Jump to content
SAU Community

Recommended Posts

i actually dont like red cars all that much, but i have to admit, that car is the only exception. i really like that colour coz its so different. nice work mate. btw i am looking at importing a gtst, and was wondering if it would be worth it price-wise.

seeing as though ur importing that baby, do u think u could pm me with details about import laws etc? cheers mate

bOOSt, yeah the colour changes quite a bit in different light I must admit.

tdawg watch out for fading though especially the rear plastic tail lights and spoiler - something about red cars that love fading

When I first got the car and took it to work, one of the girls said to me "love that colour, I would do you in that colour car!!!!' - so good luck

Have only seen 2 or 3 others around Perth the same colour

Cheers, Al

Hi guys. I once read a reknowned motoring writer who said that cars should be only black, white or red (and that's fire engine red!). I reckoned this could be modified a little, especially for sports cars. I would add silver and, perhaps for a Ferrari, yellow to that list (not sure about the yellow - especially if it's YELLOW!!).

Having said that, the plum purple Skylines look awesome.

And a good British Racing Green is nearly black anyway.

I have owned three red cars - and chose them that way. Hell, look at the Nismo 400R. Looks pretty cool to me.

Cheers.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Depending on how long the car sat it is very possible for injectors to be stuck open or closed, I'd get them cleaned and flow tested. Other than that, obviously when the loom changes and the car doesn't start any more....the loom is suspect so some tracing / comparing may be required
    • Harness is for a s1 Rb25det, and it is engine and lower harness.  the old harness had broken off plugs and was in very rough condition/exposed wires and splices etc. it is not able to be put back on the car, I could visually inspect to see if they had rewired any pins on the ecu plug. The fuel pump definitly isn’t turning off it’s an external pump and very loud you can hear it. Will look at the other harness tonight, am also going to pull the fuel rail and watch the injectors spray, will update here with what I find. Pretty sure at this point it has to be something to do with injectors because car will fire up on starting fluid and cas is clicking the Injectors. Fuel pressure is steady 43psi 
    • Check the injectors flow evenly, and are actually flowing what you and the ECU think they should be flowing. If it's starting up on starter fluid, you have a fuel issue. Is it possible under cranking your fuel pump is turning off?   The harness you replaced, is that the whole engine harness? Do yourself a test, and drop the old harness on and plug it into the Z32 ECU. It's possible they've wired things different. From memory S1 to S2 is different in RB25 and you may have a wrong loom
    • I haven’t pulled the injectors to watch them spray yet but they are clicking from the cas and all of the spark plugs are wet with fuel. I’ve thought the cylinders were being flooded from the beginning and was hoping fuel pressure would fix it. Tonight I am going to pull the rail and watch the injectors spray. Don’t know how to test/diagnose if the plugs are firing in correct sequence but that should be a timing thing and as far as timing goes my car still has the half moon for the cas can only install it 1 way. And my mechanical timing is 100% correct I posted photos above. Confirmed with the balancer on and off. 
×
×
  • Create New...