Jump to content
SAU Community

Recommended Posts

Hope it clears up today. Wanted to go for a drive, maybe north side, and check out Rosie.

Friggin windy & rainy still but a glimpse of blue sky - hopefully blow over

It's sunny over this side - I'm heading over to Rob's (2mins from my place) and working on Rosie (Spark plugs) - Can go for a quick cruise-about afterwards if you're heading to the North shire Richard?

Having a suspicious engine cut out at 5,500 RPM in 3rd.

Edited by RosieR34

It's sunny over this side - I'm heading over to Rob's (2mins from my place) and working on Rosie (Spark plugs) - Can go for a quick cruise-about afterwards if you're heading to the North shire Richard?

Having a suspicious engine cut out at 5,500 RPM in 3rd.

how much boost are you running?Im running 14PSI and its still alright for a 1.1gap.Im changing mine soon and not sure if i should stay with bigger gap as it gives a better spark or just go for 0.8gap

how much boost are you running?Im running 14PSI and its still alright for a 1.1gap.Im changing mine soon and not sure if i should stay with bigger gap as it gives a better spark or just go for 0.8gap

I'm running 14 PSI at 5,000 RPM and when it gets to around 6,000 RPM a MASSIVE boost increase happens - Rob can confirm this weirdness. However, the Engine cut out has been fixed after Rob and I changed the Sparkies. I think the gap was 0.8 (Rob can confirm).

Surely 14 PSI is unsafe - I was planning to get a R32 GTR Accularator (Spelling?) which will give me 10 PSI.

pretty sure you mean an r32 gtst wastegate actuator. It's the brass fitting that controls boost through the turbo's internal wastegate.

But unless you can easily find one, it is just as easy to use a standard actuator and a bleed valve to get 10-12psi. If you are running 14psi someone has already been fiddling with your boost control, but it's not really like an instant turbo death sentence

32 GTST Actuator. You talk to me...

I honestly think it is all plumbed in wrong and is bleeding all actuator pressure back into the BOV return pipe, therefore Not opening the Gate.

I thought maybe as 33 turbs seem to Splode over 12 psi maybe 34 OP6 turbs would possibly be the same safe level???

Edit* Are OP6s steel not ceramic?

um - not sure that's good value for money. Check through Cooma Diesel (GCG, Garret reps) the cost ....

I was quoted $900+ per turbs way back when.

New = $1250ea for -7's. Now they are $2300 a pair.

You may wish to join Erics GB on the HKS ss' when you find out the price.

He's doing a pair with full kit for $3k :D

(expect commission if he does Mr Deziner)

Edited by Sinista32

You guys totally lost me. So 14 PSI is too much and should be at 12 PSI.

What's this about rebuilding a turbo? Kinda want to avoid that.

EDIT: So 14 PSI max is okay - but to be safe I should be at 12 PSI?

Edited by RosieR34

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Yes, I know🙄 but the sequential is not in my budget... don't want to reduce power neither, so looks like I'm stuck in the rabbit hole🤣
    • You’ll be very upset when you bust that too not to mention the gearing totally sucks. Don’t do it.
    • Is the panel filter one that is oiled? Have you ever cleaned or touched the AFM?
    • So.... the K&N air box thingo was too big, ended up gifting it to a mate, well, by gifting it he actually supplied food and beer at the pub,  which was nice, as it will not sit on a shelf in the garage for the next 10 years I did trim up some of the existing stuff to neaten it all up and gave it some wrinkle paint, unfortunately it currently has a used and abused mish mash of different types of hose clamps, 4 big fat T bolt type (shit), and a few normal clamps of vairing sizes and brands, but..... only until the 6 constant tension black worm clamps that I ordered from EFI solutions turn up next week Currently the current hose clamps are triggering me hard, LOL Is this the final version, probably not, I really want just 2 silicone pieces, a straight bit of silicone from the filter to the MAF is easy and will happen as soon as I head into Just Jap tomorrow, the problematic part is a 30° silicone bend from the MAF to the TB that I can connect the engine breather from the head, I found that there are bulk head fittings for boat bilge pumps that should work, but until I can get a 30° silicone bend the alloy pipe, and the 11ty thousand hose clamps, are there for the foreseeable future 4 hose clamps are golden, 6 are grudgingly acceptable, the 8 currently holding it all together is just taking the piss    I've also ordered 60 more retaining wall blocks for the front yard, I mis-gonculated the height that was required to get above the base of the Photinia's (red robin's) that are the hedge behind the front fence, currently it is 2 blocks high, and about 1/2 a block short, so going 3 blocks high will be above the base of the red robin's, and allow some room for mulch
×
×
  • Create New...