors because car will fire up on starting fluid and cas is clicking the Injectors. Fuel pressure is steady 43psi 
    • Check the injectors flow evenly, and are actually flowing what you and the ECU think they should be flowing. If it's starting up on starter fluid, you have a fuel issue. Is it possible under cranking your fuel pump is turning off?   The harness you replaced, is that the whole engine harness? Do yourself a test, and drop the old harness on and plug it into the Z32 ECU. It's possible they've wired things different. From memory S1 to S2 is different in RB25 and you may have a wrong loom
    • I haven’t pulled the injectors to watch them spray yet but they are clicking from the cas and all of the spark plugs are wet with fuel. I’ve thought the cylinders were being flooded from the beginning and was hoping fuel pressure would fix it. Tonight I am going to pull the rail and watch the injectors spray. Don’t know how to test/diagnose if the plugs are firing in correct sequence but that should be a timing thing and as far as timing goes my car still has the half moon for the cas can only install it 1 way. And my mechanical timing is 100% correct I posted photos above. Confirmed with the balancer on and off. 
×
×
  • Create New...