Jump to content
SAU Community

Recommended Posts

Hey Guys,

In prep. for the track day at Sandown next month I'm getting the brake fluid changed to a track ready spec so I don't boil it after a couple of laps :flamer:

For those of you (read: any Team Wang members :) )who have changed their brake fluid to a track ready type (higher boiling point) which readily available brake fluid would you recommend for a r33 gtst?? Just to note that the setup is std except for upgraded pads.

Also are there any compromises to using this fluid on the streets?

Thanks

ant95gtr.

Link to comment
https://www.sau.com.au/forums/topic/52320-which-brake-fluid-to-use/
Share on other sites

  • Replies 40
  • Created
  • Last Reply

Top Posters In This Topic

I use the Castrol SRF. Its (apparently) the best - but will send you broke.

Most of the guys use the Motul Dot 5.1. The only adverse effect I know about high quality brake fluids is the lightening of the wallet effect. I stand to be corrected on this however.

Thanks for all the info guys.....had my car at calder a couple of weekends ago at a driver training session.....the comp. circuit isn't very long or hard on brakes but by the end of the day I had to stick my foot through the pedal in order to wash off any speed. Not the best feeling when hoofing ur car round a track ;) I figure that sandown is waaay harder on brakes so gotta get that fluid changed!

Yeh brake fluid is important, and i have no doubt that the Castrol stuff it top shelf, but i suspect most of use can make do with less.

I posted this before...

... i use AP Racing Formula DOT 5.1 Road/Competition Brake & Clutch Fluid. Part No. CP4510 , but may change to Motul RBF 600 whish i have heard good things about. Cheaper and still very effective is the Caltex GP 600 Racing Brake Fluid.

There are lots of guys running the Caltex up in Sydney as Race Brakes up there are now readily using it in all the street / track cars as they have been getting good results with it and it almost a third of the price of the AP stuff i use....from memory it cost $30 for 600ml .

Disregard above post....i need new fluid and pads before Sandown as well so just got some prices together.

The two parties i spoke to said dont bother with anyting other then Motul RBF600, which is $25 for 500ml. They are using in Stokell's Diablo and its working better then all the previous fluids. So good enough for me.

Also as far as pads go, (Prices are all form Race Brakes - Melb)

DS3000 are $385

Track only...save your road pads for the road and race pads for the track. They are actually easier on rotors with less grinsing when they are aup to temperature...so noise isnt the only reason not to use them on the street

DS2500 are $231

Road/track but as Snowman will tell you they aint exactly a great road pad.

RB74 are $160

What i have been using and have always been very happy with, Race Brakes still seem to think they will be up the job at Sandown given my cars weight power and tyres.

As my RB74s have about another 6-9 months of normal driving in them, im leaning towards the DS3000s (or the SAUWA - Hawks) for the track, since ill be changing wheels its only an extra 5 min per corner.

I am going to tack onto this thread and add...

Just got back from picking the car up from Meridian, top stuff in spending like 7 hours fitting the oil cooler to my beast!

I was initially going to get a set of Endless CC-R ceramic pads, but brent from nengun can't seem to source / get the parts... so... time is running out and I need to sort out my brakes.

Was talking to Toby at Meridian, and he was considering organising a group buy on braided lines (though prob not before Sandown).

Also, he uses an ATE brake fluid, one litre for like 50 bucks.

As for pads... thinking the RB74s might get a guernsey as a stop gap before I get these Endless pads. Does anyone think it is worth doing the DS2500s?

I have just fitted a set of ADR approved braided brake and clutch lines. I purchased these for $420 (brakes: front and rear) and $70 (clutch). The brakes are a two piece hose with a block in the middle, just like the originals, and bolt up in the original fittings. I have not yet felt the brakes as the car is still at the w/shop.

MALTECH: Brake Hoses & Cables

0418 378 939

(03) 5253 1931

I am going to tack onto this thread and add...

Just got back from picking the car up from Meridian, top stuff in spending like 7 hours fitting the oil cooler to my beast!

I was initially going to get a set of Endless CC-R ceramic pads, but brent from nengun can't seem to source / get the parts... so... time is running out and I need to sort out my brakes.

Was talking to Toby at Meridian, and he was considering organising a group buy on braided lines (though prob not before Sandown).

Also, he uses an ATE brake fluid, one litre for like 50 bucks.

As for pads... thinking the RB74s might get a guernsey as a stop gap before I get these Endless pads. Does anyone think it is worth doing the DS2500s?

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • I would just put EBC back on the "I would not use their stuff" pile and move on.
    • Can I suggest you try EBC directly again and link them to as many competitor catalogues as you can to show their listing is incorrect, eg https://dba.com.au/product/front-4000-series-hd-brake-rotor-dba42304/ If you have access to an R33 GTST VIN and your VIN, you could also use a Nissan Parts lookup like Amayama to show them the part number is different between 33 GTST and 34 GTT which may get their attention
    • So i got reply from EBC and they just this site where you can clearly see those 296mm fronts on R34 GTT. I send them photos and "quotes" that 296mm are not for 34 GTT and they are too small. But it will be very hard to return them cuz nobody here knows 100% and they just copy those EBC catalogue :-D https://ebcbrakesdirect.com/automotive/nissan/skyline-r34
    • Hi, is the HKS  Tower Bar still available ? negotiable ? 🤔
    • From there, it is really just test and assemble. Plug the adapter cables from the unit into the back of the screen, then the other side to the car harness. Don't forget all the other plugs too! Run the cables behind the unit and screw it back into place (4 screws) and you should now have 3 cables to run from the top screen to the android unit. I ran them along the DS of the other AV units in the gap between their backets and the console, and used some corrugated tubing on the sharp edges of the bracket so the wires were safe. Plug the centre console and lower screen in temporarily and turn the car to ACC, the AV should fire up as normal. Hold the back button for 3 sec and Android should appear on the top screen. You need to set the input to Aux for audio (more on that later). I put the unit under the AC duct in the centre console, with the wifi antenna on top of the AC duct near the shifter, the bluetooth antenna on the AC duct under the centre console The GPS unit on top of the DS to AC duct; they all seem to work OK there are are out of the way. Neat cable routing is a pain. For the drive recorder I mounted it near the rear view mirror and run the cable in the headlining, across the a pillar and then down the inside of the a pillar seal to the DS lower dash. From there it goes across and to one USB input for the unit. The second USB input is attached to the ECUtec OBD dongle and the 3rd goes to the USB bulkhead connected I added in the centre console. This is how the centre console looks "tidied" up Note I didn't install the provided speaker, didn't use the 2.5mm IPod in line or the piggyback loom for the Ipod or change any DIP switches; they seem to only be required if you need to use the Ipod input rather than the AUX input. That's it, install done, I'll follow up with a separate post on how the unit works, but in summary it retains all factory functions and inputs (so I still use my phone to the car for calls), reverse still works like factory etc.
×
×
  • Create New...