Jump to content
SAU Community

Recommended Posts

Hey all.

I have searched the forum but cant seem to find a definite answer to my questions.

Im gettin a bosch high flow 044 and wonderin if i should be upgrading the regulator or the injectors?

I'm only after about 250 - 300rwkw.

I've been checkin out 2 different sard regulators;

1. Sard regulator 8mm Nipple( apparently suited to my power goal and I dont have to upgrade the injectors??)

or;

2. Sard TYPE-R regulator (apparently suited for higher boost applications and larger injectors??)

Any help is appreciated.

:D

Link to comment
https://www.sau.com.au/forums/topic/60406-sard-regulators-and-injectors/
Share on other sites

You will struggle to get 250 out of the standard injectors without at least a new rising rate regulator. (and I wouldnt really consider 300)

If you are going to spend the $ requred to build a RELIABLE 300rwkw motor the $1000 (or a bit less) for new injectors will be only a small component.

Check out some of the other threads, but you will need to strenghen the internals (rods and pistons) turbo, intercooler, ECU etc etc. your up for several thousand to do this, then you have a problem of getting traction on a gtst with that much power.

Hey all.

I have searched the forum but cant seem to find a definite answer to my questions.

Im gettin a bosch high flow 044 and wonderin if i should be upgrading the regulator or the injectors?  

I'm only after about 250 - 300rwkw.

I've been checkin out 2 different sard regulators;

1. Sard regulator 8mm Nipple( apparently suited to my power goal and I dont have to upgrade the injectors??)

or;

2. Sard TYPE-R regulator (apparently suited for higher boost applications and larger injectors??)

Any help is appreciated.

:D

If you want a Fuel Pressure Regulator Sard TYpe R, i have one ..

PM me.!! $190

Forget the regulator and just get bigger injectors. Simple! I'd probably avoid SARD as they are single jet type and not all that ideal for DOHC heads. Nismo/Apex/HKS make quad jet designs which are much better.

They dont hold there fuel pressure.

Or just get a SX.. double the price of SARD but better then ANY fuel pressure regulator in the world.

F1 car's use SX.

Cheers

Forget the regulator and just get bigger injectors. Simple! I'd probably avoid SARD as they are single jet type and not all that ideal for DOHC heads. Nismo/Apex/HKS make quad jet designs which are much better.

Ya, a few guys have had problems with the SARD ones on RB25s

Nismo make 740cc only, but if you have a PowerFC there wont be a problem, and they are only an extra $50 or so over Apex/HKS 550cc ones so if someday you wanna go for 300-350 you'll be all set.

You wont need a fuel reg either. Im still using my stock one.

270rwkw - nismo 740cc injectors and no problems.]

cheerss - ash

been doin some more research and am curious if a set of S15 injectors would be more suitable. Apparantly these can fit straight on. How much power are these good for?? Can they handle over 250rwkw??

Also read that I may be better off goin for a gtr fuel pump. How much power are these good for?? can they also handle over 250rwkw?? how much is a good price for a gtr fuel pump??

With these upgrades would it be necassary to upgrade the AFM?? If so, any recommendations??

:)

  • 2 weeks later...

Hmm, I was going to go for the 700cc Sards, great price from Greenline however this is the first time I have read anything bad..

Could someone explain this Single v quad issue to DOHC's heads?

Is this an *issue* or will it run well... or are we talking go for HKS etc...

Hmm confused now. R32 GTR

:rofl:

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • The issue now is the 'fuel cut' while driving, and when it happend, it does not stall. This, I did not test the fuel pressure while driving as I cannot with a fuel pressure gauge. I do have Nistune logs, yes. I have also replaced the MAF Sensor.   Also related to the FPG Fuel Hanger – I just realized that I need a Deutsch Crimp Tool to crimp some cables for the FPG Fuel Hanger. Need to purchase additional cables as the kit only included 2, which are for the float. FPG has not responded to my emails so far since purchasing. I thought about taking it to someone and having it done professionally, but I am reluctant since everyone I took it to messed up in some way.  
    • There's a good German place in Brisbane if youre up for the drive 😛
    • The German place in Cabramatta was rock solid, fresh pretzel cooked to order back then. Then it went all quiet, after all the poker machines were removed, then I believe it closed for good. I did drive past the other week and noticed outdoor lighting a big screen, but no idea what is there now.  
    • Yeah I suspect even if you hold airmass per cycle/cylinder constant if you get too far away from stock you're still going to have problems running the factory tune within the bounds of the factory load scale. Cams, different displacement/rod ratio, etc. I'm just lucky that the GTIII-SS with wastegate boost + CA compliance cats is pretty much equivalent to stock turbos. When I have actual space I can finally get it tuned and modify the fuel system for flex fuel to 100% handle any detonation concerns when cranking the boost to whatever those dinky turbos can put out.
    • I would say no, why, because my daughter, who also lives in Goulburn, hasn't recommended us going there Pity, as we miss all the German joints around in Sydney, actually, the restaurants are the only thing I really miss about Sydney, and a special mention to Ishibanboshi at Bondi Junction, their Kara-age Don is heart cloggingly deliciousness (always added a special boiled egg...or 2) 😋 
×
×
  • Create New...