Jump to content
SAU Community

Recommended Posts

Spotted Luke and Kacey (fat-lad and Coastal Chill) tonight in their silver s1, and also spotted Ian (Xmetal) who'd tagged along with them for the cruise to the Thursday night Central Coast meet-up.

spotted dark green series 2 possible goldzilla at the m2 roadworks heading home from the coasty...

If it was last night (or, technically, early this morning) between around 12.15am and 12.30am, then that was me. My car's an s1, though...

Where were you? You're not one of the road workers who blocks the lanes off for 4kms and reduces the speed limit to 40km/h, so they can do road works for, what, all of 15 metres, are you? That is REALLY annoying!

s1 my bad i only saw your ass end as you passed me..

And yer thats me.. last night was 2.5km of fast lane closure so some f/wit engineer could inspect the lane line because it wasnt "sparkly enough" for him, that big a set up so a ute can drive along heating up two 30m sections of the line and throw some glass bead on to it.. The roads 1000 times better than it was but unless they get organised on what work needs to be done and in what order(or do the job right the first time) theres going to be more pissed off drivers and even bigger set ups..

On a good note thanks for slowing down to 40km/h not to many people do and it can get kinda scary with all those trucks and cars flying passed at 110km/h+ just shows who the hoons realy are..

s1 my bad i only saw your ass end as you passed me..

And yer thats me.. last night was 2.5km of fast lane closure so some f/wit engineer could inspect the lane line because it wasnt "sparkly enough" for him, that big a set up so a ute can drive along heating up two 30m sections of the line and throw some glass bead on to it.. The roads 1000 times better than it was but unless they get organised on what work needs to be done and in what order(or do the job right the first time) theres going to be more pissed off drivers and even bigger set ups..

On a good note thanks for slowing down to 40km/h not to many people do and it can get kinda scary with all those trucks and cars flying passed at 110km/h+ just shows who the hoons realy are..

LOL, my mate's been working on the M2 upgrade/resurfacing lately too, I've heard. He drives a profiler. The new surface is awesome, so much quieter to drive on! As long as there are "cats' eyes" on the lane markings, I prefer hotmix everywhere for road surfacing. The only time it sucks is when it's raining because without the cats' eyes you just can't tell where the lanes go.

Oh, I almost always slow down, and will do it more now that there are mobile speed cameras around - I've never been booked for a driving offence, and I'm not going to start now.

LOL, my mate's been working on the M2 upgrade/resurfacing lately too, I've heard. He drives a profiler. The new surface is awesome, so much quieter to drive on! As long as there are "cats' eyes" on the lane markings, I prefer hotmix everywhere for road surfacing. The only time it sucks is when it's raining because without the cats' eyes you just can't tell where the lanes go.

Oh, I almost always slow down, and will do it more now that there are mobile speed cameras around - I've never been booked for a driving offence, and I'm not going to start now.

cool i don't look after the profiler very often but im the only daniel onsite so tell your mate to come up and say hi sometime....

Spotted a grey C34 Stagea zooming through traffic on Parramatta Road, just near the M4 entrance at Concord at 7:45 tonight.

Was going to give you a wave but you disappeared into the distance.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • That's actually encouraging to be honest. my motor was rebuild many years ago but it's probably done less than 30,000kms and fucc all limiter or drift, majority street / drag / roll racing. It'll be fine 💪🏼 I don't even have lines or a can for the cam breathers installed yet, there is zero oil residue or splatter on or around them, it drives beautifully so it seems healthy. Just a ticky lifter, yet they're almost brand new oem genuine Nissan and haven't done many kms at all...
    • Have you confirmed the throttle body goes to WOT (and stays there) during the run?
    • I'm having a problem. I think it was mentioned above somewhere but can't see it.  I'm stuck in the cycle of, sand, filler, low spot again, put filler, sand, low spot again, now i put filler again and a thicker portion which seems to have helped but I got low spots in other areas. In the image. Circled in red thats where the original low spot was and the shape is the same as the red out line. I've more or less fixed that (still low spot up the top but now I have low spots where the green circled part is.  Is likely the issue that I didn't start with a course sand paper? I sanded the filler with 240 to reduce the risk of not going to far but maybe the issue is that I'm only taking off enough material to remove some of the filler but not the high spots. I now started sanding with 120 and I think I'm seeing a difference. I did fix one dent the other 2 are f**ked and seems like I made another low spot which is indicated by the furthest green circle on the left handside. Any thoughts and solutions?   Also second image. All of these rock chips, can they be filled in with primer or do i need to fill them all with filler/putty? So many rock chips on mine lol.
    • Well, I had an Edward Lee's special edition odo windback car/motor with a RB25DET S2 and I put down 372kW with a good amount of track abuse for 1.5 years before the ring lands decided it didn't want to stick around anymore 🥲 But probably didn't help I kept on smashing try limiter on the track and a few skid pans.
    • That is correct,  I have a forged RB25/30det NEO hiding away safely and I wanted to use the very rare greddy vct adj cam gear on this new setup and so I just used the whole thing on my s1 instead of pulling it appear because I'm lazy af 😅🤌🏼
×
×
  • Create New...