Jump to content
SAU Community

track/drift day saturday January 15th $150bux


Recommended Posts

well i have been at oran park to watch a race once (like 4 years ago) and the corner coming onto the striaght has a well used wall that has stuck in my mind..

btw 4doorGTR im the guy from wsid with the red gtst you said hi when i turned up so hi its me :D

  • Replies 372
  • Created
  • Last Reply

Top Posters In This Topic

for ****'s sake

me and mate been workin on our 31s sionce morning to get em ready

bled brakes etc

we just finished chucking new nultec bushes in upper and lower controilk arms for mine

then go to change the unijoint coz mine is cactus

and what do ya know

pepsauto sold me the wrong ****ing one

after i made em check 3 times!!!

its bigger than the noraml r31 uni (rear)

****ing hell

no go on the car

All ready to go.

If anyone has a decent trolly jack it would be good. Mine is only a cheapo, but I have the compressor, rattle gun and tyre inflator ready.

Cya in the morning.....one more sleep:wassup:

Pete,

Thank you for a AWSOME day's driving.

It was well managed and pleanty of track time for all.

I missed saying goodby as you were sending more tyres to the smoke gods, but I wanted to T H A N K S

Mal

Owwch!  So how did these crashes occur?

There were two incidents..

1. The first stack was the wrx. It was in his first run of the day in the first "track session". He hit the wall coming in onto the straight. Check out the front drivers side wheel and the scrapes all the way down the side. I noticed he also smashed the side windows.... nasty!!!

2. The second crash was between two cars in one of the "drift sessions". Basically the ass end of one car ended up in the front of another. It was on turn 2 on the south circuit. I guess thats drifting...

Bring on the next day....

I didn't have such a great day ,,,but hey I got to catch up with all you drop kicks which made my pain easier. It pleased me greatly to see Dan get on pace so quickly. 1st session buddy you were on it. I was also pleased to see the counrty boy hold out that crapy Mini,,,well done mate.

All in All I think SAU had a great day.

Thank Fatz.

P.S. I'M PISSED

Neil.

Pete,

Thank you for a AWSOME day's driving.

It was well managed and pleanty of track time for all.

I missed saying goodby as you were sending more tyres to the smoke gods, but I wanted to T H A N K S

Mal

Wanted to say thanks for a great day also! and mall thanks for letting me use your compressor!!!

also why the blanked out number plates? just in case big brother was watching????




  • Similar Content

  • Latest Posts

    • ok so if i wanted to go 18's i would go for 8's  in front 30+ or 32+ off set at front and the back 9 would be ok? what offset should i aim for.. then can i do some  hunting for wheel rim choices..    If i get this - will this fit all around: Size: 18 x 8.5 +37 - n what tyres size tyre should i get for front n back?  
    • Absolute f*cking nightmare. I had to take breaks constantly, and I was always pissed off when I got home. The line split in Italy on day 2 (we drove from the Netherlands), lol. Driving any narrow European town was... well, sh*t.   Appreciate it man. Here, I'll just drop a favourite from the load I took on Saturday.   I'll update here when things happen with the car, the thing is, with stock power and almost everything chassis-wise taken care of, there really are no problems. 268,000kms now and counting.  
    • Ah! I actually managed to snag a lightly used set.... that aren't so suitable for me right now. They don't work on a GTT without some cutting or creative heat moulding. I thought about reselling them myself cause I didn't want to murder them, but it looks like I'm probably going to attempt to murder them/melt them because I may as well. @GTSBoy @PranK can somebody close this thread?
    • Hey mate,  I have a set, one is slightly damaged but wont be noticable once installed.  Shoot me a message if your still after them 
    • I couldn't wait But, the black constant tension hose clamps were too thick and there wasn't enough clearance at the T/B and I couldn't get it to seat properly, so I had use a silver one there I also added some 3" silicone over the alloy bit that goes through to hole on the radiator support as it looked like it was sitting on the edge of the hole in the radiator support, I never noticed a rattle or anything, but there was a witness mark It is basicly done, and I can live with the silver hose clamp at the T/B, I will get a black clamp for the head vent though where it is attached to the bulkhead fitting  It never stops...LOL, only issue now with the shock tower brace is it slightly touches the under bonnet liner now, if I leave it it will either wear some paint off the brace where it touches, or damage the liner, so I removed the liner to see what I have to work with, with the liner removed I have about 20mm of clearance, but sadly the middle part of the underside of the bonnet is only dusted with paint and looks crap, so I cannot have that, but.... as I have a roll of Carbuilders premium under bonnet insulation in the garage laying around that is only 5.5mm thick (we were going to use it on the boys Patrol, but he crashed the front of it a few months and it was written off, hence why he now drives my old Honda Accord Euro), I'll use the OEM liner as a template and get the Carbuilders stuff fitted up to cover that dusted paint up
×
×
  • Create New...