Jump to content
SAU Community

Recommended Posts

Guy's - just a quick piece of advice.

I know a bunch of you out there are thinking about / already have gone and bought some of the Bridgestone RE55's. There is no doubt that they are an awesome track tyre BUT if your car isn't set up properly they will be a very expensive investment.

I noticed that my front tyres were wearing unevenly (outsides seemed to be near bald but insides seemed pretty good) But the rears were ok. So last night I was in the process of rotating my fronts to rears - and when the fronts came off I noticed I had 4 or 5 large chunks of tyre missing (the size of a 50c coin) on each tyre and I was down to the canvas in these chunks.

So those tyres are farked. They have done 1 day of the Dutton Rally and 4 track days. If my front suspension / castor / camber was set-up properly I wouldn't have this problem and my $2K worth of tyres would have lasted a lot longer than 2 months.

If you are going to get yourselves a set of these tyres - then spend the money and get your suspension set-up properly or else you are just throwing money down the drain.

:rofl:

Link to comment
https://www.sau.com.au/forums/topic/52404-re55-warning/
Share on other sites

:D :chairshot: :headshot: :whip: :slap: :chop: :tomato:

Ok - in perspective - doing it to make sure you hard earned cash doesnt get wasted is one thing.

Doing it when you haven't even been out on the track before and you are worried about those precious seconds when you don't even know how to drive yet is a whole different story.

From memory that quote came from a thread like the second point - and wasn't necessarily talking about people using semi's.

:)

Link to comment
https://www.sau.com.au/forums/topic/52404-re55-warning/#findComment-1033003
Share on other sites

Im not wanting to sound like the over bearing parent....but another aspect to using these tyres is that becuase they are a lot closer to a slick race tyre then your normal road rubber, be very careful if your car doesnt have ABS.

If you are still coming to grip with pulling a NON-ABS equipped car up and still have a tendency to lock tyres (rears as much if not more then fronts) then perhaps stick with road rubber as well. Flat spots will soon have you thinking that warped a disc and because stickies dont squeel like normal road rubber sometimes its a little hard to pick if you are lockign up.:D

They are awesome tyres, but seriously its more fun on road tyres as the car moves around a lot more, if you make a mistake then you dont ruin tyres, and if your susp settings arent optimised then you can prematurely eat tyres. Try the first time i went to Eastern Creek with stickies i ruined the front right tyre!!!!:)

So run stickies, sure, just be aware like any performance mod there are possible negatives as well.

Anyway ill have a temp probe on the day so if ppl want to keep track of tyre face temp and pressures to see how they tyres are working then that may help diagnose a prob well before you blister a tyre

Link to comment
https://www.sau.com.au/forums/topic/52404-re55-warning/#findComment-1033136
Share on other sites

excellent point Troy. I personally plan to get 55's however I want to have a set of rims with cheaper rubber so I can pull the 4WD fuse and see what the R can do in terms of Dori action :)

They are awesome tyres, but seriously its more fun on road tyres as the car moves around a lot more, if you make a mistake then you dont ruin tyres, and if your susp settings arent optimised then you can prematurely eat tyres. Try the first time i went to Eastern Creek with stickies i ruined the front right tyre!!!!:D
Link to comment
https://www.sau.com.au/forums/topic/52404-re55-warning/#findComment-1033190
Share on other sites

....Flat spots will soon have you thinking that warped a disc and because stickies dont squeel like normal road rubber sometimes its a little hard to pick if you are locking up.;)

LOL...skylinegeoff and me were just working under my car when he spotted the reason you should seriously consider the negatives of semis before bolting them on...thankfully the damage isnt too bad as it was still damp at Phillip Island when i did it.

He got a photo which im sure hel post ;)

Link to comment
https://www.sau.com.au/forums/topic/52404-re55-warning/#findComment-1034677
Share on other sites

The other issue is the knife edge traction in the wet on these things.

Point to note, my fronts were $100 ea Continental SportContacts. Were $100 and have done 4 trackdays and daily driving duties. I still have a least one day left but may get some Dunlop 9000's as they have a little more grip. So what if I could go 5 seconds a lap faster? :rolleyes:

Roy's tyre shows signs of a gradual lockup (tyre still turning after traction is lost and then a brief lockup) but it looks pretty severe. I've had a think about this one and would recommend he get it buffed out ASAP.

Link to comment
https://www.sau.com.au/forums/topic/52404-re55-warning/#findComment-1034834
Share on other sites

All good advice but for those of us who have been running track tyres for ages, without ABS and no the cons if they aren't treated with a driver who knows what they are doing, what suspension settings do you suggest so you don't bugger them. I also enjoy running on road tyres and having gret slip angles over Lukey heights and through turn one at the island but I would much prefer pulling 1.5g through the corner at warp speed on track tyres.

So what's a good setting for camber, castor, front and rear toe for a set of track tyres for a GTS-T??????

Link to comment
https://www.sau.com.au/forums/topic/52404-re55-warning/#findComment-1034838
Share on other sites

I'm no expert Brutus, but i'd say as much negative camber as you can get on the front (-3ish?), decent amounts on the back (-2 to -2.5ish?) and lots of castor, not sure if toe makes much difference to killing semi-slicks

Andrew: Mind if i ask what your wheel alignment settings are when you killed these tyres?

Link to comment
https://www.sau.com.au/forums/topic/52404-re55-warning/#findComment-1034887
Share on other sites

I have also almost gone through my first set of Semi's. Took 6 track days to get below the wear marker on all tyres. I went for the Yoki's A048 because that's all that was avaliable back then. I was pushing pretty hard for the last two Phillip Island weekends, but mine have worn pretty evenly for a car that rolls around a bit.

So be warned... $2000+ worth of tyres doesn't go a long way, but you'll have a great time burning away that money.

Link to comment
https://www.sau.com.au/forums/topic/52404-re55-warning/#findComment-1035207
Share on other sites

... I've had a think about this one and would recommend he get it buffed out ASAP.

Buffed? Drive over to Adelaide did that:)

Brutus...id tell you what i think but dont want to be resposnsible for being way off and costing you a set of front tyres.

Seriously if you are going to run these tyres then id recommend seeing someone like Centreline, there are other places who are reputable but i havent used them so wont recommend them.

Im no expert or professional driver but i have improved a fair bit from wghen i first started these days, and sadly i knowing the pitfalls still damage them, so just be aware.... dont mean to harp but i FREAKED when i killed my first set of fronts and im not too impresses i did a front left at PI. Maybe i need ABS:)

Link to comment
https://www.sau.com.au/forums/topic/52404-re55-warning/#findComment-1035596
Share on other sites

Well aware of the drill. I locked up a front left in my MX-5 going into turn one at Sandown on a 40 degree day. Lock up was not much more than a car length and I did a brand spanker A032R Yoki down to the canvas!!!!

Luckily I was getting my tyres for nicks at that stage.

Biggest difference comes when changing from using fast road pads to full track pads, that is when you WILL lock up brakes until you are used to them. So if down the track you get the driving sorted, go and get some track tyres and then go hardcore on the brake set up, be careful. The above happened when I swithced to Hawk Blues. Amazing pads but man, they were so easy to catch a brake and bye bye rubber. 50c piece tyres anybody......

Link to comment
https://www.sau.com.au/forums/topic/52404-re55-warning/#findComment-1037359
Share on other sites

Well aware of the drill. I locked up a front left in my MX-5 going into turn one at Sandown on a 40 degree day. Lock up was not much more than a car length and I did a brand spanker A032R Yoki down to the canvas!!!!

Luckily I was getting my tyres for nicks at that stage.

Biggest difference comes when changing from using fast road pads to full  track pads, that is when you WILL lock up brakes until you are used to them. So if down the track you get the driving sorted, go and get some track tyres and then go hardcore on the brake set up, be careful. The above happened when I swithced to Hawk Blues. Amazing pads but man, they were so easy to catch a brake and bye bye rubber. 50c piece tyres anybody......

Did your MX-5 have ABS?

Link to comment
https://www.sau.com.au/forums/topic/52404-re55-warning/#findComment-1037373
Share on other sites

Nope......

But it was never a problem with fast street pads on the track or after this one occurance I never locked it up again with these pads, just getting used to a new dimension in braking compared to what I had used before.

Not an ABS problem, a lack of familiarity with new equipment problem......

Link to comment
https://www.sau.com.au/forums/topic/52404-re55-warning/#findComment-1037553
Share on other sites

Nope......

But it was never a problem with fast street pads on the track or after this one occurance I never locked it up again with these pads, just getting used to a new dimension in braking compared to what I had used before.

Not an ABS problem, a lack of familiarity with new equipment problem......

You just freaked me out:) Im about to go from RB74s to Ferodo 3000s :) Oh well suck it and see.

Just re-read some of this thread and it seems like all doom and gloom with R-spec tyres...its not, just be aware of the pitfalls and you will get plenty of use and enjyment out of them. :cheers:

Link to comment
https://www.sau.com.au/forums/topic/52404-re55-warning/#findComment-1037601
Share on other sites

haha yeah these GTR cheaters are never happy.

R tyres are great but they sure don't last forever. On my GTST the fronts would last 4-6 track days, the rears 6-8 track days. Unfortunately they were different sizes front to rear so I couldn't swap them, only side to side.

My tips are:

* Rotate them Left to Right halfway through their life, ie after 3-4 track days. Also rotate front to rear every time if you are a cheater with a GTR.

* Get ABS :cheers: Save yourself from that horrible feeling of wrecking a good tyre. I've done a few over the years and it hurts (the wallet) every time :(

* Drive smoothly....if you are getting heaps of over or understeer you need to try something different (unless you just set the lap record, in that case you are probably going as quick as the tyres allow :))

* Run a bit of camber on the track if you can

* Always run the right hot pressure for the tyre and track. Its easy. Start at about the pressure you need to aim for (cold tyres). Do 2-3 laps, come into the pits and let them down to the correct temp, they will be 4-8psi too high. Find out the right hot pressure for your tyre from the distributor....THEY ARE ALL DIFFERENT

And, don't worry too much about them, they do die....but then you are kidding yourself if you think a road tyre would last 6-8 track days, plus there is the bonus of heaps better traction from the cheater tyres ;)

Link to comment
https://www.sau.com.au/forums/topic/52404-re55-warning/#findComment-1037632
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I got back to Japan in January and was keen to get back on track as quickly as possible. Europe is god-awful for track accessibility (by comparison), so I picked up a first-gen GT86 in December just to have something I could jump into right away. The Skyline came over in a container this time and landed in early January. It was a bit battered after Europe, though—I refused to do anything beyond essential upkeep while it was over there. The clutch master cylinder gave out, and so did the power steering. I didn’t even bother changing the oil; it was the same stuff that went in just before I left Japan the first time. Naughty. Power steering parts would’ve cost double with shipping and taxes, so knowing I’d be heading back to Japan, I just postponed it and powered through the arm workout. It took a solid three months to get the car back on the road. Registration was a nightmare this time around. There were a bunch of BS fees to navigate, and sourcing parts was a headache. I needed stock seats for shaken, mistakenly blew 34k JPY on some ENR34 seats—which, of course, didn’t fit—then ended up having the car’s technical sheet amended to register it as a two-seater with the Brides. Then there’s the GT86. Amazing car. Does everything I want it to do. Parts are cheap, easy to find, and I don’t care what anyone says—it’s super rewarding to drive. I’ve done a few basic mods: diff ratio, coilovers, discs, pads, seat, etc. It already had a new exhaust manifold and the 180kph limiter removed, so I assume it’s running some kind of map. I’ve just been thrashing it at the track non-stop—mostly Fuji Speedway now, since I need something with higher speed after all that autobahn time. The wheels on the R34 always pissed me off—too big, and it was a nightmare getting tires to fit properly under the arches. So I threw in the towel and bought something that fits better. Looks way cleaner too (at least to me)—less hotboy, less attention-seeking. Still an R34, though. Now for future plans. There are a few things still outstanding with the car. First up, the rear subframe needs an overhaul—that’s priority one. Next, I need to figure out an engine rebuild plan. No timeline yet, but I want to keep it economical—not cutting corners, just not throwing tens of thousands at a mechanic I can barely communicate with. And finally, paint. Plus a bit of tidying up here and there.  
    • Nope, needed to clearance under the bar a little with a heat gun, a 1/2" extension as the "clearancer", and big hammer, I was aware of this from the onset, they fit a 2.0 with this intake no problems, but, the 2.5 is around 15mm taller than a 2.0, so "clearancing" was required  It "just" touched when test fitting, now, I have about 10mm of clearance  You cannot see where it was done, and so far, there's no contact when giving it the beans Happy days
    • It's been a while since I've updated this thread. The last year (and some) has been very hectic. In the second-half of 2024 I took the R34 on a trip through Germany, Italy, France and Switzerland - it was f*cking great. I got a little annoyed with the attention the car was getting around Europe and really didn't drive it that much. I could barely work on the car since I was living in an inner-city apartment (with underground parking). During the trip, the car lost power steering in France - split hose - and I ended up driving around 4,000kms with no power steering.  There were a few Nurburgring trips here and there, but in total the R34 amassed just shy of 7,000kms on European roads. Long story short, I broke up with the reason I was transferred to Europe for and requested to be moved back to Japan. The E90, loved it. It was a sunk cost of around EUR 10,000 and I sold it to a friend for EUR 1,500 just to get rid of it quickly. Trust me, moving countries f*cking sucks and I could not be bothered to be as methodical as I was the first time around.
    • I assume clearances were all a-okay?
×
×
  • Create New...