Jump to content
SAU Community

Recommended Posts

Hey guys,

Wats up with that horseshoe at wakefield. It says u should be at 80 setting up for that horseshoe so that means u should be taking that HS at 80 km/h?..

Im sitting on 3rd gear at this point.

Ive run that track twice now and also 6 20min sessions each. And the highest ive tacken that corner is at 65km/h The thing is that is my slowest part of the track and is the main problem point in attaining a good time.

BTW im running coilovers and 17x9.5 inch pirellis.

Any suggestions?.

Link to comment
https://www.sau.com.au/forums/topic/52537-the-horseshoe-at-wakefield/
Share on other sites

  • Replies 45
  • Created
  • Last Reply

Top Posters In This Topic

i cant believe you have time to look at it!

i really dont get much time to look at the tacho or speedo on that corner so i cant really comment on the speed through there!

what times are you getting around there? what does the car do on that corner ie understeer early/midcorner/exit or oversteer?

where do you turn in on that corner? i try to stay right out and turn in at the access road coming in there on your right!

:confused: I have no idea what to suggest, other then you may be screwing up the corner entry to the keyhole by coming out of the quick left hander preceding it all wrong.

I have no idea how quick i go thru there other then i have good few revs in 3rd, so perhaps dont take the left hander so quick/wide which will leave you on the right side and speed for the two right handers that follow.

Oh and dont forget the curbs and even a few inches of dirt either side constitute the track so use all of it:)

Ive set it up alroght for the turn preceeding it. I have quick glances on the speedometer as im turning out of the wide corner. My times are 1:17 and so forth unoficialy.

I get plenty of oversteer. Whilst trying to cut back thru the middle apex and swinging the back out. To connect to the next racing line. Hmmm.

My mate in his FWD type r can hammer thru it at 70km/h.

hmm just remember that a FWD car should be able to have a better entry speed than most RWD cars, so it really depends on when the 2 of you are looking at the speedo!

1:17 isnt bad at all, especially after only 2 times down there! will take some time out there and it is a good suggestion by Duncan to get out there with the club and see how others are taking that corner!

might have to head down there in november, got some good tyres for the car now, im looking to break into the 1:14's next time down there.... see how we go

man.. i think im gonna be recovering from the one past (financially) for the next 3 months at least. Rotors, brakes and rear new tryes need replacing and also new clucth.. :burnout:

Still will also hope to get into the 1:14's as well soon. But why does it always seem to be so much harder to get that 1 sec off?.. LOL

yeah true, only got 8/10 sec to take off, but i know how you feel.. i go through brakes every time i go down there! i've had to drive back with no front brakes twice... using the HB to slow down and gears ... not fun!!!

i've always run cheap sime tyres - they last forever.. not much grip though :)

only things im missing now is running slicks to decrease the time. But fcuk i wanna see wat i could do with street tyres. Yeah on the way back all the boyz had to use the HB b/c the brakes were all gonseskiiiii... Mies was all the way to the bottom to stop.. LOL

Hey do u guys know of this old guys there that owns a amg merc.. that did like 1:12's. The things had slicks on and looked stock as. He was driving that 100k + car around like it was on rails.. Overtaking everybody. My mates says he is there often. Who the **** drive a merc amg around like that?.. LOL

AMG and M's are should be thrashed on the track. It's always good to see that stuff. Like walking through back through the city after work one day saw a PHAT GT3 parked with all towing rings on it and stuff. Thought he was a poser but looked closer the whole insides were ripped out, had buckets, harness and the CAMS required blue triangle at the battery sticker and such.

That put a smile on my face.

Ceffo you have to take me to WSID soon when I get my steering and clutch cylinder problems fixed.

Ceffo you have to take me to WSID soon when I get my steering and clutch cylinder problems fixed.

hahaha u nut - When u go to WSID thats where the problems start. Blown gboxes, turbos going, clucth frying, tyres fcuked. :wassup:

Still why drive a performance car when u cant see how much fun having in it.

I just gotta get me some 17"s or something.

hey, what size tyres are you running now....

i have worked out with a couple of saloon cars to get their 2nd hand race tyres pretty sheap per set -- they are 16" 225's

we could work something i reckon!

Guys just to let you know I run a Formula Ford with a Data Logger.  My speed around that corner is in the high 70's.  I run 64 - 65 sec laps.

haha that blows my 70-90 theory lol! I guess I'm always looking when I've left the corner not when I'm in in.

What speed for turn 10? and turn 2? this is fun :P

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • There's restrictor pills in the stock boost control hoses. That's how they set the amount that was bled off and hence the "high" boost setting. The usual mod in the day was to remove it and send the "high" boost setting up to about 14 psi.
    • Thanks Duncan, that's the best info I've read. Furthermore after learning about the PCM programming side controlling the factory boost solenoid, the purpose of the solenoid is to "bleed" boost when pin 25 is earthed, thus allowing spring pressure in the wastegate actuator to overcome diaphragm boost pressure, thus closing or reducing the position of the wastegate flap creating more boost as the turbo is able to spin faster. It's pretty cool to see a designated Pill to do exactly this, would have liked to have seen it with a tiny filter over the end for those moments in vacuum.  The constant bleed pill has now been removed completely from the system and solenoid boost control has been restored once again.   Case closed 😂
    • The wideband reading is meaningless if it's not running. Why are you using shitty old sidefeeds on any engine, let alone a Neo? What manifold and fuel rail are you using to achieve that? Beyond that, can't help you with AEM stuff as I've never been their ECU/CAS combo.
    • Manual boost controllers (where a little of the boost was bled off) were quite common back in the day, because they were cheap and easy. Generally they had a manual adjustment screw rather than being fixed like yours. Down side is they always bleed boost, not just when you want them to so an electronic boost controller that uses a solenoid will have less lag.
    • Hello , im new here and i have A31 home build  RB25det neo stock eng / turbo  aem ems 2 blue connector  aem 3.5 map aem cas disk aem wideband connected to ecu  355 lph pump 550 nismo yellow injectors side feed aftermarket regulator  and won’t start with base aem tuner basic tune eventually flipped cas 180 degree so it triggers on correct stroke not in exhaust cycle  Now it won’t start Wideband reads 10 and 11 at lowest fuel setting  and will share calibrations soon for aem tuner i think something is wrong in aem tuner    please if you have any information, am very grateful         
×
×
  • Create New...