Jump to content
SAU Community

Recommended Posts

Hey guys, i have a r32 1992 gts-t and my HICAS light turns on everytime im on the freeway and after travelling for 20 mins straight on the freeway my HICAS light always turns on. When i have stopped driving and turned off the car and then turn it on again the HICAS light is off again. But when i drive on the freeway for 20 mins or so straight it turns right back on again. But when im just driving around the neighbourhood where im stopping n going it never turns on. You guys know why its doing this? Thanks

Hey mate,

I dont know much about HICAS but here is a bit of info regarding the warning light from my R33 handbook manual;

HICAS WARNING LIGHT

This light will normally show for a few seconds when the ignition is first turned to the ON position and then go out. Should this light remain on , or appear while driving, it may indicate that there is a fault in the SUPER HICAS Electronic control system. In this situation, normal suspension will resume.

I am not 100% sure but I think that you may have to replace the HICAS computer, which I think is located under your parcel tray??

Or you could get a HICAS lock.

Hope this is usefull.

:D

4bella - i got the same problem, well mine is a bit worse. sometimes the rear end starts turning as i'm going straigh so it feels like drifting and then the light comes on and it becomes normal. this is only sometimes. so now i'm driving with the unplugged comp and no problems. :rolleyes:))

i've been looking at it for a while now and no success as yet to fix it.

thanx again for the help today.

I have that problem also: after long drives the light comes on and goes off after I turn the car off. I noticed the problem first started happening when I installed my MOMO steeing wheel but I also got a HKB boss kit that is suited for HICAS cars. In anycase when the light comes on I don't notice any handling dramas.

"If it's brown, drink it down. If it's black send it back"

I have that problem also: after long drives the light comes on and goes off after I turn the car off. I noticed the problem first started happening when I installed my MOMO steeing wheel but I also got a HKB boss kit that is suited for HICAS cars. In anycase when the light comes on I don't notice any handling dramas.

"If it's brown, drink it down. If it's black send it back"

You have got the wrong boss kit.

The boss will have 2 rectangular holes which should match up with 2 locators on the ring at the top of the steering column which is part of your hicas sensor.

This ring is attached to the top of the steering column by 4 screws.

At the 6 o'clock position of the ring there should be a small window which aligns up with the actual sensor in behind the ring. If the window does not line up the hicas will fail. This does not happen until the car is going in a straght line for some distance and then the sensor thinks the car is turning and goes into fail mode and your light will come on. Hope this of some help to you.

If you want me to explain it any further send me an email to [email protected]

I have had the exact same problem,

The HICAS can do this for a number of reasons:

- Not enough power steering fluid

- Wrong Boss Kit

- It may be stuffed

- Need a wheel alignment

Although to my knowledge the most common of all is that the sensor is not set in the hole in the boss kit, or it is in the hole and it just needs to be secured.

There's another reason...

The HICAS positioning sensor behind the steering wheel requires constant input to inform the computer of the steering wheel position. When you turn the steering wheel, the sensor moves with the steering wheel and informs the computer of the front wheel's are turning. The computer then turns the rear wheels according to the angle of the front wheels, and the speed of the vehicle at the time of the turn.

The main problem with freeways is that they don't contain sharp turns, but the sensor requires a substantial amount of input and you don't get that amount of turn input on freeways. This means:

The computer detects foreward motion (speedo).

There is no input due to the small steering movements on freeways.

The computer thinks something's amiss and locks out the rear steering only.

the lockouts are a pain in the butt, but nothing to really worry about. After all, who out there has also intalled a HICAS lockout kit??

if the car has been in a crash from the rear it could have put it out,the hicas angle sensor more than likely is the problem.

there are tests on this site for diagnostics check them out before going crazy and just replacing stuff though

hope to help..

OR your vehicle has been fitted with a Hicas Lock bar........the light will do the same thing if you have a lock bar installed. I suggest fitting one as hicas sucks dogs nuts.

hehehe yeah dogs nuts :D

The wheel angle sensor could be upside down on the boss kit. On the R32 it has Nissan written on it, take the boss off, rotate the wheel angle sensor until the Nissan logo is up the top or the wire connecting the horn is at about 2:00 and re-fit the boss. Also helps to wrap some slightly thicker rubber around the large prong on the wheel angle sensor to ensure it has a tight fit against the boss.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • So, I started this repair and got as far as "fixing" the holes with some fibreglass. God all those years working on boats came back quickly. I decided I'd reach out to some rust guys just to see what they would say about it. I came across a guy about 40 mins away and went to see him. He said the windscreen needs to come out, that there might be some more bits around the windscreen and he'd quote them at the time. But his quote was $300 to remove and replace windscreen and $3k for the damage he can see. He said he could respray the roof for $1200 and the bonnet for another $800 (somebody has previously rattle canned it, its horrendous). This is $5300 + any small additional bits. It's a lot, I get that and the name of one of my fave youtube channels 'Not Economically Viable' comes to mind.  I'm not being financially rational, but I've taken him up on the quote. He's opening a new shop in November with more room, so we're waiting for that. I'll leave the currently missing headliner out until then. I'm looking forward to it being fixed and having the paint looking nice again (lots of clear coat issues on the roof too). / flame suit on.
    • Oh and some up-and-comings; New rear drivers wheel bearing. I'll do that this weekend while the diff is out. The car is already up and the d/c axles and missing exhaust will help with space. This is the last bearing for me to do and I've been dragging my feet on it. I also have some new EBC blue stuff pads for the car and some new brake fluid. I haven't ever flushed the fluid in this car and looking forward to it. I have 600 degree fluid to put in. Not exactly "race fluid" but better than the typical stuff I have been using.
    • A proper clutch/plate type mechanical diff with quite a lot of pre-load and high locking % is better for drifting. Much more consistent in its behaviour. A helical can be annoyingly vague and inconsistent in how it responds under the sorts of abuse found in drifting.
    • Some updates here. I pulled the entire interior out, minus some trim to respray the seats with Colourlock dye. It turned out really nice though I accidentally let the dog in the car after and she scratched up the front seat.  This is what it looked like before, the colour was just washing out everywhere but thankfully the leather was in good nic. Then after the respray   And after the bloody dog jumped in The headliner is out waiting to be retrimmed, but it will stay out now until Nov - see why below. I replaced the stereo/headunit with a period-styled Android headunit. I have no after pics, but I'll get some. This is because of the missing pixels. I tried to fix this twice with replacement ribbon cables but couldn't. Also the bluetooth interface I'd bought for this was crap. Then there's the rusty roof. Pics and info in this other thread. I have decided to get this repaired professionally, but I'll update that thread. This is why the headliner will stay out for now. I'll be getting the roof and bonnet resprayed at the same time the rust is fixed. I also had an interesting issue with my drivers door lock.  For a small period I was having issues getting any 12v power to the car - I mean *any*. It would have no dash lights, nothing. It happened while I was at the shops and I couldn't get in the car. So, we had 2 problems. The most pressing here is that I was locked out. I have only a single physical key hole on the car, the drivers door and no amount of turning would unlock the car. Surely it doesn't need power for this? The second issue is why am I losing all power periodically, The battery isn't dead, its almost like the battery isn't even there. Two issues that were surprisingly easy to fix. You fellow BMW over-engineering lovers will appreciate this. The lock in the door has 5 states; mechanical lock, electric lock, neutral, electric unlock, mechanical unlock achieved at -90 degrees, -45 degrees, 0 degrees, 45 degrees and 90 degrees. Although, the unlock is towards the front of the car, so opposite for LHD countries. Sticking the key in and turning 45 left or right is what is used 99% of the time. It activates the central locking etc. 90 degrees is for dead battery access and, obvs, only un/locks the one door. But because the mechanical lock is never used and is 27 years old, it seizes up. I was totally unable to turn the key far enough to get to the mechanical unlock (At the time of locking myself out, I didn't even know this was a thing). I eventually did it with some vicegrips and teflon spray.  I made a quick vid for other E39 peeps.   The battery issue is totally new to me also - It wasn't making sufficient contact between the post and the terminal. The terminal was bolted on tight, but the car wouldn't have power. After checking the battery with my multimeter I accidentally contacted the terminal and the battery post and the car got power. The battery was only a few years old and in good condition. I cleaned the post and the terminal with a wire brush, bolted it back on tight and never had the issue again. I'm still surprised that despite having solid contact it didn't work. Also, the car was getting Warragamba sized pools of water in the back when it rained. My initial concern was another rust problem. But when I went out on Weds while it was raining and while I had no headliner in I could see a steady stream of water coming through the roof mounted aerial. As this aerial is for the (now removed) car phone I pulled it out and whacked a blanking grommet in the hole. It seems fine now. I'm thinking I might get the hole permanently filled when the rust is fixed. Moving forward and things in progress; The tailgate needs some attention. I have taken all the trim off to clean it all and address some small rust spots. I have partially done all of this but I'll finish it up hopefully this weekend. As all the trim are now entirely devoid of trim clips I have bought a heap of strong velcro and I'm hoping it does a good enough job as any of this trim in good condition is super expensive and usually in Europe as we dont have many of the wagons here. Suspension and brakes!!! This is exciting. In the front; New control arms New sway bar links New lower Eibach springs (the only modification I'm planning on this car) M Sport shocks (these came with the car and will replace the longer shocks in the car) New top mounts Used 540i calipers (stock brakes suck!) New 540i disks and pads (22x296 mm for 528 and 30x334 mm for 540i) New front wheel bearings (thank all that is holy for bolt on bearings!) Annnnd in the back; New control arms New sway bar links Adjustable air suspension arms (fool the car into what the current height is so the self levelling suspension can match the new front ride height) New ball joints I'll also be doing a brake fluid flush while I'm in there. I'm planning on switching the car over to the 16's that came with it so I can clean up and respray the M Sport 17's. They've lost a lot of colour over the years and have some gutter rash. None of this will start until the E90 is back.
    • You mean you will regret it for drifting duties? I don't quite follow.
×
×
  • Create New...