Jump to content
SAU Community

Recommended Posts

ORRIIITE!

I picked up my car last night! VERY Impressed, and apart from using $20/fuel for 130kms, i think i did pretty well....

While looking around the car, I noticed a few other things:

I have clear side repeaters, IIRC these were an option ?

THE CAR STALLS WITH AN ATMO BOV!!!! Someone help me! This is pretty dangerous if i think i got power to boot and there's nothing there!

I got a TRUST exhaust at the back, I don't know if it's a catback or turbo-back as the front pipe looks VERY wide/mandrel bent... (Troy, you can confirm this for me!)

When I'm going 100+ in 5th gear there's a "grindy/groan" coming from the rear that sounds a bit like a diff.... a tad concerning....

On the "replace oil at" sticker on the windshield it says they used Mobil Synth S oil... is this good ? or crap ?

Oil pressure gauge: When cruising along the freeway, it sits anywhere between the 4 and the little mark just obove the 4, is this normal ?

well, thx for any help guys, i'm sure there'll be more questions...

-Kym.

Link to comment
https://www.sau.com.au/forums/topic/6075-got-my-car-questions-questions/
Share on other sites

Kym,

Good to see you have the line at last.

Clear side indicators can be bought for $125 from most import part places, I put a set on mine last week. Look horny and say Nismo so if a cop ever argues about the legality just say they are factory and point to the name on them... he he he

My car used to stall with an atmo bov to until I got the Power FC... The safc will also fix this.. I have a stock bov if you want to go back to standard, I don't want anything for it so if ya want it holla!!!!

A standard dump pipe should still have the metal heat shield still covering it, if it doesn't and the pipes look custom made I'd say it's been changed... :(

Not sure about the sound from the rear... get it checked....

From memory my oil gauge sits around there to when cruising... and Mobil synthetic is pretty good, first thing I'd do is change ALL oils (geabox, diff, engine ect) just to be on the safe side...

Anyway enjoy the new ride buddy...

Brett

Congrats on the car. If you want economy - stay off boost. this is alot easier said than done though:)

As for your stalling with atmo bov, I have one and I dont have any troubles. If it is adjustable, it may just be a case of adjusting the thing a little, if not you may need to change it over. If you want to do this on the cheap, see if you can source a factory one from a performance tuning shop - they probably wont charge you much as mostly when people get aftermarket ones the shop will bin the factory one. I can recommend a turbosmart type 2, I have one and it is excellent - no stalling and virtually no backfiring with stock ECU.

The stock dump pipes are cast iron and the stock front pipe is too I think?? and have heat shield on them, if yours is mandrel bent you can be pretty sure its aftermarket - and a pretty good mod for free.

Thanks Brett and Steve,

I'll get an SAFC pretty soon anyway....

It still has the stock BOV installed to, the Blitz one is under the airbox plastic (out of sight) so i can hookup the stocker if need be :(

Does anyone know how to adjust a Blitz BOV ?

i had the same problem when mine came over with a blitz bov, the stalling.

You can adjust it in with a size 10 alan key I believe, the guy at xspeed did this for me for free, but if you have the key im sure you can do it yaself :)

if you cant find the part to screw in i can take a pic and point it out for you.

Are both BOV's venting? ie: is the std one still hooked up? This will cause problems on its own. I had a plate made up so that the std one could be blocked up. In the end I tossed the atmo bov its more problems then its worth. They make your car run extra rich, so you use more fuel and loose power, and they make your car stall because the AFM has no idea whats going on because instead of returning the air to the intake its going out to the atmo.

Rob

Originally posted by rob77

Are both BOV's venting? ie: is the std one still hooked up? This will cause problems on its own. I had a plate made up so that the std one could be blocked up. In the end I tossed the atmo bov its more problems then its worth. They make your car run extra rich, so you use more fuel and loose power, and they make your car stall because the AFM has no idea whats going on because instead of returning the air to the intake its going out to the atmo.

Rob

hence, S-AFC

Originally posted by rob77

In the end I tossed the atmo bov its more problems then its worth. They make your car run extra rich, so you use more fuel and loose power, and they make your car stall because the AFM has no idea whats going on because instead of returning the air to the intake its going out to the atmo.

Rob

Hmm..mine doesn't

I have atmos (TS type II) where the stockie was.. no stalling no high revs -idles bout 650-750.

And fuel consumption is the same with the stockie. Prob must be elsewhere..

Point to discuss though.. When the BOV expires.. You've lifted off.. less gas going through.

therefore, does an atmos run that extra rich? The AFM will get the accurate reading again in a sec. Cos the proccess is still going..

Bout the same time your back on the gas...

yes/no?

run rich? not really. it will run rich for a split second until you accelerate again, so difference is neglible.

the stalling seems to be mroe with the louder 'ricier' BOV's. so despite the fact they sound rediculous this could also put u off buying a blow off trumpet!

SAFC and most other fuel controllers will fix this and gain power, which has been well documented

the std BOV causes problems as well, it leaks boost. it was designed to run on a std car, std cars run 7-8psi. when u start getting up around 1bar it will leak, causing more problems. replace it!

Random license and rego check (apparently)

YES, he mentioned the BOV.... called me out of the car and shine'd his torch right under the stocker airbox and says "what does that look like to you son?"

uhhh... "it's a blow off valve sir!"

him: " you DO know they're illegal right?"

uhhhh "yes, I know sir, I'm taking it off tomorrow... it makes the car stall!"

him "very well....."

*drives off VERY slowly as to not sound BOV again* hahah

When I bought my car it was disconnected.... It got reconnected before I took delivery tho'

I think it's got something to do with emissions, any change with airflow etc can affect emissions... long story.. dont ask :) It's basically cop bait for your car ....

vvroooooommm *psshhht pick me* vvrooooooommmm *pssht pick me!* vroooooommm *psssht no really, come get me!*

(insert lights and sirens here)

Steve - there only illegal if you vent to atmo as it coencides with emission laws as your supposed to vent it back through the filtered intake

Stric9 well done mate..

Ill have a go at the main subject questions if u like..

1. If ou want fuel economy buy a sonata :lol:

2. I think your car is stalling because your BOV could be faulty. myself and others have never come across this problem.

3. Not sure about the diff it maybe the Hicas tho? another thing to get checked out while its in warranty, may just need an oil somewhere

4. Mobil fully synthetic is top stuff as far as i know.

5. My oil press gauge reads at 4 as well np

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Can I suggest you try EBC directly again and link them to as many competitor catalogues as you can to show their listing is incorrect, eg https://dba.com.au/product/front-4000-series-hd-brake-rotor-dba42304/ If you have access to an R33 GTST VIN and your VIN, you could also use a Nissan Parts lookup like Amayama to show them the part number is different between 33 GTST and 34 GTT which may get their attention
    • So i got reply from EBC and they just this site where you can clearly see those 296mm fronts on R34 GTT. I send them photos and "quotes" that 296mm are not for 34 GTT and they are too small. But it will be very hard to return them cuz nobody here knows 100% and they just copy those EBC catalogue :-D https://ebcbrakesdirect.com/automotive/nissan/skyline-r34
    • Hi, is the HKS  Tower Bar still available ? negotiable ? 🤔
    • From there, it is really just test and assemble. Plug the adapter cables from the unit into the back of the screen, then the other side to the car harness. Don't forget all the other plugs too! Run the cables behind the unit and screw it back into place (4 screws) and you should now have 3 cables to run from the top screen to the android unit. I ran them along the DS of the other AV units in the gap between their backets and the console, and used some corrugated tubing on the sharp edges of the bracket so the wires were safe. Plug the centre console and lower screen in temporarily and turn the car to ACC, the AV should fire up as normal. Hold the back button for 3 sec and Android should appear on the top screen. You need to set the input to Aux for audio (more on that later). I put the unit under the AC duct in the centre console, with the wifi antenna on top of the AC duct near the shifter, the bluetooth antenna on the AC duct under the centre console The GPS unit on top of the DS to AC duct; they all seem to work OK there are are out of the way. Neat cable routing is a pain. For the drive recorder I mounted it near the rear view mirror and run the cable in the headlining, across the a pillar and then down the inside of the a pillar seal to the DS lower dash. From there it goes across and to one USB input for the unit. The second USB input is attached to the ECUtec OBD dongle and the 3rd goes to the USB bulkhead connected I added in the centre console. This is how the centre console looks "tidied" up Note I didn't install the provided speaker, didn't use the 2.5mm IPod in line or the piggyback loom for the Ipod or change any DIP switches; they seem to only be required if you need to use the Ipod input rather than the AUX input. That's it, install done, I'll follow up with a separate post on how the unit works, but in summary it retains all factory functions and inputs (so I still use my phone to the car for calls), reverse still works like factory etc.
    • Place the new daughterboard in the case and mount it using the 3 small black rivets provided, and reconnect the 3 factory ribbon cables to the new board Then, use the 3 piggyback cables from the daughterboard into the factory board on top (there are stand offs in the case to keep them apart. and remember to reconnect the antenna and rear cover fan wires. 1 screw to hold the motherboard in place. Before closing the case, make a hole in the sticker covering a hole in the case and run the cable for the android unit into the plug there. The video forgot this step, so did I, so will you probably. Then redo the 4 screws on back, 2 each top and bottom, 3 each side and put the 2 brackets back on.....all ready to go and not that tricky really.      
×
×
  • Create New...