Jump to content
SAU Community

Recommended Posts

v12-001.jpg

v12-002.jpg

v12-005.jpg

Hi everyone,

Thank you for your comments.

Here are a few pictures of the (unfinished) engine.

The chassis is a highly modified R34 chassis.

I don't own any drag track in France as there is no drag track in France at all.

For more informations, please e-mail me at :

[email protected]

I don't own any drag track in France as there is no drag track in France at all.

Hmmmm FastFours or Hot4s or whatever it was might have got it wrong then, because im pretty sure they said a guy owned it who owned the only drag strip in france.

Very nice car anyways, how long has it been in development, what's the Hp & Time goals?

what is the engine sourced from? and also is the car made of a tube chassis (so in other words its liek the proper drag cars) or based on the R34 chassis?

also france seems to have a few drag strips... http://www.francedrag.com... sif you'd believe anything a fourbanger mag tells ya :cheers:

Hmmmm FastFours or Hot4s or whatever it was might have got it wrong then
I'll add them to my growing list of innacurate "near enough is good enough... they'll still buy the mag!" tell-a-few-porkies-for-more-sales crap Aussie enthusaist mags.
I'll add them to my growing list of innacurate "near enough is good enough... they'll still buy the mag!" tell-a-few-porkies-for-more-sales crap Aussie enthusaist mags.

Someone's not feeling the love...

I'll add them to my growing list of innacurate "near enough is good enough... they'll still buy the mag!" tell-a-few-porkies-for-more-sales crap Aussie enthusaist mags.

Just say it Rezz, just say you hate Australia, Just burn everything about it & prove why Japan is so much better, do it man, let it all out, we all know you hate Australia! Lol. j/k m8 with the half truth behind it

Hi everyone,

A few more informations :

The engine comes from a Mercedes Benz 600. It is an all aluminium 48 valves quad cam V12. It has a variable timing on the intake.

It's weight is very close to weight of the RB26 (cast iron block).

It has a Brabus crankshaft which brings the capacity to 6.9 litre

The car is built using a stock R34 shell. Around 50 meters of chromoly tubing has been welded inside. The suspensions mounts are relocated and double wishbone suspensions are used front and rear.

The tyres are 345/40 - 18 front and rear on BBS magnesium wheels.

The engine is located in central front position to make room for the front transmission.

The gearbox is a OS Giken 6 speed sequential.

The car is built like a road race car, not a drag racing car.

About the french dragstrip, unless one has been built last week, there is not a single one in this country. In any case, I don't own it.

There are a few races in France but they are organized on the straight of road race tracks or airfields.

Best regards

Luc-Michel FAICHAUD

don’t believe it...until I see some engine shots and some specs...otherwise their is no point in posting up a outside photo...same as me posting up a photo of my car from the outside and saying a have a 2000hp gtr motor in it...

BET U FEEL A BIT OF A PLANK RIGHT NOW !!!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Brooooo Please send ABS control unit schematic Please! R33 gts25t ABS (Its two plug ecu, black and white) wire colors possible? [email protected]
    • Don't even try to run it on the stock ECU if you're going to have the boost controller bring boost above ~10 psi. I've already told you that. If you use the Nistune ECU, you will need to CAREFULLY read the available documentation for Neo tuning, and read some threads on the Nistune forums, to discover the various things you have to do to prevent the ECU from going bananas when the boost is too high. The is a table associated with th boost sensor that must be modified to prevent it from shitting the bed. This is just one of the things that you will need to do to the tune in Nistune, because the Neo turbo ECU will be expecting to see a number of things (such as the TCS) that are not there, and you have to block the DTCs on those. It is totally not surprising to me that you are having the problems that you are, but the solutions to these problems have been known for >15 years. So just get it done.
    • Hi. Sry iam not a mechanic and iam not at the car atm so i dont know 100% but they told they measure those and even try to change those. AFM they have two. Coils are new a they have my old one too. Plugs too. ECU...we have 25 NEO stock and Nistune 25 NEO.   But i dont know if any one those could be the problem and why/if/what can cause this, Only thing they did not check is fuel...but that walbro 255 is new(like 1,5 years)... That fuel pressure gauge idk...but i let them know Any suggestions?   EDIT: how can they know if it is like you say he ECU pull power when it reaches a specific boost level that is too high? Tha car has boost controler
    • Can you clarify what you mean by boost cut, do you mean it misfires both when under load (driving) and when stationary and out of gear? Or does the ECU pull power when it reaches a specific boost level that is too high (boost control issue)? Does it occur at idle with no throttle? When you say "the ECU is OK", what ECU is it and why do you think it is OK? Have you used the NEO ECU, and if so do you have a MAP sensor attached? Same for the AFM, why do you think it is OK? Do you have any way to put a fuel pressure gauge on it (even just a mechanical one between the fuel filter and fuel rail)?
×
×
  • Create New...