Jump to content
SAU Community

Recommended Posts

From Grepins Thread, posted by SK   regarding the GT2835proS

Hi grepin, I like it, it has....

270 rwkw at 7,300 rpm

277 rwkw at 6,300 rpm

246 rwkw at 5,300 rpm

210 rwkw at 4,300 rpm

That's an average of 251 rwkw over the useable rpm allowing for gearchanges. There are plenty of cars with over 300 rwkw that don't average 251 rwkw.

I think it would be a nice car to drive, fast and progressive.

BTW guys, notice this dyno run was not in Shoot Out Mode, so no ambient air temperature compensation. If it was a 31 degree day, then on a 19 degree day it's gunna make a smidge over 300 rwkw with an average around 270 rwkw.

Wanna guess what the A/F ratios would be then? In my opinion Mick has done a good job, looks to be both safe and powerful, you don't see that everyday.  

As I said at the start, I like it!

Some more info came to light after that original post that may clarify a few things;

HKS 2835 ProS Internal gate, at 1.65 bar. A Greddy Plenum, after market exh manifold (Tillbrooks), and Sard 550cc inj, PFC computer and Q45 throttle body.
I dont run that boost all the time, however with 10% toluene 28 deg day the worst knock was 21

Personally I like to set up my car so that it has its max power whenever I push the throttle down. I don't want to wait to "turn up the boost" and "stick some toluene in it". I want to be able to go fast anytime I like and for as long as want.

With the GCG ball bearing high flow on the R34 GTT we could turn up the boost (it runs 1.3 bar all the time) and stick some TurboMax in it and make another 35 rwkw. That would bring it up to 300 rwkw, but not EVERYDAY, not ALL the TIME, not WHENEVER I want.

That's the big difference to me personally, other people may well be happy with spending an hour or 2 before they can go fast.:rolleyes:

  • Replies 85
  • Created
  • Last Reply

Top Posters In This Topic

in regards to grepin running 1.6bar boost and toluene, wasnt that just during early runs? i thought he had a boost leak and got it sorted, ending up with somewher round 280rwkw at 1.2bar with no toluene?

trust33, im not sure why garret and hks equivalents arent the same, but im sure its been covered somewhere else.

 

Also being that all of these turbos are rated at stock boost 10psi or so.So there will be room for more power.

i dont think they are rated at stock boost. i thought HKS's were rated at 1 bar, which may be true for some of them, but say for the 2835pro, it comes with a 1.2bar actuator, so i guess it'd be rated at 1.2bar.

 

Also being that all of these turbos are rated at stock boost 10psi or so.So there will be room for more power.

These turbos arent rated at stock boost. From the HKS japan site, the HKS GT2530, 2535 and 2540 are rated at 1bar, and the GT2835ProS is rated at 1.2bar.

in regards to grepin running 1.6bar boost and toluene, wasnt that just during early runs? i thought he had a boost leak and got it sorted, ending up with somewher round 270rwkw at 1.3bar with no toluene?

trust33, im not sure why garret and hks equivalents arent the same, but im sure its been covered somewhere else.

Just because ppl call a high flowed VG30 turbo a 3040, mainly because it has a GT30 series cartridge, with a bigger "whatever" compressor, i dont think you are really comparing a real GT30 turbo.

Oz is great as we have so many places playing with turbos, i bet i can go to 3 places and get 3 different turbo combinations despite asking for the same setup, thats the downside of so many places doing their own things with turbos:(

And do you really make mpre power running an ext gate????? Perhaps you may get better boost control, perhaps, but surely it comes down to application, boost and power level, and A/R housing you are using more then whether its an internal gate?

im pretty sure you wont see much of a power difference by having the equivalent turbo in external gate configuration over internal... its just another way of bypassing exhaust gasses to control the speed of the compressor wheel, or boost in other words

only difference being that one bypasses it in the exhaust housing of the turbo, where as the other bypasses the gasses out of the manifold before it reaches the turbine, the power difference could only result from how the exhaust gasses are handled in the bypassing process.. whether its more efficient for gasses to bypass through the turbine housing or through an external wastegate is the question, and will of course depend alot i think on how the external wastegate pipe is integrated into the exh. manifold

roy, so is the Garret GT3040 internal gate turbo previously mentioned, that UAS sell, not a real garret GT3040, but a highflowed VG30??

Dont know about the UAS one, but i know from research just before i bought my turbo setup, there was no consistancy between what the various local turbo companies were offering, even though i was asking the same questions to all of them. But they all called them the same thing and claimed very different power levels.

3040 or not, i think B-man ran one of those UAS turbos for a pretty stout/punchy 250rwkws...so thats good damn power:)

Yep - you are correct there Roy.

And now my HKS 3040 does 330 rwkw :spank:

And - it has just been totally reconditioned with new bearing and seals etc. Is back on the car now and will get a tune (again....) after having the HKS 2835 on it ;)

Got to love the number of Turbos I have had on my car - and the number of ECUs.

Let's count them for fun :

Turbos : Stock, GCG Hi Flow, GCG 3040, HKS 3040, HKS 2835

ECUS: Stock, EMS Stinger, Microtech, Power FC

Now I want one of those Jim Berry clutches everyone keeps talking about ;)

:)

Why would you want to do that GTTR34?

 

Buy the HKS2835S for cheaper if thats the case.

What's the price difference? I'm looking for info on the various HKS 2835 models and different options available.

Yep - you are correct there Roy.

 

 And now my HKS 3040 does 330 rwkw :rofl:

 

And - it has just been totally reconditioned with new bearing and seals etc. Is back on the car now and will get a tune (again....) after having the HKS 2835 on it :P

 

 Got to love the number of Turbos I have had on my car - and the number of ECUs.

 

 Let's count them for fun :

 

 Turbos : Stock, GCG Hi Flow, GCG 3040, HKS 3040, HKS 2835

 

 ECUS: Stock, EMS Stinger, Microtech, Power FC

 

Now I want one of those Jim Berry clutches everyone keeps talking about :)

 

 :)

Youve probably posted this already, but what mods did you have with the GCG hiflow and what power did it make?

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • For these last 7 years of ownership, I've always had to use a small scissor jack under one of the front tow hooks to raise the front just enough so my low-profile jack fits under to reach my subframe jack point. I'm beginning to get annoyed of always having to do this. Are there any lower low-profile jacks that fit under the gtr lip on a dropped car?
    • Seat of the pants assessment of the new intake: The car is way less "doughy" when hitting the loud pedal, especially off idle when stopped or in traffic, I did use a cheapo lazer thermal thingo to measure the temp around where the pod filter got its air, it was between 55 - 60°C, in saying this the car was shut off and not moving, so the OEM intake pipe was not supplying any fresh air to where the pod was when the car was at least moving A weird bonus was induction noise on the throttle in the cabin increased a bit,  I was worried that I was actually going to lose some of that induction noise I love so much, outside though, when I got the daughter to do a WOT drive by pass for me, the induction noise has increased alot when on the throttle, not quite ITB doort, but well up there I'm extremely happy with the results and have been exploring the country roads in the region  As for house mods: 1.New front fence is up and is awesome, it really upgraded how the joint looks from the street, and the added security is nice 2. Electricians have replace some interior lights, and with more lighting in the garage, a few new motion detecting lights out the front above the garage, front room, and at the front door, which I have already found heaps helpful coming and going, also now has fancy pants CCTV all round the house The only hold point for power though is the solar and batteries due to supply issues, although this will happen over the next few weeks 3. I have done a heap of landscaping out the front and I'm almost ready to do a new small retaining wall with some nice blocks to replace the brick and cemented in rocks around the raised garden beds cemented in river stone "was the fashion at the time" the house was built. I currently have a pallet of retaining wall blocks and 2 bulka bags of 20mm blue metal to replace the wood chip that is in the raised garden beds around the house 4. I now have 3 big raised garden beds for out the back to grow some vegetables, about 70cm high, 200cm long and 100cm wide 5. My 2 compost bins are already pretty full with brown, green and kitchen waste from the landscaping I'vedone so far, but they will probably take a few months to break down, so anything else that gets chopped, trimmed, and kitchen waste will just start filling the base of the raised garden beds to about 30cm before I start throwing 40cm of good compost, and stuff, for the vegetables to grow in, I'll need a few ton of compost and soil, but the local supplier can sent me bulka bags of the stuff Basically the logs, wood chips and a few strategically placed rocks for drainage, will give the beds some good organic materials down low to break down over time, and they will hold moisture during the warmer months to save the water in my big arse water tank if we don't get alot of rain So, all in all, the car and house mods are going well, and I'm really enjoying being retired, I sleep in too 0700 and slowly plod around inside until I feel like actually doing anything, and only work in the yard for as long as want, which has actually been alot over the last few weeks,  although when you look at it, it seems that not a huge amount of work has been done,  until I look at the before I started the work pics Happy days and good times indeed 
    • hahaha yeah. Plan is to get side skirts and probably just rear pods. But going to do them one-by-one. I've got a set that I really like from RHDJapen, but that one isn't shipped to AU. So need to find someone who can get it for me
    • Here's an idea, answer the questions I asked you as they are trying to work out WHY the LSD will be binding up in a straight line.
×
×
  • Create New...