Jump to content
SAU Community

Recommended Posts

  • 2 weeks later...

Got two new tryes and an alignment. Alignment my ass....the car's pulling to the left. The guy reckons they can't fix it because it's the way the japanese cars are made (their roads tilt in right, ours tilt out left)...but it wasnt doing it before i got the new tyres.

Any Ideas???

the hicas wont automatically self align....it's just a steering rack like the front, so to do a 4 wheel alignment on it should be the same as any other car. I did the alignment on my car same as i would any other 4 wheel adjustable and it drives fine. toed the rears in 1 and same for the front.

you should be able to let the steering wheel go and the car generaly stay driving straight, depending on the road it may vere (very slightly) in accordance to the camber of the road, but on a highway should go straight.

I dare say wherever you took your car just couldnt be bothered fixing it cause the story given to you shounds like a complete crock

:D

Berin

  • 2 weeks later...
Got two new tryes and an alignment. Alignment my ass....the car's pulling to the left. The guy reckons they can't fix it because it's the way the japanese cars are made (their roads tilt in right, ours tilt out left)...but it wasnt doing it before i got the new tyres.  

Any Ideas???

:wassup: BS :wassup:

Jap cars are right hand drive same as ours. Gutters are on the left, not in the middle of the road. The road cambers to the left so that the water runs into the gutters. Maybe its because they are in the northern hemisphere and the water spins anti clockwise going down the drain. Or is it clockwise :)

PS; find a decent suspension shop and get the caster (front only) and camber + toe checked on all 4 wheels. New tyres show up any small differences, older tyres can cover them up as they wear.

Got two new tryes and an alignment. Alignment my ass....the car's pulling to the left. The guy reckons they can't fix it because it's the way the japanese cars are made (their roads tilt in right, ours tilt out left)...but it wasnt doing it before i got the new tyres.  

Any Ideas???

Let me guess, you went in for the free wheel balance and they told you "those tyres wont take a balance" so you got four new ones and a bodgie wheel allingment to go with. Anyway, as the people above have suggested that is an absolute load of sh1t. Try "spinning wheel tyres" in sydney (if you're in sydney that is) they are quite good. edit: D'oh, just saw that you're in perth, forget SWT then!

Richard

Hey guys

I just got my steering rack changed and the dorky mechanic forgot I got HICAS on the car so he just stick the rack back into the car without making sure the steering is as it was before.

The steering is now at 2 o'clock when the car is going straight,HICAS light goes off the moment the ignition is turn on.

My question is if I were to get it aligned now do I need to pay attention to anything in particular? or a normal alignment job is sufficient? Please help

devo, take it back and get him to pull the steering column from the rack and align it properly, and don't pay him cos he didn't do the job right the first time.

SK as always is correct.

Richard has obviously seen the dodgy buggers at work. I went in to get a quick balance before the last track day at PI and Beau's (the big blue place that's everywhere) tried the same thing...'..but the tread's too thin now (40%) and it will go out of balance at high speed.' Me - 'Have you ever driven on a race track at over 240kmh?' Beau's - 'No, never been on a race track.'

Get the alignment specs from Whitelines website and take them for your alignment so the idiots don't screw it up again.

  • 4 weeks later...
Let me guess, you went in for the free wheel balance and they told you "those tyres wont take a balance" so you got four new ones and a bodgie wheel allingment to go with. Anyway, as the people above have suggested that is an absolute load of sh1t. Try "spinning wheel tyres" in sydney (if you're in sydney that is) they are quite good. edit: D'oh, just saw that you're in perth, forget SWT then!

Richard

It was a hook up with cost price for the tyres and yeah, free alignment and balance. They WERE supposed to look after me. The man 2nd in charge dealt with me and when he found out what the manager quoted me, he was not happy...so i reckon it was a bit of a payback and the alignment wasnt done at all. It was beaurepairs in freo - so stay away.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Yep, the closest base tune available was for the GTT, I went with that and made all the logical changes I could find to convert it to Naturally Aspirated. It will rev fine in Neutral to redline but it will be cutting nearly 50% fuel the whole way.  If I let it tune the fuel map to start with that much less fuel it wont run right and has a hard time applying corrections.  These 50% cuts are with a fuel map already about half of what the GTT tune had.  I was having a whole lot of bogging when applying any throttle but seem to have fixed that for no load situations with very aggressive transient throttle settings. I made the corrections to my injectors with data I found for them online, FBCJC100 flowing 306cc.  I'll have to look to see if I can find the Cam section. I have the Bosch 4.9 from Haltech. My manifold pressure when watching it live is always in -5.9 psi/inHg
    • Hi My Tokico BM50 Brake master cylinder has a leak from the hole between the two outlets (M10x1) for brake pipes, I have attached a photo. Can anyone tell me what that hole is and what has failed to allow brake fluid to escape from it, I have looked on line and asked questions on UK forums but can not find the answer, if anyone can enlighten me I would be most grateful.
    • It will be a software setting. I don't believe many on here ever used AEM. And they're now a discontinued product,that's really hard to find any easy answers on. If it were Link or Haltech, someone would be able to just send you a ECU file though.
    • Yes sir am asking is there possible way from aem tuner from wiring pins 
    • Have you checked cam to crank timing and confirmed balancer marks are correct?
×
×
  • Create New...