Jump to content
SAU Community

Recommended Posts

There are no "Specs" available for a Cefiro, closet would have to be S13 Silvia. I know they are listed on most machines as I just had mine done.

Like too_much_boost said, post up your itemised bill if you have one, $700 sounds reasonable though.

  • Replies 199
  • Created
  • Last Reply

Top Posters In This Topic

wtf specs for a wheel alignment? very strange? unless you specify something they will generally even up the camber if possible, set toe to neutral or in a little if you are running a lot of camber to reduce tyre wear.

Final bill was actually $635 - they must have seen me and felt sorry for me and charged me less :) I think that's quite reasonable.

They did a great looking job which I'm very pleased with - only thing is I have an unidentified white powder on the catch can (too much partying from the engine bay?) and a helluva lotta spray dirt/mud inside the engine bay (between the engine and fan belt kinda area) which I don't remember having when I brought the car in.

Probably just dirt from the car sitting around while they were water hosing their garage - I hope :)

I'm disappointed with the "no specs" thing, whatever that is, it's not exactly a stock car but they said it's not in the computer? I told em use the specs for the silvia cos it should be the same they said no prob come back next week for $80 << that seems like a bloody good price if they're doing toe/camber/caster/the works which pedders wanted (i think) $120 for. So I think I'll go back next week with my settings. I'd really love to have all my settings written down so I can just say this is what I want for sure - anyone care to suggest some numbers for toe/camber/caster etc?

Apperantly they said I should also get me one of these things as with the rear camber kit installed my rear wheels sits 'out' a little bit-

rear_thing.jpg

The rear feels ... different with the pineapples and camber kit installed (mostly probably down to the pineapples). The new plugs seem to make it run nicer too - MUCH nicer. I like it so far but won't be able to see it in action till it's registered.

While I was there a guy with a GTR was getting a twin zorst system installed and I noticed he had a nice kakimoto muffler... I told them I'd like to purchase from him to fit on my car - which should make a little less loud without making it crap on open throttle. fingers crossed on that one :cheers:

Next installment: Engineering certificate ;)

Hey, If it's a older cefiro w/ a zenki harness you might want to check the ground to the back of the alternator. Another thing is there is a fuse in the engine bay, marked "main" you might want to check that. When the ground broke off on the back of mine, it blew just about all of my fuses, and melted a few relays. Did a check light (looks like high beams backwards) come on right before it caught fire?

Got my wheels aligned yesterday and got a before and after sheet of the settings. Thought it'd be good for a laugh-

Before

Camber L -4.11 R -3.07

Caster L 6.34 R 6.50

Toe L 7 R 7

Rear Camber L -4.04 R -3.22

Rear Toe L 6.0 R 6.0

After

Camber L -1.32 R -1.26

Caster L 7.33 R 6.52

Toe L -.05 R -.05

Rear Camber L -0.57 R -1.00

Rear Toe L 1.1 R 1.1

Question - after they've set it up why did they set up each side slightly different?

Car feels very different now. Better overall at mid speeds but in slowish (2nd gear) tight corners the car kinda bumps through the corner, keeping the grip like crazy but bumping through it... I'm not sure if performance wise it's the quickest way through the corner but it feels tough :)

I will have to "test" properly at a track - which I can only get to when the car is registered. Still. Feels alot nicer now.

Yeah it is mechanical and yeah it's very tight so tight corners it skips HEAPS... whole car lunges up almost.. It just wasn't noticable before the alignment as much because the car felt like it sat more on the front wheels (with 4 degrees neg camber it makes sense).

Now when I go round the same corner it's not like the rear "slinks" after the front as much, it's more like the front falls into line where I want it to go and the rear half slinks and half bumps into place.

Might be the combination of wheel alignment and pineapples :)

My only thing is the garage said it's a 'sealed diff' and they can't change the oil :

When I get it engineered and rego'ed I'll be able to "test" more.

Well with rego out the next step in engineering will be getting documents from meggala for proof of purchase which he is sending tommorow woot!!

Armed with that I should be able to get through engineering next week and hopefully without any major hurdles there :

Finally someone said what I was thinking. *sigh* why oh why can't I ever seem to find a decent garage!?

It would be extremely unusual to have a diff whose oil can't be changed :) However, the easiest way to check is to stick your head under the car and look for a drain plug on the (rear, I assume) diff. If its in the standards R200 enclosure as per a lot of Nissans, it should be dead obvious.

LW.

  • 4 weeks later...

Was taking my car for a run yesterday (to keep it running nicely) and when I pulled it out of 3rd to put into 4th.. well.. something felt very very bad.

I had a hard time pulling it out and now 4th feels very squishy, and while it stays in there and seems to be putting power to the ground but it feels very very wrong (squishy/soft/no defined clicking in). I can push it out from 4th with no clutch at any rev quite easily too.

lol

Funny thing is silver my car is running better than ever.

It's the most reliable it's ever been, the cleanest and the best setup.

All I need now is engineering, blue slip, pink slip and I'm laughin.. my 4th gear is behavin now. So after that I'll try to reco the gearbox and that's it.

It's just that to get this far it's cost me too much and I've run out of cash for engineering+rego lol

weel good luck with it, lets hope soon we'll get to see it doing what it was built for

Funny thing is silver my car is running better than ever.

It's the most reliable it's ever been, the cleanest and the best setup.

All I need now is engineering, blue slip, pink slip and I'm laughin.. my 4th gear is behavin now. So after that I'll try to reco the gearbox and that's it.

It's just that to get this far it's cost me too much and I've run out of cash for engineering+rego lol

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Cheers. Skyline is back on the menu, can’t get rid of it. It’s like a child you don’t want, or herpes 
    • I got back to Japan in January and was keen to get back on track as quickly as possible. Europe is god-awful for track accessibility (by comparison), so I picked up a first-gen GT86 in December just to have something I could jump into right away. The Skyline came over in a container this time and landed in early January. It was a bit battered after Europe, though—I refused to do anything beyond essential upkeep while it was over there. The clutch master cylinder gave out, and so did the power steering. I didn’t even bother changing the oil; it was the same stuff that went in just before I left Japan the first time. Naughty. Power steering parts would’ve cost double with shipping and taxes, so knowing I’d be heading back to Japan, I just postponed it and powered through the arm workout. It took a solid three months to get the car back on the road. Registration was a nightmare this time around. There were a bunch of BS fees to navigate, and sourcing parts was a headache. I needed stock seats for shaken, mistakenly blew 34k JPY on some ENR34 seats—which, of course, didn’t fit—then ended up having the car’s technical sheet amended to register it as a two-seater with the Brides. Then there’s the GT86. Amazing car. Does everything I want it to do. Parts are cheap, easy to find, and I don’t care what anyone says—it’s super rewarding to drive. I’ve done a few basic mods: diff ratio, coilovers, discs, pads, seat, etc. It already had a new exhaust manifold and the 180kph limiter removed, so I assume it’s running some kind of map. I’ve just been thrashing it at the track non-stop—mostly Fuji Speedway now, since I need something with higher speed after all that autobahn time. The wheels on the R34 always pissed me off—too big, and it was a nightmare getting tires to fit properly under the arches. So I threw in the towel and bought something that fits better. Looks way cleaner too (at least to me)—less hotboy, less attention-seeking. Still an R34, though. Now for future plans. There are a few things still outstanding with the car. First up, the rear subframe needs an overhaul—that’s priority one. Next, I need to figure out an engine rebuild plan. No timeline yet, but I want to keep it economical—not cutting corners, just not throwing tens of thousands at a mechanic I can barely communicate with. And finally, paint. Plus a bit of tidying up here and there.  
    • Nope, needed to clearance under the bar a little with a heat gun, a 1/2" extension as the "clearancer", and big hammer, I was aware of this from the onset, they fit a 2.0 with this intake no problems, but, the 2.5 is around 15mm taller than a 2.0, so "clearancing" was required  It "just" touched when test fitting, now, I have about 10mm of clearance  You cannot see where it was done, and so far, there's no contact when giving it the beans Happy days
    • It's been a while since I've updated this thread. The last year (and some) has been very hectic. In the second-half of 2024 I took the R34 on a trip through Germany, Italy, France and Switzerland - it was f*cking great. I got a little annoyed with the attention the car was getting around Europe and really didn't drive it that much. I could barely work on the car since I was living in an inner-city apartment (with underground parking). During the trip, the car lost power steering in France - split hose - and I ended up driving around 4,000kms with no power steering.  There were a few Nurburgring trips here and there, but in total the R34 amassed just shy of 7,000kms on European roads. Long story short, I broke up with the reason I was transferred to Europe for and requested to be moved back to Japan. The E90, loved it. It was a sunk cost of around EUR 10,000 and I sold it to a friend for EUR 1,500 just to get rid of it quickly. Trust me, moving countries f*cking sucks and I could not be bothered to be as methodical as I was the first time around.
×
×
  • Create New...