Jump to content
SAU Community

Recommended Posts

Decided to finally sell my car. Bit the bullet and I'm looking to buy a gtr with 2530's or n1's.

It a grey late 92 gtst type M with an rb26 fitted. Bit of a sleeper. Drags off commodores and falcons with the dirt bike on the trailer.

I'll try and get the car registerd with the 26 next week but if that doesn't work I'll put the 20 back in.

Mods:

RB26dett with good compression around 160psi all cylinders

R33gtr turbos

2 1/2 inch front pipes into 3 inch then into a 2 3/4 inch trust exhaust (very very quiet, cops never ever pull me over)

Mines CPU with suprisingly good timing and fuel maps for oz fuel

Adjustable cam gears

Tube and fin fmic 600x300x76

daiken heavy duty clutch. No need for a button. It won't slip.

Lightened flywheel about 5kg

Still got the rb20 g/box. If you speak to people in the know they seem to hold up pretty well if you treat them right.

Made 211 rwkw at ice at 6000rpm but the boost controller wouldn't hold boost past that and also without the cam gears ( should be around 230-240 now). The extra torque over an rb20 makes it a pleasure to drive around town. F all lag.

KYB Street Shocks

Stern 3 peice wheels 17 by 7.5 front and 8's on the rear with good tyres.

2xnismo lm gt4's 17 by 9.5 with 255's( wides rims you can fit under rear. MM's each side) worth around $850 each very nice and light rims.

Original GTR body kit

RB20det with a chipped cpu and r33 turbo and new timing belt.

Spare rb20det with turbo and stock ecu

Spare r32gtr turbo

Plus heaps of other spares

All in all a good reliable car that has never give me a problem

Looking for $19000 for everything and if it nobody is interested I'll be willing to sell the rb26 seperate since its probably worth around $5500 with everything and you can test it in the car. Do the maths and see what its worth to modify a car or buy one thats done. I'll try and get some pics soon.

Link to comment
https://www.sau.com.au/forums/topic/59031-r32-gtst-with-a-rb26dett/
Share on other sites

sounds nice man...u interseted in a trade for a heavly modded brand new repsray 180?

pm me if intersted..Cheers Adam

i have told you about posting in the for sale area, you are dodgy and you are now banned.

Christian

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Forgot to include this but this is the mid section of my steering rack that looks like it has a thread/can be turned with that notch mentioned in the post:
    • Hey everyone, Wanted to pick some brains about this issue I'm having with rebuilding my 33 rack (PN is 49001-19U05). All of the tutorials/videos I've seen online are either R34 or S Chassis racks which seem to be pretty straightforward to disassemble but this process doesnt carry over to my rack. Few of the key differences that I've noted The pinion shaft on the other racks bolt on with 3 torx bolts: Whereas my rack bolts on with 2 allen head bolts: These changes are pretty inconsequential but the main difference is how you pull the actual rack out of the housing. The other skyline/s chassis racks can be taken out by tapping the rack out of the body with a socket and it just slides right out. I'm unable to do that with my rack because there's a hard stop at the end that doesn't let the seal/shaft be tapped out. Can also see a difference in the other end of the rack where mine has a notch that looks like you're able to use a big wrench to unthread 2 halves of the rack whereas the other racks are just kinda set in with a punch. My rack: Other racks: TLDR; Wanted to know if anyone has rebuilt this specific model of steering rack for the R33 and if there were any steps to getting it done easier or if I should just give this to a professional to get done. Sorry if this post is a bit messy, first one I've done.
    • I would just put EBC back on the "I would not use their stuff" pile and move on.
    • Can I suggest you try EBC directly again and link them to as many competitor catalogues as you can to show their listing is incorrect, eg https://dba.com.au/product/front-4000-series-hd-brake-rotor-dba42304/ If you have access to an R33 GTST VIN and your VIN, you could also use a Nissan Parts lookup like Amayama to show them the part number is different between 33 GTST and 34 GTT which may get their attention
    • So i got reply from EBC and they just this site where you can clearly see those 296mm fronts on R34 GTT. I send them photos and "quotes" that 296mm are not for 34 GTT and they are too small. But it will be very hard to return them cuz nobody here knows 100% and they just copy those EBC catalogue :-D https://ebcbrakesdirect.com/automotive/nissan/skyline-r34
×
×
  • Create New...