Jump to content
SAU Community

Recommended Posts

Hey all.

I have searched the forum but cant seem to find a definite answer to my questions.

Im gettin a bosch high flow 044 and wonderin if i should be upgrading the regulator or the injectors?

I'm only after about 250 - 300rwkw.

I've been checkin out 2 different sard regulators;

1. Sard regulator 8mm Nipple( apparently suited to my power goal and I dont have to upgrade the injectors??)

or;

2. Sard TYPE-R regulator (apparently suited for higher boost applications and larger injectors??)

Any help is appreciated.

:D

Link to comment
https://www.sau.com.au/forums/topic/60406-sard-regulators-and-injectors/
Share on other sites

You will struggle to get 250 out of the standard injectors without at least a new rising rate regulator. (and I wouldnt really consider 300)

If you are going to spend the $ requred to build a RELIABLE 300rwkw motor the $1000 (or a bit less) for new injectors will be only a small component.

Check out some of the other threads, but you will need to strenghen the internals (rods and pistons) turbo, intercooler, ECU etc etc. your up for several thousand to do this, then you have a problem of getting traction on a gtst with that much power.

Hey all.

I have searched the forum but cant seem to find a definite answer to my questions.

Im gettin a bosch high flow 044 and wonderin if i should be upgrading the regulator or the injectors?  

I'm only after about 250 - 300rwkw.

I've been checkin out 2 different sard regulators;

1. Sard regulator 8mm Nipple( apparently suited to my power goal and I dont have to upgrade the injectors??)

or;

2. Sard TYPE-R regulator (apparently suited for higher boost applications and larger injectors??)

Any help is appreciated.

:D

If you want a Fuel Pressure Regulator Sard TYpe R, i have one ..

PM me.!! $190

Forget the regulator and just get bigger injectors. Simple! I'd probably avoid SARD as they are single jet type and not all that ideal for DOHC heads. Nismo/Apex/HKS make quad jet designs which are much better.

They dont hold there fuel pressure.

Or just get a SX.. double the price of SARD but better then ANY fuel pressure regulator in the world.

F1 car's use SX.

Cheers

Forget the regulator and just get bigger injectors. Simple! I'd probably avoid SARD as they are single jet type and not all that ideal for DOHC heads. Nismo/Apex/HKS make quad jet designs which are much better.

Ya, a few guys have had problems with the SARD ones on RB25s

Nismo make 740cc only, but if you have a PowerFC there wont be a problem, and they are only an extra $50 or so over Apex/HKS 550cc ones so if someday you wanna go for 300-350 you'll be all set.

You wont need a fuel reg either. Im still using my stock one.

270rwkw - nismo 740cc injectors and no problems.]

cheerss - ash

been doin some more research and am curious if a set of S15 injectors would be more suitable. Apparantly these can fit straight on. How much power are these good for?? Can they handle over 250rwkw??

Also read that I may be better off goin for a gtr fuel pump. How much power are these good for?? can they also handle over 250rwkw?? how much is a good price for a gtr fuel pump??

With these upgrades would it be necassary to upgrade the AFM?? If so, any recommendations??

:)

  • 2 weeks later...

Hmm, I was going to go for the 700cc Sards, great price from Greenline however this is the first time I have read anything bad..

Could someone explain this Single v quad issue to DOHC's heads?

Is this an *issue* or will it run well... or are we talking go for HKS etc...

Hmm confused now. R32 GTR

:rofl:

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • The rain is the best time to push to the edge of the grip limit. Water lubrication reduces the consumption of rubber without reducing the fun. I take pleasure in driving around the outside of numpties in Audis, WRXs, BRZs, etc, because they get all worried in the wet. They warm up faster than the engine oil does.
    • When they're dead cold, and in the wet, they're not very fun. RE003 are alright, they do harden very quickly and turn into literally $50 Pace tyres.
    • Yeah, I thought that Reedy's video was quite good because he compared old and new (as in, well used and quite new) AD09s, with what is generally considered to be the fast Yokohama in this category (ie, sporty road/track tyres) and a tyre that people might be able to use to extend the comparo out into the space of more expensive European tyres, being the Cup 2. No-one would ever agree that the Cup 2 is a poor tyre - many would suggest that it is close to the very top of the category. And, for them all to come out so close to each other, and for the cheaper tyre in the test to do so well against the others, in some cases being even faster, shows that (good, non-linglong) tyres are reaching a plateau in terms of how good they can get, and they're all sitting on that same plateau. Anyway, on the AD08R, AD09, RS4 that I've had on the car in recent years, I've never had a problem in the cold and wet. SA gets down to 0-10°C in winter. Not so often, but it was only 4°C when I got in the car this morning. Once the tyres are warm (ie, after about 2km), you can start to lay into them. I've never aquaplaned or suffered serious off-corner understeer or anything like that in the wet, that I would not have expected to happen with a more normal tyre. I had some RE003s, and they were shit in the dry, shit in the wet, shit everywhere. I would rate the RS4 and AD0x as being more trustworthy in the wet, once the rubber is warm. Bridgestone should be ashamed of the RE003.
    • This is why I gave the disclaimer about how I drive in the wet which I feel is pretty important. I have heard people think RS4's are horrible in the rain, but I have this feeling they must be driving (or attempting to drive) anywhere close to the grip limit. I legitimately drive at the speed limit/below speed the limit 100% of the time in the rain. More than happy to just commute along at 50kmh behind a train of cars in 5th gear etc. I do agree with you with regards to the temp and the 'quality' of the tyre Dose. Most UHP tyres aren't even up to temperature on the road anyway, even when going mad initial D canyon carving. It would be interesting to see a not-up-to-temp UHP tyre compared against a mere... normal...HP tyre at these temperatures. I don't think you're (or me in this case) is actually picking up grip with an RS4/AD09 on the road relative to something like a RE003 because the RS4/AD09 is not up to temp and the RE003 is closer to it's optimal operating window.
    • Either the bearing has been installed backwards OR the gearbox input shaft bearing is loosey goosey.   When in doubt, just put in a Samsonas in.
×
×
  • Create New...