Jump to content
SAU Community

Recommended Posts

hey how r ya all, im new and dont have a skyline yet. but they r the maddest cars around and hoping to get 1 soon. im lookin at an r32 GTR if i can find a cheap 1 through a private importer. just wondering if there r any people that kno a good price to pay for 1 and who would b a good company to go thro to import it.

Link to comment
https://www.sau.com.au/forums/topic/53984-importing-an-r32/
Share on other sites

Well you probably COULD pick one up for $17,500... dunno if it'd be drivable though... You'd have to do more work than its worth to get it up to scratch if you got something at that price.

I'd suggest saving a bit more and spending ~$25,000 that way you should get a nice clean example with prehaps a few light mods.

Just my view though and I'm only a novice at importing too...

Link to comment
https://www.sau.com.au/forums/topic/53984-importing-an-r32/#findComment-1059727
Share on other sites

They used to be available at that price when you had to store them for up to a year before they could be brought in, but now the cars are actually landing here, the price has gone up to the early $20ks even for an unmodded one.

For some reason the price of R34s has skyrocketed also .... just when I was thinking about getting a GTR too :)

Link to comment
https://www.sau.com.au/forums/topic/53984-importing-an-r32/#findComment-1060829
Share on other sites

i have just been lookin on prestige motor sports and have noticed that the cheapest 32 GTR is in the 19's. looks like i will have to b spendin around 21-23 for a decent one. oh well they r mad cars and think it will b worth it, i hope! cheers for ya help so far fellas!

Link to comment
https://www.sau.com.au/forums/topic/53984-importing-an-r32/#findComment-1061149
Share on other sites

Yea the reason the price has gone up is because they are now an eligible import, as of May or June I think and therefore everybody has been buying them, pushing the price up. Before they were cheaper, but it costs quite a bit of cash to store a car in Japan for 3 - 6 months until they're elgible to import

Link to comment
https://www.sau.com.au/forums/topic/53984-importing-an-r32/#findComment-1061227
Share on other sites

For what? I just brought a TT Soarer over about 6 months ago and that cost bout $4500 in compliance, but that was because they were the only place in Adelaide who could do compliance and so they charged what they want. Now I think its around the $3500 - $4500 mark, depending on what car you get. Also, prices vary from state to state. However, for an '89 model GTR under the 15 year rule it only requires minimum compliance which is generally between $500 - $1000.

Link to comment
https://www.sau.com.au/forums/topic/53984-importing-an-r32/#findComment-1061832
Share on other sites

i kno it maybr illegal but does anyone kno anything bout Ghosting or rebirthing? saves the problem of having to go thro compliancing. or where i can pick up a GTR compliance plate? if so i might b able to get a 1992 GTR cheap, uncomplied so thats why im lookin for the plate.

Link to comment
https://www.sau.com.au/forums/topic/53984-importing-an-r32/#findComment-1063445
Share on other sites

Nicely put Max. Btw, what happen to the "flying chicken?"

I bought myself a GT2540, but been rip off by the jap (rare but it happen). The turbo was stuffed. :whip:

i might put in on eBay soon with the price i pay for it, feel sorry for "someone".

Then after a few thread about the weak gearbox i am not going to bother with bigger turbo, as i don't want to downgrade to 5 speed while not able to spend 5-6k for a nismo 6 speed.

the stockie will stay and a SAFC will going into the car soon.

so from now on my money will be invest on handling side, suspenion, bar, stablizer...

while a set of R32 GTR brakes with aftermaket rotor and pad has been pushased and going on the car soon, too.

It's all going to happen after the exam. :P

i am also thinking of getting a LS400 for daily as they seems pretty cheap - black, lower, 19" chrome and killer sound system... :D

Link to comment
https://www.sau.com.au/forums/topic/53984-importing-an-r32/#findComment-1073596
Share on other sites

if i was to get a 15yo GTR i wuldnt worry, i was lookin at a 92 - 94. but i found another importer that does way cheaper cars including compliancing. now lookin at a 1994 BNR32 V spec. has a couple 4 sale. i wasnt gonna steel no cars, i wanted to find say a smashed up GTR and get the compliance plate off that and then import 1 and stike the place on it. that was only an idea from a mate that use to work in import yards

Link to comment
https://www.sau.com.au/forums/topic/53984-importing-an-r32/#findComment-1077611
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Ha, well, it's been.... a bit of a journey. Things have taken much longer than I'd hoped. I'll probably put up a thread at some stage. Hopefully soon. The car's not done any kms since my update in June though, put it that way.
    • Here's the chart for fuel pressure vs. current draw, assuming your base fuel pressure is 3 bar and you run like 0.5bar boost on WOT, you should only momentarily hit 9amps here and there. (Ignore my prev post, I cannot read a chart these days it seems)
    • Those comp test results are not hideous. Whether they are accurate or not (ie, when that comp tester says 140 psi, is the real pressure120, 140 or 160?) is unknown to us. The state of the battery used to crank it over is unknown, etc etc. Many people around here would say that the absolute values and the spread are perfectly fine to just add boost and keep going. I personally would be happier with a narrower spread than that, but even the diff between 125 and 145 is not terrible. That one cylinder at 125 though, has probably copped some damage relative to the others. You should inspect the valves seeing as you've got it open. Do you know how to measure installed ring gaps? That, and an inspection of the rings themselves, is how you will determine whether they need to be replaced. If you're not good to do these things, take the block and the pistons and rings to a shop that is, and ask them for the go/no-go on them. Do the bores need a hone at all? If so, you might well be justified in getting some different pistons in order to get away from the ring supply problem. Whether you're happy to spend a lot more money right now, on more gear, rather than less money, but an amount that looks stupid given that you will only get a handful of rings in exchange for that money, is for you to decide.
    • also possibly backed up to my filler and shat down it! 🤣
    • Ok so i would love some advice here please, i purchased an R33 a few months back and its had a few mods done to the engine, its an RB25det running a Master ECU, 1200cc injectors, bigger turbo, oil cooler, oil filter relocation kit, Spool H-beam rods, acl/ross pistons. When i removed the motor from the vehicle (as its getting a respray) i thought i would compression test it and these are the following results. Cylinder 1-145psi, Cylinder 2-143psi, Cylinder 3-125psi, Cylinder 4-145psi, Cylinder 5-140psi, Cylinder 6-135psi this test was done with the motor on the ground and powering up the starter motor. I dropped the sump and found broken oil squirters on cylinder 3,5 and 6. I was told my rings are probably worn so i stripped the motor completely to get a new set of rings for it. The trouble is no one has these rings anywhere and they have to be custom made by Ross over in the states and will cost about $600+$200 delivery. My question is how can i tell if my rings are at fault and if they are still ok and is this price ok for a set of rings?
×
×
  • Create New...