Jump to content
SAU Community

Recommended Posts

Hey guys,

I've got a question.

Barring all monetary and budgetary restraints, what would be the ultimate turbo for the RB25DET.

Not for ultimate power, as we all know you could just strap a monster to the side of it and make power from 6500 - 8000 rpm.

I'm especially interested in you tuners points of view, STT and SK.

Highest average output, best spooling etc. etc.

Interested to see answers.

BASS OUT

Link to comment
https://www.sau.com.au/forums/topic/55255-the-ultimate-turbo-for-your-rb25det/
Share on other sites

  • Replies 85
  • Created
  • Last Reply

Top Posters In This Topic

Bass, just comes down to how much power you want out of your engine... just look for the quickest spooling turbo which can get you the power your after. 3037's will get you nice power but is it worth sacrificing it for better response?? its up to you

Bass Junky, it might help if you were to give an approximate rwkw figure.

I would have thought 250-300 rwkw is enough, as I have not seen anyone with more than this get it down smoothly on a street car (but I may be wrong) IMHO over 300 rwkw is 4 wheel drive territory unless you are into lots of wheel spin and chewing up tyres.

I also realise that the shape of the power curve will allow cars with less power to light up, but a properly tuned (smooth and progressive power curve) motor with this sort of power should be drivable on the street.

Probably a nice low mount GT2540. Good response, minimal lag, and nice and stealthy low mounted. :)

You gotta be kidding, the 2540 is one mismatched comp/exhaust side turbo ever.

Bass

For an example at sandown on that sunday running around 255rwkw with my GT30 0.70 a/r comp 0.87 a/r exh i found that coming onto either the front or back straights at around 60 km/h in 3rd at around 3000rpm i had lag issues till i hit just over 4000rpm and came onto boost. If i took these 2 corners in 2nd instead i found that i would get wheel spin and axle tramp instead. I went for a ride in skylinegeoffs car before that and he could use 3rd coming onto those straights with his 'hydrid' turbo and come on boost straight away, but my car felt alot quicker on the straights.

Do you plan on joining the wang soon or just street driving?

I'm with B-Man.

The 2835ProS is an awesome turbo that is just right for the stocker internals.

Excellent response & average power.

To push upwards of 280rwkw od I would either do cams to lower bring the dynamic comp ratio to a safer limit or slap a thicker head gasket in there which effectively also lowers dynamic comp.

Obviously a set of injectors are on the cards.. But thats nothing a set of second hand GTR injectors + a resistor pack can't solve.

So... I would..

2835ProS

Nice FMIC & Exhaust

GTR injectors & Resistor Pack

Fuel pump

PowerFC

Z32 AFM

See how the power is then look at cams to make the motor a little safer and also increase the average power. :D

What do you guys think of the HKS GT-RS, for track use. Rated at 400ps , the hks GT2835 Pro S is rated at 420ps.

Seen it on nengun as a bolt on kit for the RB25det's

http://www.nengun.com/product_info.php?pro...4b067d1b19ad51a

So theres not much more difference between the gtrs and the 2530..And the 2535 is the turbo to go for for decent response excellent mid and good top end for rb25.

Spewing we will have to wait and see what croat can pull out of his hat.I was allready like this turbo is the one for me.What sort of price can the hks 2530 2535 etc be recoed back up for??

:)

With everything else in order, so you get the most out of the turbo in its efficiency range.. probably 2835 Pro or 30xx series

you should choose the best turbo for your intended/current setup, not the best turbo in general for rb25det

or something like that :)

hey peter that turbs doesnt look too bad!

Ide like to see some info on its actuall performance on rb20/5 sr20 etc

building a RB25DET with a TD06-25G, nice laggy turbo with good topend power, and a misfiring system to keep the turbo spooling while I'm off the throttle. The one that I've bought is a metal sleeve thingamajiggy (can't remember the name) so its not steel bearing or ceramic, and can withstand a lil bit more punishment than a standard turbo.

As a standard swap/upgrade for a R33 RB25DET i'd say get a 2530, but I dunno how they react to RB25DET Neo's.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Harness is for a s1 Rb25det, and it is engine and lower harness.  the old harness had broken off plugs and was in very rough condition/exposed wires and splices etc. it is not able to be put back on the car, I could visually inspect to see if they had rewired any pins on the ecu plug. The fuel pump definitly isn’t turning off it’s an external pump and very loud you can hear it. Will look at the other harness tonight, am also going to pull the fuel rail and watch the injectors spray, will update here with what I find. Pretty sure at this point it has to be something to do with injectors because car will fire up on starting fluid and cas is clicking the Injectors. Fuel pressure is steady 43psi 
    • Check the injectors flow evenly, and are actually flowing what you and the ECU think they should be flowing. If it's starting up on starter fluid, you have a fuel issue. Is it possible under cranking your fuel pump is turning off?   The harness you replaced, is that the whole engine harness? Do yourself a test, and drop the old harness on and plug it into the Z32 ECU. It's possible they've wired things different. From memory S1 to S2 is different in RB25 and you may have a wrong loom
    • I haven’t pulled the injectors to watch them spray yet but they are clicking from the cas and all of the spark plugs are wet with fuel. I’ve thought the cylinders were being flooded from the beginning and was hoping fuel pressure would fix it. Tonight I am going to pull the rail and watch the injectors spray. Don’t know how to test/diagnose if the plugs are firing in correct sequence but that should be a timing thing and as far as timing goes my car still has the half moon for the cas can only install it 1 way. And my mechanical timing is 100% correct I posted photos above. Confirmed with the balancer on and off. 
    • I checked spark on all cylinders and they all visually have spark with the plug pulled and grounded, but plug 1 is the only one that fouled. This was a running swap that blew up and was rebuilt by a machine shop, put a new wiring specialties harness and did all gaskets, studs, and bolts while it was out.  compression is 135-150 across all cylinders. Aside from that from my understanding with the z32 ecu and maf the car should start regardless. The wiring for TPS and the dual 02 sensor/ dual knock sensor stuff shouldn’t actually stop the car from starting or even running well, (just slightly rich)  they just give fault codes. Car supposedly is supposed to start as long as you have z32 afm and ecu with the nistune base map and that’s info coming from a well known and trusted tuner who does a lot with SR/RB (Rsenthalpy). After more trouble shooting today where I’m at right now is that the cas is sending signal to the injectors they click while spinning the rotor, Fuel pressure is now set at 43psi, all cylinders have good compression and all of the plugs looked great (just wet with fuel) except for cylinder 1 which was very black (cylinder 1 has 150psi compression). all of the coils generate spark if pulled out and grounded out on the head. On the fuel pump car just pops into the exhaust. On starting fluid car will fire off. Hard to tell if all cylinders are firing off but definitley a couple. sounds like all of them but it’s only for 3-5 seconds hard to tell. 
×
×
  • Create New...