Jump to content
SAU Community

Recommended Posts

  • 4 years later...

Decided not to noob up and start a new thread with the same questions and info.

From my ride thread.

Bodykit is ordered. Im awaiting its delivery any day. I got the bomex front bar, a modified bomex rear bar for 4 door application, and a set of modified gtr skirts. Bonnet arrives today - carbon of course.

Nissan-R34-TopSecret-Bomex-Frontbar.jpg

Nissan-R34-TopSecret-Bomex-Rearbar.jpg

r34-side-skirts-j.gif

r34bxcbonnet.jpg

r34bxcbonnet2.jpg

Once its painted and fitted that may do me for a while. See how the bug hits me. im already keen on changing tail lights for the gtr version thats for sure so im sure knowing me it'll be a matter of time before it gets out of hand...

Here's my understanding of bodykits for r34 and inparticular 4 door versions from my researchings over the last few weeks...

East bear - available at a very high price but a solid look, very boxed but still agressive.

Uras - its common as hell IMO and is basically the kit available on most rides out there, simply skirting off the bumper, is not custom enough for me. if you can buy it on ebay its hardly a one off...

Bomex/C West - bit of a blurry line as to whats what but in the 4 door only the front bars available so far. Im not a fan of the snow plow look so i started searching suppliers to see what else is around in oz.

Ordering my kit:

As i understand it the front bars on the 4 door gtt are no different to any other 2 door gtt, so the bomex was an easy choice for me. As was the carbon bonnet. They checked into it to be sure and confirmed the front bars and bonnet are same.

The side skirts require stretching on my guys advice and he just so happened to have a set of stretched r34 gtr ones available. Hopefully they turn out nicely.

The rear bar of course being different was chopped and adjusted to suit and again in my case was attainable as it was lying around almost done. Mines been symettrically matched and the flutes removed so it could be an interesting look.

Hopefully this will start a wave of kits based on the 4 door model r34 but who knows it could all go pear shaped and i end up with some lines that dont mesh right, or a kit thats just not suited to the shape of the 4 door looking forced or wrapped into position.

Im a big fan of the 4 door so far as its a commonly overlooked model, thats IMO got styling appeal all of its own... Fingers crossed it works out. The wheels are my next pondering, im just not sure how they'll end up lookin after it's done...

Nice kits, i wish they had those GTT Badges here. What i would do for those..................

also i saw the GTT 700BHP RB30 in the redline magazine, that things a monster. i love the front and rear guards on it.

seen them on ebay quite a bit $20-30 or so..

Hi Denis if you ever see a link on ebay for those badges please let me / us know, thanks mate., im on ebay every day seriously lol(the wonders of mobile technology) and im yet to find one.

cheers,

David.

definately a fan of the c west lines and the sleek look of it for sure. I love the jdl kit too, but the full one was over done for me.

Always annoying though theres never much around in 4 door and there's no shortage of hot combo's for the 2 door. Thats a good thing for a guy like me though.

They have all of these photos on their website, but there is something about them that looks so photoshopped.

post-40562-1240264121_thumb.jpg post-40562-1240264140_thumb.jpg post-40562-1240264165_thumb.jpg

im just about to change my kit from cwest front, sides and bomex rear to do luck front, bomex sides and rear.. IMHO its one of the better looking kits out there, ive never really been into bit kits on 34's but never really appreciated the standard kits either... i think you can never go wrong with bomex sides and rear but do luck front bar gives 34 great presence.

21155245.png

although u can forget about speed bumps, steep driveways, most shopping centres, maccas, and hit and runs on small children... cause the ground clearance aint exactly optimal.

Edited by Sammy34
im just about to change my kit from cwest front, sides and bomex rear to do luck front, bomex sides and rear.. IMHO its one of the better looking kits out there, ive never really been into bit kits on 34's but never really appreciated the standard kits either... i think you can never go wrong with bomex sides and rear but do luck front bar gives 34 great presence.

although u can forget about speed bumps, steep driveways, most shopping centres, maccas, and hit and runs on small children... cause the ground clearance aint exactly optimal.

ive always had a soft spot for the do-luck kit, the full kit is quite hot, but never mind hit and runs, that front bar will swallow some small children whole!

  • 2 months later...

hey guys im planning on this front bar l_826852e0cfd84a20b1d86461fd5a47d6.png

just confirming is that a top secret bar? anybody know where to get that exact one from?

i've seen alot of different versions of top secret front bars.

planning on putting a vented hood from vivagarage (type W), would put a pic but their site is copyrighted, sorry

and impul sides. not too sure on rear, didnt like the impul rear thaat much.

also planning to put on volk gt-c or stock gt-r rims on the car too.

any opinions :)? especially regarding the rear bumper

Edited by Jonno34
hey guys im planning on this front bar l_826852e0cfd84a20b1d86461fd5a47d6.png

just confirming is that a top secret bar? anybody know where to get that exact one from?

i've seen alot of different versions of top secret front bars.

planning on putting a vented hood from vivagarage (type W), would put a pic but their site is copyrighted, sorry

and impul sides. not too sure on rear, didnt like the impul rear thaat much.

also planning to put on volk gt-c or stock gt-r rims on the car too.

any opinions :)? especially regarding the rear bumper

It is Top Secret, I have one. Check my Garage in profile.

I got mine from PSI parts, It was a good fit, not great. I run carbon cannards and there was not enough of a lip underneath to mount them optimally.

ah thats good then, i was planning on getting my Impul sides from psiparts as well, would be nice to get my whole kit from them.

anybody got any recommendations on rear bumper? i wasnt too into the Impul rear, im more into a stock gt-r look rear bumper, but the only company that makes something like that is east bear and im not really able to pay their prices...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Have a vb in honour of the car comming back
    • It was a great, but typical track day, and some VB was ingested at the night time debrief 🤪
    • And so, to round this out, I couldn't be happier to confirm @MBS206 has decided to buy the car. He drove down from sunny QLD with a trailer last week and it is off to its new home today. I'll let Matt confirm on next steps but I understand broadly that the plan is to leave it pretty much as is, and just get some quality wheel time with a nicely balanced car that is pretty much track ready. There are a few a jobs still to be done first but nothing too major and I think its a very smart buy Dinner last night at the Paragon with a round of VBs (mostly) for Neil
    • Well, 50 pages and the end of a chapter for this car. We took it out for a shakedown at Wakie yesterday, and everything went well. There were a couple of niggles: - Oil cooler fitting leak - tightened, cleaned, stopped leaking - Radiator cap overflow fitting was leaking....Mark called it, the overflow fitting was threaded in and not tight....tightened, tested and held pressure - Small oil leak at the rear of the block, probably the turbo oil feed - too hot to get at it comfortably but probably just needs to be nipped up - leak at the driver's side rear brake line where it meets the hardline. Fitting wasn't loose, so Matt backed it off and back on, no further leaks - there's also a leak somewhere on the top of the fuel tank, maybe that cross over fuel line - that was has been left to fix when its on a hoist Otherwise than those niggles the car went great, turned great and stopped great so it was a very successful day out. I'm always really nervous when a car first hits the track after a long break, especially with a brand new engine as well but it was great. VID-20251011-WA0007.mp4  Big thanks to @The Bogan who dropped by and helped out, @MBS206 and my nephew Lachlan the apprentice.  Neil's wife Mel also surprised the hell out of all of us by dropping by; she's up in Tamworth these days but was travelling to Melbourne so had plausible deniability for turning up at the garage, it was great to see her but also obviously a bit sad all round.
    • Skyline R33 Series 2 sedan tail lights in excellent condition. These are becoming harder to find, especially in this state.    BOTH SETS ARE IN FANTASTIC CONDITION (REFER TO PHOTOS)    ✅ No broken covers or cracks ✅ Lenses are in flawless condition ✅ All rear mounting lugs intact ✅ Comes complete as pictured ✅ Perfect for restoration, replacement, or upgrade   These lights are ready to go, no surprises just quality OEM parts.   These are definitely one of the better sets we have seen in a while. With minimal wear and tear they will come as you see. Bear in mind they are not brand new they are almost 30 years old now. To find them in this condition isn’t easy they can only be obtained on the second hand market.   Australia Wide Postage Available At Buyers Expense. Silver Set:$850 Grey Set:$850 PM Me for purchase or any other questions  IMG_2166.dng IMG_2165.dng IMG_2172.dng IMG_2173.dng IMG_2174.dng IMG_2179.dng IMG_2180.dng IMG_2260.dng IMG_2258.dng IMG_2259.dng IMG_2261.dng IMG_2266.dng IMG_2273.dng IMG_2274.dng IMG_2276.dng
×
×
  • Create New...