Jump to content
SAU Community

Recommended Posts

The way these precision turbos spool up wouldn't surprise me if you got less lag than with the twins.

But each to their own.

I was that way for a long time and after 2 different turbo combos I wasn't happy with I eventually switched over. I found the twin upgrades were the worst of both worlds - laggier than stock but didn't have enough punch up top for me.

Well helps you only need to buy one of everything!

I found it similar or cheaper than the twins. Makes everything so much simpler. If I wasn't stupid and chasing power I'd have gone the same setup that Jez has or maybe one size up (haha again chasing power I can't help myself).

Im Just going to put this here. Am i the only one that HATES WITH A PASSION people that are "trying" to sell their car and they put artistic shots of the fker that show nothing of the car. Im talking like looking at one wheel down the side. How do they expect to sell it when they don't show the car properly?

Free TV dumping is awesome!!! Have done 3 CRTs in the past months and a HUGE Plasma yesterday.

To think they used to charge at least $15 each.

Up Yours TINY !!! :nyaanyaa:

Aww what was wrong with the plasma? :(

Was so funny today... one of the TV's was the heaviest TV in the history of TV's... struggled big time! When we dropped it off the little man even got off his forklift to help us because we looked so pathetic :laugh:

Aww what was wrong with the plasma? :(

Got it for Free, had CRAZY colours all stripey on the screen even with no antenna plugged in, couldn't even get a picture, would cost $100 just for a Pro to look at it & yes it was heavy as all Buggery. Extremely unfortunate. :(

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • You’ll be very upset when you bust that too not to mention the gearing totally sucks. Don’t do it.
    • Is the panel filter one that is oiled? Have you ever cleaned or touched the AFM?
    • So.... the K&N air box thingo was too big, ended up gifting it to a mate, well, by gifting it he actually supplied food and beer at the pub,  which was nice, as it will not sit on a shelf in the garage for the next 10 years I did trim up some of the existing stuff to neaten it all up and gave it some wrinkle paint, unfortunately it currently has a used and abused mish mash of different types of hose clamps, 4 big fat T bolt type (shit), and a few normal clamps of vairing sizes and brands, but..... only until the 6 constant tension black worm clamps that I ordered from EFI solutions turn up next week Currently the current hose clamps are triggering me hard, LOL Is this the final version, probably not, I really want just 2 silicone pieces, a straight bit of silicone from the filter to the MAF is easy and will happen as soon as I head into Just Jap tomorrow, the problematic part is a 30° silicone bend from the MAF to the TB that I can connect the engine breather from the head, I found that there are bulk head fittings for boat bilge pumps that should work, but until I can get a 30° silicone bend the alloy pipe, and the 11ty thousand hose clamps, are there for the foreseeable future 4 hose clamps are golden, 6 are grudgingly acceptable, the 8 currently holding it all together is just taking the piss    I've also ordered 60 more retaining wall blocks for the front yard, I mis-gonculated the height that was required to get above the base of the Photinia's (red robin's) that are the hedge behind the front fence, currently it is 2 blocks high, and about 1/2 a block short, so going 3 blocks high will be above the base of the red robin's, and allow some room for mulch
    • It is the stock air box with the panel filter. Everything else is stock except the exhaust at this point, as I also went back to the cleaned 270cc injectors. I will check the RPM when the IACV is unplugged and report back.
    • As MBS suggested if this is happening when the engine is cold you're going to want to remove the intake air regulator and verify resistance + that the shutter is physically opening and closing. At -20C should be fully open, 20C half open, over 60C fully closed. At 20C should be 70-80 ohms. For AAC valve testing using a Consult cable see if you can raise and lower the idle by commanding more or less AAC duty cycle. Hopefully it's pretty linear as well, shouldn't be like 30% AAC valve is barely idling and 40% is 1500 rpm.
×
×
  • Create New...