Jump to content
SAU Community

Recommended Posts

Seriously don't think so Shell. It's not like it's plugged into socket.

It will be hard wired and terminated in box on the oven. Definitely an electrician required.

If you managed to find someone not qualified then the sleepless nights worrying about it and the possibility of something grave happening.

Call in a qualified electrician :thumbsup:

Edited by Sinista32

Some have plugs.

And the ones that dont are hard wired.

Youd be pretty game just to touch it, what if you didnt turn off the power properly?

Elecricity- cant smell it, cant hear it, cant see it, when you feel it, your fried.

Ah ok, thanks guys. Just thought I could avoid having to call out an electrician twice. Was definitely going to call one to install new one.

And yeah I would have turned the mains off completely!

You should be fine to got to the outside fuse box and switch it off...

I'm fairly sure it has to have its own circuit breaker by law because its hard wired.

But if you feel safer turn them all off

Bloody Pat! Did you know that him and Nicole got married?

It's ok, I will just suck it up and pay whatever needs paying.... just thought disconnecting might be easy.

I really need to actually advertise my car for sale so I can afford all this stuff lol

You wanna live with him but you wouldn't live with me... :( flamin mongrel!

A new house in Casey might just have a Kitchen made by my work as we have done many in Casey.

If so, my fingerprints will be all over it. :ninja:

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Yes, I know🙄 but the sequential is not in my budget... don't want to reduce power neither, so looks like I'm stuck in the rabbit hole🤣
    • You’ll be very upset when you bust that too not to mention the gearing totally sucks. Don’t do it.
    • Is the panel filter one that is oiled? Have you ever cleaned or touched the AFM?
    • So.... the K&N air box thingo was too big, ended up gifting it to a mate, well, by gifting it he actually supplied food and beer at the pub,  which was nice, as it will not sit on a shelf in the garage for the next 10 years I did trim up some of the existing stuff to neaten it all up and gave it some wrinkle paint, unfortunately it currently has a used and abused mish mash of different types of hose clamps, 4 big fat T bolt type (shit), and a few normal clamps of vairing sizes and brands, but..... only until the 6 constant tension black worm clamps that I ordered from EFI solutions turn up next week Currently the current hose clamps are triggering me hard, LOL Is this the final version, probably not, I really want just 2 silicone pieces, a straight bit of silicone from the filter to the MAF is easy and will happen as soon as I head into Just Jap tomorrow, the problematic part is a 30° silicone bend from the MAF to the TB that I can connect the engine breather from the head, I found that there are bulk head fittings for boat bilge pumps that should work, but until I can get a 30° silicone bend the alloy pipe, and the 11ty thousand hose clamps, are there for the foreseeable future 4 hose clamps are golden, 6 are grudgingly acceptable, the 8 currently holding it all together is just taking the piss    I've also ordered 60 more retaining wall blocks for the front yard, I mis-gonculated the height that was required to get above the base of the Photinia's (red robin's) that are the hedge behind the front fence, currently it is 2 blocks high, and about 1/2 a block short, so going 3 blocks high will be above the base of the red robin's, and allow some room for mulch
×
×
  • Create New...