Jump to content
SAU Community

Recommended Posts

Hi .. i'm keen on a battery and i'm in Melbourne.

No problem , i've send them interstate before but it will cost you extra $20 , that includes insurance , so if it gets lost you get your money back or another battery .

  • Replies 376
  • Created
  • Last Reply

Top Posters In This Topic

Top Posters In This Topic

Posted Images

G'day Jerry.... my engine is fresh (1500km) and is quiet strong from all reports (only getting a knock of 12 on the PFC when BEL tuned it!!!!)

I have no idea on clutches!!! it seems to be one of lifes mysteries.... hmmmm

I am leaning towards a nismo stlye twin plate good for about 600ps...

once I get the clutch I will be going for 1.4 BAR as a few guys in the UK are using this level safely with similar spec engines....

let me know what times you run with the big ship :D

I want one, but im in sydney and I need one fairly quickly, about a week..

so im deciding weather to spend the extra and get one quicker.

how many more people do you need?

I dont know who wants one for sure .

Looks like sleek , wetgtr, insant , zillars , pavel and you , if all the above want one thats 6 all up so its a goer even if someone doesn't want thats fine .

Would everyone that wants one for sure please post or pm in the next few days and then i can order them on monday , i would then have them at my place in west pennant hills on wed the latest .

Sydney people pay on pick up and interstaters d/d when i have the batteries here , then i will post a.s.a.p. , probably the next day .

I dont know who wants one for sure .

Looks like sleek , wetgtr, insant , zillars , pavel and you , if all the above want one thats 6 all up so its a goer even if someone doesn't want thats fine .

Would everyone that wants one for sure please post or pm in the next few days and then i can order them on monday , i would then have them at my place in west pennant hills on wed the latest .

Sydney people pay on pick up and interstaters d/d when i have the batteries here , then i will post a.s.a.p. , probably the next day .

Hi jerry,

Put me down for 1 battery as well---Boj

another quick question, are these dry cell? would I be able to mount the battery on its side?

Its what they call a gel cell and you can mount them on their side even upside down if you want .

wrxhoon, is it still possible to get in on this? If yes, could you please confirm price for delivery to Adelaide and I'll advise if I'm in.

Yes you can still go in this , i will be ordering them on monday or tuesday .

All up delivered to your local port office $160 .

Let me know a.s.a.p.

Hi wrxhoon, do you have any left?

I'm in sydney, hills area. Would I be able to pick one up?

Yes you can , i'm in West Pennant Hills , should have them on Wednesday .

I'll put you down for one .

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • Hi, SteveL Thank you very much for your reply, you seem to be the only person on the net who has come up with a definitive answer for which I am grateful. The "Leak" was more by way of wet bubbles when the pedal was depressed hard by a buddy while trying to gey a decent pedal when bleeding the system having fitted the rebuilt BM50 back in the car, which now makes perfect sense. A bit of a shame having just rebuilt my BM50, I did not touch the proportioning valve side of things, the BM50 was leaking from the primary piston seal and fluid was running down the the Brake booster hence the need to rebuild, I had never noticed any fluid leaking from that hole previously it only started when I refitted it to the car. The brake lines in the photo are "Kunifer" which is a Copper/Nickel alloy brake pipe, but are only the ones I use to bench bleed Master cylinders, they are perfectly legal to use on vehicles here in the UK, however the lines on the car are PVF coated steel. Thanks again for clearing this up for me, a purchase of a new BMC appears to be on the cards, I have been looking at various options in case my BM50 was not repairable and have looked at the HFM BM57 which I understand is manufactured in Australia.  
    • Well the install is officially done. Filled with fluid and bled it today, but didn't get a chance to take it on a test drive. I'll throw some final pics of the lines and whatnot but you can definitely install a DMAX rack in an R33 with pretty minor mods. I think the only other thing I had to do that isn't documented here is grind a bit of the larger banjo fitting to get it to clear since the banjos are grouped much tighter on the DMAX rack. Also the dust boots from a R33 do not fit either fyi, so if you end up doing this install for whatever reason you'll need to grab those too. One caveat with buying the S15 dust boots however is that the clamps are too small to fit on the R33 inner tie rod since they're much thicker so keep the old clamps around. The boots also twist a bit when adjusting toe but it's not a big deal. No issues or leaks so far, steering feels good and it looks like there's a bit more lock now than I had before. Getting an alignment on Saturday so I'll see how it feels then but seems like it'll be good to go       
    • I don't get in here much anymore but I can help you with this.   The hole is a vent (air relief) for the brake proportioning valve, which is built into the master cylinder.    The bad news is that if brake fluid is leaking from that hole then it's getting past the proportioning valve seals.   The really bad news is that no spare parts are available for the proportioning valve either from Nissan or after market.     It's a bit of a PITA getting the proportioning valve out of the master cylinder body anyway but, fortunately, leaks from that area are rare in my experience. BTW, if those are copper (as such) brake lines you should get rid of them.    Bundy (steel) tube is a far better choice (and legal  in Australia - if that's where you are).
×
×
  • Create New...