Jump to content
SAU Community

Recommended Posts

  • Replies 212
  • Created
  • Last Reply

Top Posters In This Topic

Hey guys, was a great day! Big ups to buster for organising the day and for spending all day looking like stone cold steve austin!

In some kind of freak occurrence i actually managed to go from stalling at my first attempt at a burnout to actually producing some half decent kind of smoke show by the end of the day. Other than that it was a bit of a piss poor effort running a pb of 13.1 @ around 105mph, with best mph of 112.9 . Best 60' of the day came from throwing anything and everything we could find in the boot for a 1.8 but it didn't help much, Clutch 1, Luke 0

All in all it was a great day! next time i'll definately bring a suspension & tyre package that has some squat in it unlike the current setup which has about as much chance of squatting as a sumo breaking a high jump record!

umm we wanted to run it as a club event but there were problems with WSID management. Brett organised it and I think all club members knew about it.

Hopefully next time we can make it more widely known :(

2rismo I checked the pis on that site and every second one seemed to be you doing big and then BIGGER burn outs. You going on the 10th as I will have vid with good batteries this time and get a good vid of your burn out for our site?

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • This car has run before on this z32 ecu can get the part number for you, I have tried with no AFM it didn’t change anything, I compression tested today 140-150 across all 6 cylinders, also set fuel pressure to 43psi. The only weird thing was cylinder 1 plug was black and fouled other 5 cylinders were just wet with fuel. Spun cas by hand and confirmed injectors are clicking 
    • Since you came here to ask for help, have you thought about answering our questions, that might help us lead you to why it was skipping, or have you given up on getting advice?
    • A 1.5 way is a 2 way. It is just a 2 way with a less aggressive ramp on overrun.
    • The ABS and/or TCS being missing/broken will not cause the engine to misbehave. It just casues CEL to come on and annoy you. The CEL is useless if it is always on, so you have to do the things you have to do to get rid of it, so it can be useful. Being a Stag ECU, then yes, it will not expect TCS to be present. But it will expect ABS to be present and working. You will need to either make the ABS CU talk to the ECU (don't ask me what that will take on an NA R34), and make sure the hardware is working....or, you just need to blank it out in Nistune. Do not persist with the stock ECU. You will just have problems. Gte it Nistuned. Start from there. DO YOU HAVE A BOOST SENSOR? The ECU's boost sensor that it. It is connected to the loom at the rear of the coil cover. Usually rides on the firewall on an R34, but is usually bolted down to a bracket along with all the other crap at the back of the coil cover when a Neo is dropped into another car. If you do not have it, the ECU will shit the bed. So, do you have one?
    • So sadly the fuel pump etc was not it. The pump and filter is new and it is still cutting around 4000 rpm. A read something about ABS/TCS (engine is from stagea and ECU too so no TCS) and i dont know for 100% that my car has ABS. It has ABS "cube" in engine bay but i dont think it works(or at least from my braking experience). Can be something like that?  I will be driving the car next week to Nistune tuner to properly see what is wrong...  
×
×
  • Create New...