Jump to content
SAU Community

Recommended Posts

Hey,

I'm thinking of getting a r33 gts-t non turbo skyline

how much would u think a fairly modded one would cost at lowest, i.e. with a 3" exhaust, bodykit with wing.

i want to know if some would be seen as a rip off or not.

also, would a manual be a lot quicker than an auto r33 non turbo?

Are r33 gts-t non turbo skylines really rare??

cos most of them are turbo that i see posted on the net.

Thanks!!

see yas

Link to comment
https://www.sau.com.au/forums/topic/54533-nissan-r33-gts-non-turbo-skyline/
Share on other sites

mate if your willing to pay more for a modified one then why dont you get a cheap stock gtst turbo model which will chop a non turbo any day

if you buy a non turbo you will wish you had the turbo simple as that

bear in mind your car must returned to stock if you plan to bring one in from japan and complaince it. if you wanna keep the parts then thats between you and your compliance agent if they agree

:D

be better to purchase a turbo skyline; most R33's these days come with the usual mods; ie bov, pod, rims etc... nonturbos look like shit(no offence to anyone on here) and woudl take a fair couple of thousand dollars to get what you want; you can get all this already on a turbo skyline....

just as the others said on here; just check up on carsales.com.au and other sites like that for one.. there are heaps to choose from..

-JL

yeah.. im just saying, the look of a stock non turbo skyline isnt the best sight... no doubt it would look good with some advan 18" and sports kit... but for the price of all that to get a N/A skyline to what he wants, you could buy a turbo skyline, have more power and also look good and sound good :D

-JL

yes a man n/a will be faster than the auto n/a... but if you want pod and all of what you listed, then your going have to save up some dosh; like you want to kit it and lower it etc? well you'll need money for that...

just saying it would of been a cheaper solution(in short term with price, not insurance :D) if you went with a turbo r33...

no doubt it will look sweet... good luck man.. i personally dont like the n/a skylines.. bosted all the way :(

-JL

yeah.. im just saying, the look of a stock non turbo skyline isnt the best sight...

R33 GTS and GTSt, look the same, same body, same interior, same stock body kit, only visible difference AFAIK is the gtst sticker on the back of a gtst and 4 stud wheel hubs on the GTS where GTSt has 5 stud.

im 21 and full comprehensive on my gts25 is 1500, i asked for a quote of a turbo before i bought my car and they said something like 3-3500G's. thats a big difference. this is from just cars.

i love the brakes on the turbo r33. non-turbo brakes looks like honda fwd brakes!

hay man if your not all for power but want looks and a nice note the non turbo is great and full comp is not that bad from just cars "i have one at the moment" and its great.

just telling u i have one for sale with full bodykit,wheels and stero so if you want to i can post some photos if you would like it.

one thing no one knows when crusing that it is not a turbo so unlees your after power the non turbo is a great car to cruise and have fun in

thats just my 2 cents so take what you want.

mate i own a non turbo r33 (couldn't get finance for gtst) but in this day with cops and insurance if al u want is a skyline the an gts will be fine. myne doesn't look bad at all if you want some pics i will send but all the turbos are good for besides use for the track is the sound it makes which in turn attracts more unwanted attention and fines, which i would rather spend on my car haha (talking from experience and lack of money and points) good luck bro

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hi, SteveL Thank you very much for your reply, you seem to be the only person on the net who has come up with a definitive answer for which I am grateful. The "Leak" was more by way of wet bubbles when the pedal was depressed hard by a buddy while trying to gey a decent pedal when bleeding the system having fitted the rebuilt BM50 back in the car, which now makes perfect sense. A bit of a shame having just rebuilt my BM50, I did not touch the proportioning valve side of things, the BM50 was leaking from the primary piston seal and fluid was running down the the Brake booster hence the need to rebuild, I had never noticed any fluid leaking from that hole previously it only started when I refitted it to the car. The brake lines in the photo are "Kunifer" which is a Copper/Nickel alloy brake pipe, but are only the ones I use to bench bleed Master cylinders, they are perfectly legal to use on vehicles here in the UK, however the lines on the car are PVF coated steel. Thanks again for clearing this up for me, a purchase of a new BMC appears to be on the cards, I have been looking at various options in case my BM50 was not repairable and have looked at the HFM BM57 which I understand is manufactured in Australia.  
    • Well the install is officially done. Filled with fluid and bled it today, but didn't get a chance to take it on a test drive. I'll throw some final pics of the lines and whatnot but you can definitely install a DMAX rack in an R33 with pretty minor mods. I think the only other thing I had to do that isn't documented here is grind a bit of the larger banjo fitting to get it to clear since the banjos are grouped much tighter on the DMAX rack. Also the dust boots from a R33 do not fit either fyi, so if you end up doing this install for whatever reason you'll need to grab those too. One caveat with buying the S15 dust boots however is that the clamps are too small to fit on the R33 inner tie rod since they're much thicker so keep the old clamps around. The boots also twist a bit when adjusting toe but it's not a big deal. No issues or leaks so far, steering feels good and it looks like there's a bit more lock now than I had before. Getting an alignment on Saturday so I'll see how it feels then but seems like it'll be good to go       
    • I don't get in here much anymore but I can help you with this.   The hole is a vent (air relief) for the brake proportioning valve, which is built into the master cylinder.    The bad news is that if brake fluid is leaking from that hole then it's getting past the proportioning valve seals.   The really bad news is that no spare parts are available for the proportioning valve either from Nissan or after market.     It's a bit of a PITA getting the proportioning valve out of the master cylinder body anyway but, fortunately, leaks from that area are rare in my experience. BTW, if those are copper (as such) brake lines you should get rid of them.    Bundy (steel) tube is a far better choice (and legal  in Australia - if that's where you are).
×
×
  • Create New...