Jump to content
SAU Community

Recommended Posts

RB25DET Engine 80,000kms

Loom and ECU

Gearbox and Clutch condition is unknown

Standard Turbo

P/s A/Con and Alternator

Series 1 Headlights

Stock Intercooler

Rear Boot Lid with Spoiler

Rear Bumper Bar

Rear Tail Lights both Sides

Fuel Tank, Fuel pump

A/C core and fan

Washer Bottle

Radiator Support

Rear Differential, Drive Shafts, Rear controls arms

Passenger side Door with window and trim

Front & Rear Disc Brakes and Calipers

Rear Seats and Passenger Side Seat

Apexi R33 Blow Off Valve

17'' Silver Alloy Wheels + BFGoodrich Tyres 80% Tread (Set)

Make an offer for these parts

Dont have any dash interior panels

Do you have the stock intercooler piping, the part i am looking for is a rubber 90degree bend that goes across the chassis joining to the intercooler.

Picture of the part i am looking for

http://www.skylinesaustralia.com/forums/at...achmentid=25820

RB25DET Engine 80,000kms

Loom and ECU

Gearbox and Clutch condition is unknown

Standard Turbo

P/s A/Con and Alternator

Series 1 Headlights

Stock Intercooler

Rear Boot Lid with Spoiler

Rear Bumper Bar

Rear Tail Lights both Sides

Fuel Tank, Fuel pump

A/C core and fan

Washer Bottle

Radiator Support

Rear Differential, Drive Shafts, Rear controls arms

Passenger side Door with window and trim

Front & Rear Disc Brakes and Calipers

Rear Seats and Passenger Side Seat

Apexi R33 Blow Off Valve

17'' Silver Alloy Wheels + BFGoodrich Tyres 80% Tread (Set)

Make an offer for these parts

Dont have any dash interior panels

dude can u please send me pics of the condtion of the headlights? and how much do u want? also is it a s1 or s2 wing? if its a s2 wing and brake light is working wanna just sell that?

I am very interested in your rb25det engine. Do you know if the engine was damaged? if so what? does she click over ok? it looks like it has been pushed alot to the passanger side from the impact.

And most importantly, how much do you want for it?

input shaft would have been owned ..... bellhousing would of cracked and the rear snout of the box would of been smashed as well.

anyways.. how much you want for the turbo? has it been boosted? if u know at all

Matt

Would you happen to have the windscreen wiper, indicator stalk off the steering wheel column.

My car was just broken into, and they've damaged/ snapped that, as well as my dash.

Thanks.

Call me on 0400444913, and I'll get it off you asap.

Guest
This topic is now closed to further replies.


  • Similar Content

  • Latest Posts

    • Ok i will get those 310mm. I found one but on a different site. This is the description on those...is it ok? Technical parameters: - Axle: front. - Disc type: ventilated. - Number of holes: 5. - Disc diameter: 310mm. - Total height with center: 54mm. - Thickness (new/min.): 30/28mm. - Designed for brake calipers manufacturer: Sumitomo.
    • You Gregged a whole racetrack!?
    • Look for broken wire or bad connector at the motor. Might not be it, but is worth starting there, as it is easy.
    • Hi everyone, I’m having an issue with my R32 GT-R. Sometimes, when the car goes over a bump or experiences some vibration, the 4WD warning light comes on the dashboard. When I check the code from the control unit in the trunk, it shows Code 19 – ETS Motor. However, everything seems to be working fine — if I turn off the engine and restart the car, the light goes away and everything functions normally. Has anyone experienced this before? Where should I start troubleshooting this issue? Thanks in advance!
    • I'm back from the dyno - again! I went looking for someone who knew LS's and had a roller dyno, to see how it shaped up compared to everything else and confirm the powerband really is peaking where Mr Mamo says it should. TLDR: The dyno result I got this time definitely had the shape of how it feels on the road and finally 'makes sense'. Also we had a bit more time to play with timing on the dyno, it turns out the common practice in LS is to lower the timing around peak torque and restore it to max after. So given a car was on the dyno and mostly dialled in already, it was time for tweaking. Luis at APS is definitely knowledgable when it came to this and had overlays ready to go and was happy to share. If you map out your cylinder airmass you start seeing graphs that look a LOT like the engine's torque curve. The good thing also is if you map out your timing curve when you're avoiding knock... this curve very much looks like the inverse of the airmass curve. The result? Well it's another 10.7kw/14hp kw from where I drove it in at. Pretty much everywhere, too. As to how much this car actually makes in Hub Dyno numbers, American Dyno numbers, or Mainline dyno numbers, I say I don't know and it's gone up ~25kw since I started tinkering lol. It IS interesting how the shorter ratio gears I have aren't scaled right on this dyno - 6840RPM is 199KMH, not 175KMH. I have also seen other printouts here with cars with less mods at much higher "kmh" for their RPM due Commodores having 3.45's or longer (!) rear diff ratios maxing out 4th gear which is the 1:1 gear on the T56. Does this matter? No, not really. The real answer is go to the strip and see what it traps, but: I guess I should have gone last Sunday...
×
×
  • Create New...