Jump to content
SAU Community

Recommended Posts

just curious to see if your experiences are anything like mine.

As far as I can remember, I've driven 3:

1. Suzuki Wagon R (fairly new one) - drove perfectly normal - absolutely nothing special, but perfectly putt-able around town. Pedal handbrake was a bit wierd though. In hindsight, I think the fact that it was an auto made a big difference (maybe)

2. Honda Beat (about 91 I think) - pretty horrible in 1st gear, not much better in second. Had a typical honda rev-ability. Power is a relative concept, but I really was disappointed (and I wasn't expecting a lot). Only drove it for a couple of minutes - but I could sense that it would be a fun cornering car.

3. Last night's effort... this:

1993_14.jpg

early 90s mitsu toppo.

Oh my god!

Redefined "light clutch" - almost wasn't there. Nearly put my foot through the floor every gearchange. Absolutely unbelievable (not in a good way) gearing - I was doing 35-40km/h and needed to shift into 5th :bahaha:

what is your opinion on the world of kei?

Link to comment
https://www.sau.com.au/forums/topic/54825-who-has-driven-a-kei-car/
Share on other sites

I have and I have also driven that same toppo too ;)

The toppo I drove was in bright purple paint, was my alarm installers work car and had every alarm brand sticker across the rear window...only time I felt like a ricer. It was an auto and they seem to have good power IMO. Near the workshop (Shin-Osaka) there are alot of hills, I managed to get a good 20-30cm air over the crest hehehe...they are so dam light and chuckable.

Was the one you tested a turbo version, not that it makes much of a difference?

I have also driven two kei trucks from Honda :rofl:

oh and a kei work van...Sambar something.

I have a suzi cappuccino as one of the day cars.. quite sensitive on the bumps with standard suspensions, not that great with straight line speed. Absolute fun when it comes to corners, it'll hug the corners at silly speed as long as the road isn't bumpy. Oversteer situation can be quite hairy for such short wheelbased thing...

just need some more powah! ;)

The first school I worked at here had several branches throughout Yamanashi. To get to these branches the school provided what I would loosely call "company cars". More like junk heaps with wheels. Take 6 kei cars, old ones, abuse the hell out of them, wash them but once a year, fill them with garbage (mainly McDonalds paper cups and bags) and you kinda get the idea.

Then there was the Toyota corsa that to everyones amazement ran for over 6 months with the oil light on permanently and never died! When I finally convinced the management it needed some fresh oil, the mechanic at the service station noticed there was not a single drop of oil in it...but I digress.

Yeah - their compliment of cars included:

A *cough* pink *cough* Honda Today Pochette Auto. Need I say more.

2 white Daihatsu Mira's (one with a door frame that was falling off - so much so that when one staff member accidently locked the keys in the car, all I had to do was bend it a little and reach in!

The other had a fcuked starter motor and a permanently flat battery. That wasn't too much of an issue for one of my colleagues though - he just left the thing running in the carpark during classes - sometimes for upto 3 or 4 hours! It also maxed out at 60 in 4th...

1 white honda minivan - looked like it had been retrieved from a wreckers yard - all rev and no go but great for Gomi Hunting runs...

And a white Mits Minicar manual - with a featherwight clutch. Half the electrics didn't work and they was loud clunking sound coming from the rear end under "acceleration". Top speed about 60 in 4th. Any more and and it sounded like it'll rip itself to pieces!

I have a suzi cappuccino as one of the day cars.. quite sensitive on the bumps with standard suspensions, not that great with straight line speed.  Absolute fun when it comes to corners, it'll hug the corners at silly speed as long as the road isn't bumpy.  Oversteer situation can be quite hairy for such short wheelbased thing...  

just need some more powah! :D

I have one :-)

Despite running a 780cc engine, it sounded bigger than it really was, and the turbo is a lot of fun. Revs like hell too, but it is a slow car especially if you're trying to do the 1/4 in it. Oversteer is crazy, car would need wider wheels and lowered then I think it should be ok. I think it would own on an autoX course.

Heard a few modded Caps that could give a lot of 5 second cars a good run.

Interior is tight, I'm not that tall and I just fit. Its a convertible as well so was a lot of fun driving during summer.

Great car.

I've driven quite a few, mostly loaner cars.

One loaner Suzuki Alto from Autobacs died on me in another Autobacs parking lot, got a free ride in the managers LanEvo III out of it. All the others I didn't have a problem with at all.

For the most part they suprisingly had a lot of pep, they were all little death traps though and I was scared sh!tless to take them above 100. I'd still love to have one as a daily driver though, awsome gas milage and I would love to drive something I don't have to care about and can park anywhere without fear of someone screwing up the paintwork.

I did a 3 car test about 2 years ago. Mitsubishi EK-Sport, Nissan Moco and Daihatsu Copen. All fun little cars to drive, Nissan the better built of the 3 but the less sporty. The EX-Sport was actually pretty damn fast!! Cornered very well for a toaster on wheels. Copen was also pretty cool but I looked like a right idiot driving it. Imagine a 190cm 95kg gaijin driving round in a Copen and you get the idea:D

Been in a Move, manual, the easiest car even driven, u don't need to release nicely to drive it nice!

Also driven a mate's Beat in melbourne, i open the roof when i stop at the red light, and the girl in the car next to me seems very excited and wave at me :) . Fun to drive as it CAN rev but don't expect any power.

had a ride in my friend's Gino, funny "Mini" looking and the rice BLOWOFF sound!

cmn_img_001.jpg

Not quite a Kei but I owned one of the twenty complied Charade GTti's in Australia for a while last year.

Standard 993cc CB70 running standard boost with an exhaust, did 185 easily while driving Brisbane-Adelaide, did a 16.7@85mph at AIR when driven off the line granny style. T'was fun

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hi, is the HKS  Tower Bar still available ? negotiable ? 🤔
    • From there, it is really just test and assemble. Plug the adapter cables from the unit into the back of the screen, then the other side to the car harness. Don't forget all the other plugs too! Run the cables behind the unit and screw it back into place (4 screws) and you should now have 3 cables to run from the top screen to the android unit. I ran them along the DS of the other AV units in the gap between their backets and the console, and used some corrugated tubing on the sharp edges of the bracket so the wires were safe. Plug the centre console and lower screen in temporarily and turn the car to ACC, the AV should fire up as normal. Hold the back button for 3 sec and Android should appear on the top screen. You need to set the input to Aux for audio (more on that later). I put the unit under the AC duct in the centre console, with the wifi antenna on top of the AC duct near the shifter, the bluetooth antenna on the AC duct under the centre console The GPS unit on top of the DS to AC duct; they all seem to work OK there are are out of the way. Neat cable routing is a pain. For the drive recorder I mounted it near the rear view mirror and run the cable in the headlining, across the a pillar and then down the inside of the a pillar seal to the DS lower dash. From there it goes across and to one USB input for the unit. The second USB input is attached to the ECUtec OBD dongle and the 3rd goes to the USB bulkhead connected I added in the centre console. This is how the centre console looks "tidied" up Note I didn't install the provided speaker, didn't use the 2.5mm IPod in line or the piggyback loom for the Ipod or change any DIP switches; they seem to only be required if you need to use the Ipod input rather than the AUX input. That's it, install done, I'll follow up with a separate post on how the unit works, but in summary it retains all factory functions and inputs (so I still use my phone to the car for calls), reverse still works like factory etc.
    • Place the new daughterboard in the case and mount it using the 3 small black rivets provided, and reconnect the 3 factory ribbon cables to the new board Then, use the 3 piggyback cables from the daughterboard into the factory board on top (there are stand offs in the case to keep them apart. and remember to reconnect the antenna and rear cover fan wires. 1 screw to hold the motherboard in place. Before closing the case, make a hole in the sticker covering a hole in the case and run the cable for the android unit into the plug there. The video forgot this step, so did I, so will you probably. Then redo the 4 screws on back, 2 each top and bottom, 3 each side and put the 2 brackets back on.....all ready to go and not that tricky really.      
    • Onto the android unit. You need to remove the top screen because there is a daughterboard to put inside the case. Each side vent pops out from clips; start at the bottom and carefully remove upwards (use a trim remover tool to avoid breaking anything). Then the lower screen and controls come out, 4 screws, a couple of clips (including 3 flimsy ones at the top) and 3 plugs on the rear. Then the upper screen, 4 screws and a bunch of plugs and she is out. From there, remove the mounting brackets (2 screws each), 4 screws on the rear, 2 screws top and bottom and 3 screws holding in the small plates on each side. When you remove the back cover (tight fit), watch out for the power cable for the fan, I removed it so I could put the back aside. The mainboard is held in by 1 screw in the middle, 1 aerial at the top and 3 ribbon cables. If you've ever done any laptop stuff the ribbon cables are OK to work with, just pop up the retainer and they slide out. If you are not familiar just grab a 12 year old from an iphone factory, they will know how it works The case should now look like this:
    • Switching the console was tricky. First there were 6 screws to remove, and also the little adapter loom and its screws had to come out. Also don't forget to remove the 2 screws holding the central locking receiver. Then there are 4 clips on either side....these were very tight in this case and needed careful persuading with a long flat screw driver....some force required but not enough to break them...this was probably the fiddliest part of the whole job. In my case I needed both the wiring loom and the central locking receiver module to swap across to the new one. That was it for the console, so "assembly is the reverse of disassembly"
×
×
  • Create New...