Jump to content
SAU Community

Recommended Posts

Decided to finally sell my car. Bit the bullet and I'm looking to buy a gtr with 2530's or n1's.

It a grey late 92 gtst type M with an rb26 fitted. Bit of a sleeper. Drags off commodores and falcons with the dirt bike on the trailer.

I'll try and get the car registerd with the 26 next week but if that doesn't work I'll put the 20 back in.

Mods:

RB26dett with good compression around 160psi all cylinders

R33gtr turbos

2 1/2 inch front pipes into 3 inch then into a 2 3/4 inch trust exhaust (very very quiet, cops never ever pull me over)

Mines CPU with suprisingly good timing and fuel maps for oz fuel

Adjustable cam gears

Tube and fin fmic 600x300x76

daiken heavy duty clutch. No need for a button. It won't slip.

Lightened flywheel about 5kg

Still got the rb20 g/box. If you speak to people in the know they seem to hold up pretty well if you treat them right.

Made 211 rwkw at ice at 6000rpm but the boost controller wouldn't hold boost past that and also without the cam gears ( should be around 230-240 now). The extra torque over an rb20 makes it a pleasure to drive around town. F all lag.

KYB Street Shocks

Stern 3 peice wheels 17 by 7.5 front and 8's on the rear with good tyres.

2xnismo lm gt4's 17 by 9.5 with 255's( wides rims you can fit under rear. MM's each side) worth around $850 each very nice and light rims.

Original GTR body kit

RB20det with a chipped cpu and r33 turbo and new timing belt.

Spare rb20det with turbo and stock ecu

Spare r32gtr turbo

Plus heaps of other spares

All in all a good reliable car that has never give me a problem

Looking for $19000 for everything and if it nobody is interested I'll be willing to sell the rb26 seperate since its probably worth around $5500 with everything and you can test it in the car. Do the maths and see what its worth to modify a car or buy one thats done. I'll try and get some pics soon.

Link to comment
https://www.sau.com.au/forums/topic/59031-r32-gtst-with-a-rb26dett/
Share on other sites

sounds nice man...u interseted in a trade for a heavly modded brand new repsray 180?

pm me if intersted..Cheers Adam

i have told you about posting in the for sale area, you are dodgy and you are now banned.

Christian

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • The 296mm rotors are the R33 turbo brakes. The 310mm rotors are the R34 turbo brakes. The calipers are nearly the same, but not. They're the same caliper but the R34 caliper has longer legs so that it sits out far enough to go over the rotor. The pads are the same for both. When you say, "I bough tsome EBC"....did you just mean pads? Or rotors? 310mm rotors fit under 17" wheels. There may be some wheels without enough clearance though. I can't fit my fingers between the barrel of my wheel and the "corners" of my R34 calipers, but there is plenty of room behind the spokes. This is on Enkei RPF1. You can fit 324mm rotors inside a 17" wheel, but I'd be willing to bet that it would be close to impossible with the Nissan/Sumitomo caliper (using an adapter, of course), because the Sumitomo caliper is fatter than the Brembo caliper that is supposed to go on the 324mm rotors.
    • Hi. Can someone tell me what brakes(and mainly WHERE) can i buy brakes on R34 GTT? I bought some EBC which SHOULD go on my car(i have GT but it has GTT brakes) but it does not fit, Brakes are "too" small(296mm) Are 310mm be good or? I have 17 inch wheel so no "big boys" but for me driving i just need one that fits and i can get here in EU/Czech.
    • Since winter isn't that harsh anymore in Poland, i will definetely drive it 365 days a year 😉. But if the snow hits i will try it for sure and let U know. Only swap i am planning to do is of course R34 GTR front 😍.
    • Hey. Very valuable information about pitwork, I will pay attention when buying any consumable parts 🙏 As for the carpets - I got a handful of information from nengun, from which it appears that indeed the carpets for the driver's side are OEM. They are not able to show me any pictures due to the long chain of different sales entities but after I place the order, as soon as the goods arrive at the nengun warehouse from which they will send the shipment to me they can send me photos and if my purchase differs from OEM I can immediately return it / cancel the purchase. I think I will give it a try 😉. Of course i'll let you know what's what as soon as i get them P.s. I know the topic is not relevant to the thread, but both nengun and amayama have these SICK 😍 trunk room lamps available. Do you know anyone who ordered them? I need to have one in my car
    • I've managed to find this: Nissan_Stagea_AutechVersion260RS (1).pdf
×
×
  • Create New...