Jump to content
SAU Community

Recommended Posts

  • Replies 314
  • Created
  • Last Reply

Top Posters In This Topic

Troy your 32 was born to drift, they love it. I think drag is for people who can't drive (personal opinion) I can't drift very well but its heaps of fun. We should try and orgainise a day. Also nice shot of my car spinning it up over the top of the hill. Will anybody who took photos be at the meeting on tuesday beacause I don't have many pics of my car and I wouldn't mind some. Also troy do your spacers for your calipers have the holes opposite the old ones or are they offset?

Opposite or offset...?

Dont really get the question. The holes have the same centres, same bolting face as the std bolt holes, only they are 26mm further out. By same bolting face i mean the caliper is at the same offset relative to the rotor as std.

Meh, Drag racing is not as bad Gonorrhea, its more like herpes...it can be treated but there still doesnt seem to be any cure for those that love it:)

Hey guys, great day at the track..

I was talking to a guy from the WRX club today and he told me they compile a video each year of stuff from their track days, he asked if anyone has video footage they could contribute (especially things like andrew's flames which we all love).

Let me know via PM / this thread. I will post his email address as soon as i find where i bloody wrote it down!

-Patrick

I'm encouraging the old man to come down to the club meet. I may not be there. I'm sure I can find him a minder for the night :D

I've also given him the heads up about Winton pics too.

The next drift day, I may see if I can organise a photographers pass or something, and if the old man can't get out there, I'll get trigger happy instead.

Guest
This topic is now closed to further replies.



  • Latest Posts

    • Yes, I know🙄 but the sequential is not in my budget... don't want to reduce power neither, so looks like I'm stuck in the rabbit hole🤣
    • You’ll be very upset when you bust that too not to mention the gearing totally sucks. Don’t do it.
    • Is the panel filter one that is oiled? Have you ever cleaned or touched the AFM?
    • So.... the K&N air box thingo was too big, ended up gifting it to a mate, well, by gifting it he actually supplied food and beer at the pub,  which was nice, as it will not sit on a shelf in the garage for the next 10 years I did trim up some of the existing stuff to neaten it all up and gave it some wrinkle paint, unfortunately it currently has a used and abused mish mash of different types of hose clamps, 4 big fat T bolt type (shit), and a few normal clamps of vairing sizes and brands, but..... only until the 6 constant tension black worm clamps that I ordered from EFI solutions turn up next week Currently the current hose clamps are triggering me hard, LOL Is this the final version, probably not, I really want just 2 silicone pieces, a straight bit of silicone from the filter to the MAF is easy and will happen as soon as I head into Just Jap tomorrow, the problematic part is a 30° silicone bend from the MAF to the TB that I can connect the engine breather from the head, I found that there are bulk head fittings for boat bilge pumps that should work, but until I can get a 30° silicone bend the alloy pipe, and the 11ty thousand hose clamps, are there for the foreseeable future 4 hose clamps are golden, 6 are grudgingly acceptable, the 8 currently holding it all together is just taking the piss    I've also ordered 60 more retaining wall blocks for the front yard, I mis-gonculated the height that was required to get above the base of the Photinia's (red robin's) that are the hedge behind the front fence, currently it is 2 blocks high, and about 1/2 a block short, so going 3 blocks high will be above the base of the red robin's, and allow some room for mulch
×
×
  • Create New...