Jump to content
SAU Community

Sandown Driver Training - 17th October.


Recommended Posts

Yes, "registerable" is OK. The main problem at Sandown is noise upsetting the locals, so as long as the car meets noise restrictions (75dB(A) at 30 metres drive-by), then it will likely be OK.

So it looks like were all racing (even though it's a track day) I can't wait. All I have done in my car so far is drive it around the block a few times. Need two things at the moment to make me happy as Larry... and none of them involve a woman... sad when you get you get life’s priorities in order!

PS: I just got my GTR... I hope it will wear off soon :rofl:

  • Replies 55
  • Created
  • Last Reply

Top Posters In This Topic

So it looks like were all racing (even though it's a track day) I can't wait. All I have done in my car so far is drive it around the block a few times. Need two things at the moment to make me happy as Larry... and none of them involve a woman... sad when you get you get life’s priorities in order!

PS: I just got my GTR... I hope it will wear off soon :rofl:

Have you run ur car on the dyno as yet to check everything and see what power it is making?

Out of interest who says what is too fast on the day. Obviously if your spinning and heading for the dirt then thats too far, but if you are keeping it on the black stuff?

I'm guessing what you're asking is what is the definition of "5.7 Vehicles are to be kept to less han competition speed." I think the officials (clerk of course, flag marshalls) will have a word to you if you are seen to be driving beyond your limits, or endangering other drivers.

One rule that's stated clearly is "NO OVERTAKING WILL BE PERMITTED IN CORNERS AT ANY TIME". Laps aren't being timed anyway... but doesn't mean u cant bring your own stop watch :) or if you wanna go Hi-tech, use an infrared lap-timer :(

I'm excited. :D

Have you run ur car on the dyno as yet to check everything and see what power it is making?

Not yet. I was planing on getting a tune done last Thursady but that turned to shit like every other plan I had for the car so far. It's just has a standard CAT put in and will probably only do a tune after I swap for a high flow or "so called" high flow.

No Idea at all but would like to think around the 280 - 300rwkw mark???

I'm guessing what you're asking is what is the definition of "5.7 Vehicles are to be kept to less  han competition speed." I think the officials (clerk of course, flag marshalls) will have a word to you if you are seen to be driving beyond your limits, or endangering other drivers.  

Thats all good and well, but does that mean if you have a GT3 Porsche you wont be allowed to go any quicker then 1:35s on the day...or as long as you are keeping the thing straight you will be right to punch out 1:25s:confused:

Thats all good and well, but does that mean if you have a GT3 Porsche you wont be allowed to go any quicker then 1:35s on the day...or as long as you are keeping the thing straight you will be right to punch out 1:25s:confused:

Short answer: I dont know :(

Try ringing NDSOC... ask for clarification. I'm sure they will run through everything in the compulsory driver briefing anyway.

Hope it's not wet on the day as I found out my Simex tyres are totally shit useless in the wet. Can't even get traction at 30-40k/h... found out embarrasingly tonight... won't be appropriate for my gts-t oversteering left and right on the track... especially when this is suppose to be a track training day, not a drift training day.

this is suppose to be a track training day

Exactly.... no one will be pushing you to go hard. It's not about how fast you can go, but more about driving techinques on the track, learning how to take the best line through corners, and getting a feel for being on the track. You will be fine.

:)

I expect it will be a totally subjective decision of the Clerk of Course &/or Stewards. Basically, if you are acting like a tool, then you will be spoken to. If you don't heed that warning, you will be asked to pack up and take your attitude somewhere else.

There's nothing to stop people going 'fast', but there will be a lot of cars running at different speeds on the track at the same time, plus drivers with vastly differing experience and it really is a question of common sense. After all it's meant to be a driver training day as well as a fun day and not getting into 'serious' racing/practice.

I can guarantee you, you will get HEAPS of track time.

At the Maseratti day, you might get 12 laps for your $125. At this day, you will get that many laps in your first session! And for only $85. And you get instruction thrown in.

So come on down, you can simply roll up on Sunday morning and enter then.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Don't even try to run it on the stock ECU if you're going to have the boost controller bring boost above ~10 psi. I've already told you that. If you use the Nistune ECU, you will need to CAREFULLY read the available documentation for Neo tuning, and read some threads on the Nistune forums, to discover the various things you have to do to prevent the ECU from going bananas when the boost is too high. The is a table associated with th boost sensor that must be modified to prevent it from shitting the bed. This is just one of the things that you will need to do to the tune in Nistune, because the Neo turbo ECU will be expecting to see a number of things (such as the TCS) that are not there, and you have to block the DTCs on those. It is totally not surprising to me that you are having the problems that you are, but the solutions to these problems have been known for >15 years. So just get it done.
    • Hi. Sry iam not a mechanic and iam not at the car atm so i dont know 100% but they told they measure those and even try to change those. AFM they have two. Coils are new a they have my old one too. Plugs too. ECU...we have 25 NEO stock and Nistune 25 NEO.   But i dont know if any one those could be the problem and why/if/what can cause this, Only thing they did not check is fuel...but that walbro 255 is new(like 1,5 years)... That fuel pressure gauge idk...but i let them know Any suggestions?   EDIT: how can they know if it is like you say he ECU pull power when it reaches a specific boost level that is too high? Tha car has boost controler
    • Can you clarify what you mean by boost cut, do you mean it misfires both when under load (driving) and when stationary and out of gear? Or does the ECU pull power when it reaches a specific boost level that is too high (boost control issue)? Does it occur at idle with no throttle? When you say "the ECU is OK", what ECU is it and why do you think it is OK? Have you used the NEO ECU, and if so do you have a MAP sensor attached? Same for the AFM, why do you think it is OK? Do you have any way to put a fuel pressure gauge on it (even just a mechanical one between the fuel filter and fuel rail)?
    • Hi.. Just another problem. So maybe you can help. I(my mechanic) done swap from my RB20DE NEO to RB25DET NEO. Everything is OK but we have a boost cut. Coils/Plugs are ok...AFM is ok. ECU is ok. I have Walbro 255 but it "changed" sound few months ago(you can hear it ouside) you did not hear that when it was new(maybe faulty?) Sooo...what now? What can cause this boost cut? It is even when you standing still...
×
×
  • Create New...