Jump to content
SAU Community

Recommended Posts

My car is fairly standard yet making good power.

MODS:

3" zorst

FMIC (HKS, strange item, both inlet and outlet on same end tank)

Cold air induction + HKS pod

Some sort of chip, as it flies past the rev-limiter and has way too nice of an AFR curve.

standard turbo running around .9-1.0 bar

207.8rwkw with a 13.5@108mph

sorry about dyno size but

edit: peak power is at 7400rpm

GTR Intercooler

HKS Super-dragger, Hi-Flo Cat, HPC coated dump pipe

rb20 wastegate actuator, bleed valve combo for 12psi

stock turbo

iridium sparkies gapped to .8mm

98 RON BP Ultimate

ex cam gear 4 degrees retard

hks pod with cold air partition

Power FC

210RWKW in Shootout Mode - and pulls like a train on boost !!

Picture_14_.JPG

hey guys im new here but thought i might share my powers too.

4dr r33 pumped 251.1 rwkw @ 15psi power run only

power fc

xtr gtst upgrade turbo (pretty suprised how efficient they are)

bosch 600hp pump

highflowed injectors

nismo reg

3'zorst

more tuning needed (expecting 265-270 on same boost and around 280-290 on 18psi although dont know if its wise)

Apexi RX6 550HP Turbo

Apexi Rb25 Forged bottom end kit.

Apexi 260 Degree Cams

Wolf3D Management

393hp@ 14psi

418hp@ 18psi

Boost comes on at 3000 RPM

15psi @ 4200 RPM

18psi @ 4500 RPM

Just tested it last week at Kwinana Motorplex 11.75 @ 122 MPH

Can post up the graph tonight

I'm still trying to sort out some tuning issues but I saw 234 rwkw from my car a couple of days ago.

GCG highflow

CES split dump

Fujitsubo 3" cat back with 2 mufflers for quietness

panel filter in stock air box

480cc Nismo injectors

ROM tune from Powerplay (still to be sorted)

About 12-13 psi at peak power (also have boost controller issues)

just thaught ide add to stock turbo r33 gtsts making over 200rwkw. because i think people need to realize its not as uncommon or amazing as alot of people think.

3in turbo back exaust, high flow cat

std turb 11psi

pod with cai

ex cam gear -3deg

hks type s fmic

std ecu+ safc 2

208.8rwkw and done a 13.4 on its first run at wsid

bottom end rebuild

forged pistons

tomei 256º cams

EBC @ 10psi

SAFC

full 3.5" (stock dump)

stock cooler (Hybrid kit waiting to go on)

stock turbo

NOT in shootout mode 166rwkw

as an example I got 178rwkw before the rebuild with a tired motor, in SO mode

93 R33 GTST

stock turbo @ 12psi

stock ECU, injectors, fuel pump

3" turbo back exhaust w/ cat pipe

Pod with partition and CAI

Hybrid copy FMIC with backyard piping :rofl:

SAFC2

200.9 rwkw

Well I'm still not entirely happy with things and now my transmission is crapping itself.

Anyway here are the dyno sheets.

Mods.

Stock airbox with Nismo panel filter

GCG highflow turbo

CES split dump/front pipe

3" cat

3" Fujitsubo cat back with 2 mufflers

480cc Nismo injectors

Auto - chipped ECU

R34 GTR fuel pump

R34 GTR regulator

around 12psi boost.

My next setup,

engine with less compression

t88-33d @ 1.6bar

custom manifold

hi flowed injectors

msd ignition

microtech

forward facing standard plenum

cooler

bosch fuel pump and reg

The first dyno sheet is in non shoot out mode,

the second is in shoot out mode on 1.3bar and a cracked exhaust manifold.

GTT at Stage1 (exhaust etc)

Trust TD05-18g

14psi

Standard ECU

98RON fuel

Figure is HP at the wheelhubs on a Dynapak

r34dynohp.jpg

Same car with same turbo but FMIC/Inj/Pump/ECU etc

TD05-18g

17.5psi

PowerFC

98 RON fuel

Figure is HP at the wheelhubs on a Dynapak

r34dynomar04bhp.jpg

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Just trying to get my head around this. At 5psi of boost, you turn on your wmi pump, and then you're using a 3000cc injector, to allow flow upto the actual engine, where you have your 6x200cc injectors and a 500cc injector. If the above is correct, what advantage are you obtaining by having the 3000cc injector blocking flow, is this just incase a line breaks between that injector and the motor you can stop flow immediately? Or are the 6x200cc and 500cc less injectors and just spray nozzle?
    • Welcome! New member myself, but I had an R33 back in 2002. Best advice I could give, based on my experience: if you're running the factory turbo, be very conservative with boost. I made the mistake of just fiddling around with the boost controller and cranking the boost for fun, and the end result was my intake pipes popping off frequently from the constant deluge of oil that was being blown into the recirc by the stressed-out turbo, which itself was siphoning oil from the engine and farting it out both sides of its centre bearing (or something to that effect). If I could do it all again, I would have gotten a new turbo and had a tune dialled in professionally and then just left it alone! Funny you mention the metal shavings in the gearbox, as I had the same thing - the probe plug (magnetic drain plug, essentially) would come out caked with shavings. At least it was doing its job. Not sure if that's just sacrificial wear and part of the deal, or if my gearbox was shagged, but I wasn't abusing it. Enjoy the R33 - they're a dying breed, and if they weren't $35k+ on CarSales in Queensland, I might have picked up one of those again, instead of the 370GT I own now (though I'm loving the 370GT, that big 3.7L V6 just hits different).
    • Howdy folks. I owned an R33 back in 2002, which was thoroughly beyond my capacity (financially speaking) to maintain/insure, so we parted ways in 2004. Fast forward 21 years (to literally yesterday, in fact) and I'm now the proud owner of a 2007 V36 370GT. I'm happily surprised by how much power the VQ37VHR makes, compared to the RB25DET, considering the latter is turbocharged. I had planned to add a turbo at some point but I'm on the fence about whether I'll even need it (though I do love the sudden onset of extra torque). Any other 370GT owners around the traps, I'd love to hear about your experiences with this car (good and bad).
    • Perhaps the answer is... more jacks!* *proper jacks must be used.  
    • I NEVER think about using a scissor jack unless there is absolutely no other alternative. f**king things are dangerous, annoying and stupid.
×
×
  • Create New...