Jump to content
SAU Community

Recommended Posts

My car is fairly standard yet making good power.

MODS:

3" zorst

FMIC (HKS, strange item, both inlet and outlet on same end tank)

Cold air induction + HKS pod

Some sort of chip, as it flies past the rev-limiter and has way too nice of an AFR curve.

standard turbo running around .9-1.0 bar

207.8rwkw with a 13.5@108mph

sorry about dyno size but

edit: peak power is at 7400rpm

GTR Intercooler

HKS Super-dragger, Hi-Flo Cat, HPC coated dump pipe

rb20 wastegate actuator, bleed valve combo for 12psi

stock turbo

iridium sparkies gapped to .8mm

98 RON BP Ultimate

ex cam gear 4 degrees retard

hks pod with cold air partition

Power FC

210RWKW in Shootout Mode - and pulls like a train on boost !!

Picture_14_.JPG

hey guys im new here but thought i might share my powers too.

4dr r33 pumped 251.1 rwkw @ 15psi power run only

power fc

xtr gtst upgrade turbo (pretty suprised how efficient they are)

bosch 600hp pump

highflowed injectors

nismo reg

3'zorst

more tuning needed (expecting 265-270 on same boost and around 280-290 on 18psi although dont know if its wise)

Apexi RX6 550HP Turbo

Apexi Rb25 Forged bottom end kit.

Apexi 260 Degree Cams

Wolf3D Management

393hp@ 14psi

418hp@ 18psi

Boost comes on at 3000 RPM

15psi @ 4200 RPM

18psi @ 4500 RPM

Just tested it last week at Kwinana Motorplex 11.75 @ 122 MPH

Can post up the graph tonight

I'm still trying to sort out some tuning issues but I saw 234 rwkw from my car a couple of days ago.

GCG highflow

CES split dump

Fujitsubo 3" cat back with 2 mufflers for quietness

panel filter in stock air box

480cc Nismo injectors

ROM tune from Powerplay (still to be sorted)

About 12-13 psi at peak power (also have boost controller issues)

just thaught ide add to stock turbo r33 gtsts making over 200rwkw. because i think people need to realize its not as uncommon or amazing as alot of people think.

3in turbo back exaust, high flow cat

std turb 11psi

pod with cai

ex cam gear -3deg

hks type s fmic

std ecu+ safc 2

208.8rwkw and done a 13.4 on its first run at wsid

bottom end rebuild

forged pistons

tomei 256º cams

EBC @ 10psi

SAFC

full 3.5" (stock dump)

stock cooler (Hybrid kit waiting to go on)

stock turbo

NOT in shootout mode 166rwkw

as an example I got 178rwkw before the rebuild with a tired motor, in SO mode

93 R33 GTST

stock turbo @ 12psi

stock ECU, injectors, fuel pump

3" turbo back exhaust w/ cat pipe

Pod with partition and CAI

Hybrid copy FMIC with backyard piping :rofl:

SAFC2

200.9 rwkw

Well I'm still not entirely happy with things and now my transmission is crapping itself.

Anyway here are the dyno sheets.

Mods.

Stock airbox with Nismo panel filter

GCG highflow turbo

CES split dump/front pipe

3" cat

3" Fujitsubo cat back with 2 mufflers

480cc Nismo injectors

Auto - chipped ECU

R34 GTR fuel pump

R34 GTR regulator

around 12psi boost.

My next setup,

engine with less compression

t88-33d @ 1.6bar

custom manifold

hi flowed injectors

msd ignition

microtech

forward facing standard plenum

cooler

bosch fuel pump and reg

The first dyno sheet is in non shoot out mode,

the second is in shoot out mode on 1.3bar and a cracked exhaust manifold.

GTT at Stage1 (exhaust etc)

Trust TD05-18g

14psi

Standard ECU

98RON fuel

Figure is HP at the wheelhubs on a Dynapak

r34dynohp.jpg

Same car with same turbo but FMIC/Inj/Pump/ECU etc

TD05-18g

17.5psi

PowerFC

98 RON fuel

Figure is HP at the wheelhubs on a Dynapak

r34dynomar04bhp.jpg

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Yep that's pretty much what I want to see. Racecars that look and sound like the Group A but with newer tech underneath to make them faster and safer. I'm sure there's enough VK-to-VN commodore, E30 BMWs and Foxbody mustangs shells around to make up a decent number of cars with hopefully a couple of sierras, rx7 and R31s in there too. 
    • Contact Jessestreeter.com/Skevas Racing/JustJap for a new r34 rb gearbox or go a cd00# conversion. No point playing with unknown condition gearboxes.
    • Such a shame places like Amaroo Park have been redeveloped, smaller tracks always make for good racing. Cheers for sharing @PranK there's some good Lakeside video's too. Its so hard with older the cars as parts are so rare and everything was made for a particular chassis at that point in time. Even the V8 Supercar Blueprint era cars are all different between each chassis within a team as they learnt things and made improvements. The COTF cars between each Chassis builder is different too especially motor/oil systems/intakes. The Group A stuff is worth so much too especially chassis with good history. The only way to do it would be composite panels and similar engine drivelines to the original cars. Ford sierra running Focus RS driveline, Commodore running a short stroke LS/LT or a Falcon with coyote and a H Pattern dog box. Could use a standard ecu across all models with a Torque Map and DBW for parity which is not even used in Supercars currently. Hell a TCM is almost a full chassis car these days and the suspension is not even close to standard style in the front running cars.  
    • Dashcams Australia (13/05/25) captured JDMHSE (Vic plate) being a right tosser. 
    • Wish someone would start a racing series for Group A replica cars, a bit like Touring Car Masters but for 1985 onwards and not grandpa's falcon and/or Monaro. I know they race in some historic class but that's for original cars, no replicas allowed.
×
×
  • Create New...