Jump to content
SAU Community

Recommended Posts

ORRIIITE!

I picked up my car last night! VERY Impressed, and apart from using $20/fuel for 130kms, i think i did pretty well....

While looking around the car, I noticed a few other things:

I have clear side repeaters, IIRC these were an option ?

THE CAR STALLS WITH AN ATMO BOV!!!! Someone help me! This is pretty dangerous if i think i got power to boot and there's nothing there!

I got a TRUST exhaust at the back, I don't know if it's a catback or turbo-back as the front pipe looks VERY wide/mandrel bent... (Troy, you can confirm this for me!)

When I'm going 100+ in 5th gear there's a "grindy/groan" coming from the rear that sounds a bit like a diff.... a tad concerning....

On the "replace oil at" sticker on the windshield it says they used Mobil Synth S oil... is this good ? or crap ?

Oil pressure gauge: When cruising along the freeway, it sits anywhere between the 4 and the little mark just obove the 4, is this normal ?

well, thx for any help guys, i'm sure there'll be more questions...

-Kym.

Link to comment
https://www.sau.com.au/forums/topic/6075-got-my-car-questions-questions/
Share on other sites

Kym,

Good to see you have the line at last.

Clear side indicators can be bought for $125 from most import part places, I put a set on mine last week. Look horny and say Nismo so if a cop ever argues about the legality just say they are factory and point to the name on them... he he he

My car used to stall with an atmo bov to until I got the Power FC... The safc will also fix this.. I have a stock bov if you want to go back to standard, I don't want anything for it so if ya want it holla!!!!

A standard dump pipe should still have the metal heat shield still covering it, if it doesn't and the pipes look custom made I'd say it's been changed... :(

Not sure about the sound from the rear... get it checked....

From memory my oil gauge sits around there to when cruising... and Mobil synthetic is pretty good, first thing I'd do is change ALL oils (geabox, diff, engine ect) just to be on the safe side...

Anyway enjoy the new ride buddy...

Brett

Congrats on the car. If you want economy - stay off boost. this is alot easier said than done though:)

As for your stalling with atmo bov, I have one and I dont have any troubles. If it is adjustable, it may just be a case of adjusting the thing a little, if not you may need to change it over. If you want to do this on the cheap, see if you can source a factory one from a performance tuning shop - they probably wont charge you much as mostly when people get aftermarket ones the shop will bin the factory one. I can recommend a turbosmart type 2, I have one and it is excellent - no stalling and virtually no backfiring with stock ECU.

The stock dump pipes are cast iron and the stock front pipe is too I think?? and have heat shield on them, if yours is mandrel bent you can be pretty sure its aftermarket - and a pretty good mod for free.

Thanks Brett and Steve,

I'll get an SAFC pretty soon anyway....

It still has the stock BOV installed to, the Blitz one is under the airbox plastic (out of sight) so i can hookup the stocker if need be :(

Does anyone know how to adjust a Blitz BOV ?

i had the same problem when mine came over with a blitz bov, the stalling.

You can adjust it in with a size 10 alan key I believe, the guy at xspeed did this for me for free, but if you have the key im sure you can do it yaself :)

if you cant find the part to screw in i can take a pic and point it out for you.

Are both BOV's venting? ie: is the std one still hooked up? This will cause problems on its own. I had a plate made up so that the std one could be blocked up. In the end I tossed the atmo bov its more problems then its worth. They make your car run extra rich, so you use more fuel and loose power, and they make your car stall because the AFM has no idea whats going on because instead of returning the air to the intake its going out to the atmo.

Rob

Originally posted by rob77

Are both BOV's venting? ie: is the std one still hooked up? This will cause problems on its own. I had a plate made up so that the std one could be blocked up. In the end I tossed the atmo bov its more problems then its worth. They make your car run extra rich, so you use more fuel and loose power, and they make your car stall because the AFM has no idea whats going on because instead of returning the air to the intake its going out to the atmo.

Rob

hence, S-AFC

Originally posted by rob77

In the end I tossed the atmo bov its more problems then its worth. They make your car run extra rich, so you use more fuel and loose power, and they make your car stall because the AFM has no idea whats going on because instead of returning the air to the intake its going out to the atmo.

Rob

Hmm..mine doesn't

I have atmos (TS type II) where the stockie was.. no stalling no high revs -idles bout 650-750.

And fuel consumption is the same with the stockie. Prob must be elsewhere..

Point to discuss though.. When the BOV expires.. You've lifted off.. less gas going through.

therefore, does an atmos run that extra rich? The AFM will get the accurate reading again in a sec. Cos the proccess is still going..

Bout the same time your back on the gas...

yes/no?

run rich? not really. it will run rich for a split second until you accelerate again, so difference is neglible.

the stalling seems to be mroe with the louder 'ricier' BOV's. so despite the fact they sound rediculous this could also put u off buying a blow off trumpet!

SAFC and most other fuel controllers will fix this and gain power, which has been well documented

the std BOV causes problems as well, it leaks boost. it was designed to run on a std car, std cars run 7-8psi. when u start getting up around 1bar it will leak, causing more problems. replace it!

Random license and rego check (apparently)

YES, he mentioned the BOV.... called me out of the car and shine'd his torch right under the stocker airbox and says "what does that look like to you son?"

uhhh... "it's a blow off valve sir!"

him: " you DO know they're illegal right?"

uhhhh "yes, I know sir, I'm taking it off tomorrow... it makes the car stall!"

him "very well....."

*drives off VERY slowly as to not sound BOV again* hahah

When I bought my car it was disconnected.... It got reconnected before I took delivery tho'

I think it's got something to do with emissions, any change with airflow etc can affect emissions... long story.. dont ask :) It's basically cop bait for your car ....

vvroooooommm *psshhht pick me* vvrooooooommmm *pssht pick me!* vroooooommm *psssht no really, come get me!*

(insert lights and sirens here)

Steve - there only illegal if you vent to atmo as it coencides with emission laws as your supposed to vent it back through the filtered intake

Stric9 well done mate..

Ill have a go at the main subject questions if u like..

1. If ou want fuel economy buy a sonata :lol:

2. I think your car is stalling because your BOV could be faulty. myself and others have never come across this problem.

3. Not sure about the diff it maybe the Hicas tho? another thing to get checked out while its in warranty, may just need an oil somewhere

4. Mobil fully synthetic is top stuff as far as i know.

5. My oil press gauge reads at 4 as well np

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Haha, i kow right? Could have bought so many cars for the same amount of money (or less) but driving Unicorn gives you at least +1mln to style 😅. Like wise man said "life's to short to drink cheap wine and drive boring cars" 😉
    • Newbie here, proud owner of an Autech 260RS. I'm on the hunt for wiring diagrams specific to the 260RS, particularly S1. I've ran my eyes through R33, R34 Diagrams, there are some similarities, however continue to find incorrect wire colours and pins on connectors in the 33,34 diagrams.   I was hoping someone could point me in the right direction? I'd be happy to pay for the originals in Japanese. I can translate them, at least they would be accurate.   Any help please would be greatly appreciated, never heard an RB26DETT before let alone driven one, and I've got a spaghetti monster of goodness to sort out.   Cheers Benny  
    • Hey all  im wondering if you can help me please I have put a rb20 box in my r34 gtt as my auto packed up and a friend had a spare box I know it’s not ideal but it will get me up and running for now. we have done the conversation and everything is working great but my Speedo we got a s13 speed sensor but my Speedo reads double now and I bought a speed converter but still not having any luck.  so I thought I’ll reach out and pick your brains  any help would be appreciated please as I wanna drive my car again 
    • Drain it. I got official Matic D but you can get whatever is listed as Matic D compatible.
    • Thanks guys,  Yeah I should at least have them dynoed, at least then I know what I've got as a starting point.  The springs on these are hard as rocks. I vaguely remember Russman saying he was going to sell the shocks to me with the rocks fitted, as he was keeping the softer springs for his new setup.  I didn't click at the time but of course that was to let me know the shock/spring wouldn't be matched.  I also remember pricing up new springs around 2014-15, but, house, money etc. it never happened. So that was another reason to have them rebuilt. I have rebuilt the forks on many motorcycles so I think I could handle the seals on these easily enough, but getting the valving right would be a rabbit hole I cbf exploring.  Duncan, interesting to hear RP was tuning these back then. I might give them a call.  In the mean time I have been busy fitting sway bars. The Whiteline rear sway bar I purchased 15 years ago finally got fitted, along with the Whiteline front bar that showed up last week. Just waiting on new links for the front sway bar to finish that off.  And my spare set of advan AVS VS5's should be back from the powder coaters in a Pearl White finish sometime this week, with a set of Hankook RS4's lined up for fitting.  And then I just have all the suspension bushes to do. A comprehensive kit is on the way... Lots to do before the Ararat hill climb. Cheers guys 🍻   
×
×
  • Create New...